Global
Close
Ratings / Performance
| Sensing method | Through-beam |
|---|---|
| Sensing distance | 0 mm to 800 mm |
| Standard sensing object | Opaque: 6.25 mm dia. Min. |
| Directional angle | Emitter:10 to 25 DEG Receiver:10 to 25 DEG |
| Light source | Infrared LED (950nm) |
| Power supply voltage | 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) |
| Current consumption | Emitter: 25mA DC Max., Receiver: 15mA DC Max. |
| Control output (Output type) | NPN voltage-current output |
| Control output (Load current) | 0 to 80 mA |
| Control output (Residual voltage) | (DC) 1 V Max. (Load current 80mA Max.) |
| Operation mode | Dark-ON |
| Load power supply voltage | 24 VDC Max. |
| Protective circuit | Surge suppressor Output short-cut protection Power supply reverce polarity protection |
| Response time | 5 ms Max. |
| Ambient illuminance | Incandescent lamp:3000 lux Max. |
| Ambient temperature | Operating: -25 to 55 CEL Storage: -30 to 70 CEL (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85 %RH Storage: 35 to 95 %RH (with no condensation) |
| Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 500 VAC at 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Applicable standard (EC Directive (EMC Directive)) | CE marking: Not equipped |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Light indicator(red), Power indicator(red) |
| Weight (packed state) | approx. 100 g |
| Material (case) | Fluoride resin |
| Material (mounting bracket) | Stainless steel(SUS304) |
| Accessories | Instruction manual, Mounting bracket, Slotted/philips screws M3*10 |
As of January 8, 2008
Top of page
