Global
Close
Ratings / Performance
| Sensing method | Through-beam |
|---|---|
| Sensing distance | 0 m to 0.2 m (When paper pack passage) |
| Standard sensing object | Liquid and solid in a paper pack: 11 mm dia. Min. |
| Directional angle | Emitter:10 to 30 DEG Receiver:10 to 30 DEG |
| Light source | Infrared LED (890nm) |
| Power supply voltage | 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) |
| Current consumption | Emitter: 25mA DC Max., Receiver: 20mA DC Max. |
| Control output (Output type) | NPN voltage-current output |
| Control output (Load current) | 0 to 80 mA |
| Control output (Residual voltage) | (DC) 1 V Max. (Load current 80mA Max.) |
| Operation mode | Light-ON/Dark-ON selectable |
| Load power supply voltage | 24 VDC Max. |
| Protective circuit | Surge suppressor Output short-cut protection Power supply reverce polarity protection |
| Response time | 10 ms Max. |
| Sensitivity setting | Single-turn adjustment |
| Self-diagnostic output | Load current: 50 mA Max. |
| Self-diagnostic output delay | 500ms Min. |
| Ambient illuminance | Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max. |
| Ambient temperature | Operating: -10 to 55 CEL Storage: 0 to 65 CEL (with no icing or condensation) |
| Ambient humidity | Operating: 35 to 85 %RH Storage: 35 to 95 %RH (with no condensation) |
| Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Applicable standard (EC Directive (EMC Directive)) | CE marking: Not equipped |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Light indicator(red), Stability indicator(green), Power indicator(red) |
| Weight (packed state) | approx. 155 g |
| Material (case) | Zinc diecast |
| Material (lens) | Polycarbonate |
| Material (mounting bracket) | Iron |
| Accessories | Instruction manual, Mounting bracket(with screws), Adjustment driver, Sensitivity adjuster |
As of July 8, 2008
Top of page
