Global
Close
Ratings / Performance
| Product classification | Solid State Relay for heater control |
|---|---|
| Input method | Voltage input |
| Rated input voltage | 12 to 24 VDC |
| Operating input voltage range | 9.6 to 30 VDC |
| Must-operating voltage | 9.6 VDC Max. |
| Reset voltage | 1 VDC Min. |
| Isolation | Phototriac |
| Input current | 7 mA Max. |
| Output Form | SPST-NO |
| Rated load voltage | 100 to 240 VAC (50/60Hz) |
| Operating voltage range | 75 to 264 VAC (50/60Hz) |
| Rated carry current | AC: 0.1 A to 20 A (at 40 CEL) |
| Inrush current resistance (peak value) | 220 A (at 60Hz/1cycle) |
| Output ON voltage drop | Main circuit : 1.6V (RMS) Max. Alarm output : 1.5V Max. |
| Leakage current | Main circuit : 10mA Max. (at 200VAC) Alarm output : 0.1mA Max. (at 24VDC) |
| Permissible I2t | 260 A2s |
| Applicable load | 4 kW (at 200VAC) |
| Conditions for SSR Failure Detection | SSR short-circuit: Operating input (betweenterminals A1 and A2) OFF SSR half-wave short-circuit: Operating input (betweenterminals A1 and A2) OFF SSR open-circuit: Operating input (betweenterminals A1 and A2) ON SSR half-wave open-circuit: Operating input (betweenterminals A1 and A2) ON |
| Conditions for SSR Failure Detection (Detection time) | 0.5 s Max. |
| Conditions for SSR Failure Detection (Alarm display) | RED |
| Alarm output | Output OFF collector voltage: 30 VDC Max. Maximum carry current: 0.1 A Output form: Independent NPN open collector |
| Detection Power Supply | Rated supply voltage: 100 to 240 VAC (50/60Hz) Operating voltage range: 75 to 264 VAC (50/60Hz) Current consumption: 15 mA Max. (at 200VAC) |
| Ambient temperature | Operating: -20 CEL to 60 CEL Storage: -30 CEL to 70 CEL (with no icing or condensation) |
| Ambient humidity | Operating: 45% RH to 85% RH (with no icing or condensation) |
| Operate time | 1/2 cycle of load power source + 1ms Max. |
|---|---|
| Release time | 1/2 cycle of load power source + 1ms Max. |
| Protection for output | Varisitor and Snubber |
| Zero cross function | Provided |
| Indicator | Input indicator(INPUT:Yellow:Operating) Operating indicator(RDY:Green:NormalALM:Red:Failure detection and circuit disconnection detection) |
| Insulation resistance | Between INPUT to LOAD: 100 M Ohm Min. (at 500 VDC) Between Heat Sink to INPUT/OUTPUT Terminals: 100 M Ohm Min. (at 500 VDC) |
| Dielectric strength | Between INPUT to LOAD: 2500 VAC 50/60 Hz for 1 min Between Heat Sink to INPUT/OUTPUT Terminals: 2500 VAC 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 to 10Hz 0.35mm single amplitude(0.7mm double amplitude)XYZ directions for 2hrs each |
| Shock resistance | 294m/s2 each XYZX'Y'Z' directions for 3 times |
| Applicable standard (UL) | Standard No.: UL508 File number: NO.E64562 |
| Applicable standard (CSA) | Standard No.: C22.2 NO.14 File number: No.LR35535 |
| Applicable standard (VDE) | Standard No.: EN60947-4-3 File number: NO.133114 |
| Terminal structure | screw |
| Terminal strength (Clamp torque) | Recomendable fasten torque M3.5: 0.75 to 1.18N.m Recomendable fasten torque M4: 0.98 to 1.47N.m |
| Mounting | panel(DIN track) |
| Weight | Approx. 300 g |
As of December 5, 2007
Top of page
