XE-Q22-2

Ratings
Shape / Structure	Enclosed Limit switches
service life	General type
Operating mechanism	Snap action
Actuator	Roller plunger
Frequency	50/60 Hz
Switching mechanism	Self-reset mechanism
Contact configuration	Single-Pole, Double-Throw type
Contact form	1c
Load	General load
Ratings (DC): Non-Inductive load	Rated voltage: 8 VDC, Resistive load: 10 A (NC) 10 A (NO), Lamp load: 3 A (NC) 1.5 A (NO) Rated voltage: 14 VDC, Resistive load: 10 A (NC) 10 A (NO), Lamp load: 3 A (NC) 1.5 A (NO) Rated voltage: 30 VDC, Resistive load: 10 A (NC) 10 A (NO), Lamp load: 3 A (NC) 1.5 A (NO) Rated voltage: 125 VDC, Resistive load: 10 A (NC) 10 A (NO), Lamp load: 3 A (NC) 1.5 A (NO) Rated voltage: 250 VDC, Resistive load: 3 A (NC) 3 A (NO), Lamp load: 1.5 A (NC) 0.75 A (NO)
Ratings (DC): Inductive load	Rated voltage: 8 VDC, Inductive load: 10 A (NC) 10 A (NO), Motor load: 5 A (NC) 2.5 A (NO) Rated voltage: 14 VDC, Inductive load: 10 A (NC) 10 A (NO), Motor load: 5 A (NC) 2.5 A (NO) Rated voltage: 30 VDC, Inductive load: 10 A (NC) 10 A (NO), Motor load: 5 A (NC) 2.5 A (NO) Rated voltage: 125 VDC, Inductive load: 7.5 A (NC) 6 A (NO), Motor load: 2 A (NC) 2.5 A (NO) Rated voltage: 250 VDC, Inductive load: 2 A (NC) 1.5 A (NO), Motor load: 2 A (NC) 1.5 A (NO)
Explanation	The above values indicate the steady-state current. Lamp load has an inrush current of 10 times the steady-state current. Inductive load has a time constant of 7 ms Max. (DC). Motor load has an inrush current of 6 times the steady-state current.
Inrush current	NC: 30 A NO: 15 A
Conduit size	G1/2
Earth terminal	Without ground terminal
Ambient temperature	Operating: -10 CEL to 80 CEL (with no icing or condensation)
Ambient humidity	Operating: 35%RH to 85%RH (with no icing or condensation)

Characteristics
Permissible operating speed	0.01 mm/s to 0.5 m/s
Permissible operating frequency (Mechanically)	120 operations / 1 minute Max.
Permissible operating frequency (Electrically)	20 operations / 1 minute Max.
Contact resistance	15 m Ohm Max. (Initial value) (Measuring method is contact resistance meter.)
Insulation resistance	Between each terminal of the same polarities: 100 M Ohm Min. Between live-metallic part and ground: 100 M Ohm Min. Between each terminal and non-live-metallic part: 100 M Ohm Min. (at 500 VDC Megger)
Dielectric strength	Between each terminal of the same polarities: 1,000 VAC Between live-metallic part and ground: 1,500 VAC Between each terminal and non-live-metallic part: 1,500 VAC (50/60 Hz for 1 min)
Durability (Mechanically)	1,000,000 operations Min. (No load) (Temperature, Humidityconditions: 5 CEL to 35 CEL, 40 %RH to 70 %RH)
Durability (Electrically)	100,000 operations Min. (Resistive load 10 A at 125 VDC) (Temperature, Humidityconditions: 5 CEL to 35 CEL, 40 %RH to 70 %RH)
Vibration resistance (Malfunction)	Vibration frequency range: 10 to 55 Hz, Double amplitude: 1.5 mm, Contact opening: 1 ms Max. at the free position and the total travel position.
Shock resistance (Destruction)	1,000 m/s2
Shock resistance (Malfunction)	Contact opening is 1 ms Max. at the free position and the total travel position at 50 m/s2.
Degree of protection	IEC60529 (JEM): IP65
Mounting specification	Side mounting

Operating characteristics
Operating Force (OF)	Standard value 5.0 N Max.
Release Force (RF)	Standard value 1.12 N Min.
Pre-Travel (PT)	Standard value 0.9 mm Max.
Over-Travel (OT)	Standard value 3.6 mm Min.
Movement Differential (MD)	Standard value 0.47 mm Max.
Operating Position (OP)	Standard value 49.7 +/- 1 mm

Ratings / Performance