Primary Contents

• Is there a Servo System that has full-closed control?
• What models of Servomotors with decelerators are used with SMARTSTEP A-series Servo Drivers?
• Is there a cable with attached connectors available for the R88D-U Servo Driver's analog monitor output?
• What are the differences between the R88M-U[][][]30H Servomotor and their replacements, the R88M-U[][][]30HA Servomotor?
• Can I use an external signal to release the brake of a U-series AC Servomotor equipped with a brake?
• Are there any Servomotors that have countermeasures against harmonics?
• What is the cause of the E23 error in an R88D-HT10 Servo Driver?
• When a 3F88L-132 Cam Positioner is replaced with a 3F88L-160 Cam Positioner, can the 3F88L-DP30 RPM Display Unit be used as-is?
• What shape of motor shaft should be selected if a Reduction Gear is installed on a SMARTSTEP A-series Servomotor?
• What should the command pulse setting be to make a SMARTSTEP A-series Servo Driver operate at 3000 r/min for the various resolutions?
• What kind of noise is generated when the Servo System is used? Also what kind of noise affects the operation of the Servo System?
• What concepts are applied for countermeasures for noise for a Servo System?
• What is the procedure for manually adjusting gain when using a Servomotor?