GlobalQuestion
I measured the output voltage with a tester and it is lower than the rated voltage. Can the output voltage be adjusted?
Answer
Although there are +/- output models that cannot be adjusted, the output from most Power Supplies can be adjusted by turning the voltage output adjuster (V.ADJ).
The voltage will increase when the adjuster is turned clockwise.
The voltage will decrease when the adjuster is turned counterclockwise.
The ranges in which the voltage can be adjusted are as follows:
Voltage Adjustment Ranges (Typical Examples)
| Power Supplies | Voltage adjustment range |
| S82J Series | ±10% |
| S82K Series (except S82K-03012/-03024/-05024) | ±10% |
| S82K-03012/-03024/-05024 | -10% to +15% |
Recommended Products
S8VS
Multi-Function Indication Monitor for Production Site Visualization * (* Models with indication monitor)
ZJ-FA20
High-speed, High cost performance Ionization
S8JX
Flexible Selection of Reliability and Ease of Operation with the S8JX. New Models with Harmonic Current Suppression for a Broader Lineup.
Other Power Supplies FAQ
-
What factors should be considered when selecting Power Supplies?
-
The output indicator turns ON, but then turns OFF immediately. What is the cause of the problem and solution (in models equipped with the overvoltage protection function)?
-
The output voltage decreased while Power Supplies are in use. What is the cause of the problem and solution?
FAQ
Top of page