Page top

Industrial Automation

Global

Global Navigation

Lead Contents

FAQ02599 of Programmable Controllers FAQ

FAQ No. FAQ02599

Related Contents

Primary Contents

Question

How can I connect a C200H Programmable Controller's CPU Unit with an IBM PC/AT or compatible computer?

Answer



1.Mount the C200H-IP007 Peripheral Interface Unit to the C200H and connect the CQM1-CIF02 Connecting Cables.

2.Mount the C120-LK201-V1 Host Link Unit to the C200H and connect the XW2Z-200P-V Connecting Cables.

The C200H CPU Unit and the computer cannot be connected using only a cable. An interface is always necessary. In either case, the Host Link communications mode is used.

Recommended Products

CJ2

Introducing the Flagship CJ2 CPU Units, with Built-in Multifunctional Ethernet Port.

CP1E

Cost-effective CP1E with Enhanced Expandability for Analog and Temperature Control

NJ

Motion, Logic, Safety, Vision and HMI in one

Other Programmable Controllers FAQ

Local Navigation

FAQ

Site Information

© Copyright OMRON Corporation 2007 - 2024. All Rights Reserved.