Photoelectric Sensor with Separate Digital Amplifier (Laser-type)
Image
Connection method |
Wire-saving connector models |
---|
As of August 25, 2020
Separate Amplifier classification | Amplifier Unit |
---|---|
Power supply voltage | 12 to 24 VDC±10% ripple (p-p) 10% max. |
Current consumption | 45 mA max. |
Power consumption | 1080 mW max. (20 VDC) |
Control output | NPN open collector 26.4 VDC max. 50 mA max. Residual voltage: 1 V max. |
Operation mode | Light-ON/Dark-ON selectable |
Protective circuit | Mutual interference prevention |
Response time | Super-high-speed mode: 100 µs max. High-speed mode: 250 µs max. Standard mode: 1 ms max. High-resolution mode: 4 ms max. |
Self-diagnostic output | Equipped |
Timer function | Select from ON-delay, OFF-delay, or one-shot timer 1 ms to 5 s |
Ambient temperature range (Operating) | Groups of 1 to 2 units: -25 to 55 ℃ Groups of 3 to 10 units: -25 to 50 ℃ Groups of 11 to 16 units: -25 to 45 ℃ (with no icing) |
Ambient temperature range (Storage) | -30 to 70 ℃ (with no icing) |
Ambient humidity range (Operating) | 35 to 85% (with no condensation) |
Ambient humidity range (Strage) | 35 to 85% (with no condensation) |
Insulation resistance | 20 MΩ (500 VDC megger) |
Dielectric strength | 1000 VAC 50/60 Hz 1 min |
Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h |
Shock resistance | Destruction: 500 m/s2 3 times each in X, Y and Z directions |
Degree of protection | IEC: IP50 |
Connection method | Wire-saving connector models |
Indicator | Operation indicator (orange), Digital display |
Weight | Package: Approx. 55 g |
Material | Case: Polybutylene terephthalate (PBT) Cover: Polycarbonate |
Amplifier unit/senso head of combination | E3C-LD11 2M, E3C-LD21 2M, E3C-LD31 2M, E3C-LR11 2M, E3C-LR12 2M |
As of August 25, 2020
As of August 25, 2020
As of August 25, 2020
As of August 25, 2020
As of August 25, 2020