E3C-LDA6AT

Photoelectric Sensor with Separate Digital Amplifier (Laser-type)

Image

Amplifier Unit, Light-ON/Dark-ON selectable, NPN output, Wire-saving connector models, Timer function, ATC function

Connection method Wire-saving connector models

Item list of E3C-LDA

  • Ratings/Performance
Separate Amplifier classificationAmplifier Unit
Power supply voltage12 to 24 VDC ±10% ripple (p-p) 10% max.
Current consumption45 mA max.
Power consumption1080 mW max. (at 24 VDC)
Control outputNPN open collector
26.4 VDC max.
50 mA max.
Residual voltage: 1 V max.
Operation modeLight-ON/Dark-ON selectable
Protective circuitMutual interference prevention (disabled at super-high-speed mode)
Response timeSuper-high-speed mode: 100 µs max.
High-speed mode: 250 µs max.
Standard mode: 1 ms max.
High-resolution mode: 4 ms max.
Self-diagnostic outputSupported
Timer functionSelect from ON-delay, OFF-delay, or One-shot delay
1 ms to 5 s
Ambient temperature (Operating)Groups of 1 to 2 Sensors: -25 to 55℃
Groups of 3 to 10 Sensors: -25 to 50℃
Groups of 11 to 16 Sensors: -25 to 45℃
Ambient temperature (Storage)-30 to 70℃
Ambient humidityOperating: 35 to 85%
Storage: 35 to 85%
Insulation resistance20 MΩ min. (at 500 VDC)
Dielectric strength1000 VAC 50/60 Hz 1 min
Vibration resistanceDestruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistanceDestruction: 500 m/s**2 3 times each in X, Y and Z directions
Degree of protectionIEC: IP50
Connection methodWire-saving connector models
IndicatorOperation indicator (orange), Digital display
WeightPackage: Approx. 55 g
MaterialCase: Polybutylene terephthalate (PBT)
Cover: Polycarbonate
Amplifier unit/senso head of combinationE3C-LD11 2M, E3C-LD21 2M, E3C-LD31 2M, E3C-LR11 2M, E3C-LR12 2M
  • Output circuit diagram

Series

Photoelectric Sensor with Separate Digital Amplifier (Laser-type)

E3C-LDA

about this Product