G3NA-D210B AC100-240

Solid State Relays


Transistor output (Heater control), Input: 100 to 240 VAC, Output: 10A 5 to 200 VDC, SPST-NO, with Indicator, Screw terminal

Product classification Solid State Relay for heater control
Operating rated voltage 100 to 240 VAC
Load voltage range 4 to 220 VDC
Load current 0.1 A to 10 A With heat sink at 40 ℃
0.1 A to 4 A Without a heat sink at 40 ℃
Indicator Equipped
Terminal structure Screw terminal

Item list of G3NA

  • Ratings / Performance
Product classificationSolid State Relay for heater control
Operating rated voltage100 to 240 VAC
Operating voltage range75 to 264 VAC
Input impedance72 kΩ±20%
Must operate voltage75 VAC max.
Must release voltage20 VAC min.
Isolation methodPhotocoupler
Rated load voltage5 to 200 VDC
Load voltage range4 to 220 VDC
Load current0.1 A to 10 A With heat sink at 40 ℃
0.1 A to 4 A Without a heat sink at 40 ℃
Inrush current resistivity20 A (10 ms)
20 A (10 ms)
Output ON voltage drop1.5 V
Leakage current5 mA (at 200 VDC)
Ambient temperatureOperating: -30 to 80 ℃
Storage: -30 to 100 ℃
(with no icing or condensation)
Ambient humidityOperating: 45 to 85%RH
(with no icing or condensation)
Operate time30 ms max.
Release time30 ms max.
Insulation resistance100 MΩ (at 500 VDC)
Dielectric strength2500 V 50/60 Hz 1 min
Vibration resistance10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance1,000 m/s**2
Terminal structureScrew terminal
MountingScrew mounting
WeightApprox. 70 g
  • Dimensions

Mounting holes

  • Connection diagram

Terminal arrangement and internal connection

  • Characteristic figure

Load current-ambient temperature

Inrush current resistivity (Non-repetitive) (The dotted line is a repetition. Keep the inrush current below the values shown by the dotted line if it occurs repetitively.)


Solid State Relays


about this Product