CX-One Ver.4 Update Information

CX-One Ver.4 Each software

• Common Components
• CX-Programmer
• SwitchBoxUtility
• CX-Integrator
• CX-Protocol
• CX-Simulator
• CX-Position
• CX-Motion-NCF
• CX-Motion-MCH
• CX-Motion
• CX-Drive
• CX-Process Tool
• CX-Designer
• NV-Designer
• CX-Thermo
• NX-IO Configurator
• CX-FLnet
• Network Configurator
• Communications Middleware
• CX-ConfiguratorFDT
• Compo Net DTM
• SmartSlice I/O Coupler DTM

Change history of Common Module

－ : CX-One Version 4 Auto-update (January 2025)

Improved functions

<PLC Settings>

• Solved the problem in which the PLC system setting was configured to default when the PLC model was CPM2* or CPM2*-S* and the PLC system setting was started from CX-Programmer.

－ : CX-One Version 4 Auto-update (October 2024)

New functions

<Related to IO-Link>

• Supported the installation of the following IO-Link device IODD files.
  Amplifier built-in TOF Laser Sensor with Built-in Amplifier: E3AS-HF6000DMT, E3AS-HF6000SMT

<CPS>

• Added the following files:
  CPS_NJ101-1000_Ver1_67.xml
  CPS_NJ101-1020_Ver1_67.xml
  CPS_NJ101-9000_Ver1_67.xml
  CPS_NJ101-9020_Ver1_67.xml
  CPS_NJ301-1100_Ver1_67.xml
  CPS_NJ301-1200_Ver1_67.xml
  CPS_NJ501-1300_Ver1_67.xml
  CPS_NJ501-1320_Ver1_67.xml
  CPS_NJ501-1340_Ver1_67.xml
  CPS_NJ501-1400_Ver1_67.xml
  CPS_NJ501-1420_Ver1_67.xml
  CPS_NJ501-1500_Ver1_67.xml
  CPS_NJ501-1520_Ver1_67.xml
  CPS_NJ501-4300_Ver1_67.xml
  CPS_NJ501-4310_Ver1_67.xml
  CPS_NJ501-4320_Ver1_67.xml
  CPS_NJ501-4400_Ver1_67.xml
  CPS_NJ501-4500_Ver1_67.xml
  CPS_NJ501-5300_Ver1_67.xml
  CPS_NJ501-R300_Ver1_67.xml
  CPS_NJ501-R320_Ver1_67.xml
  CPS_NJ501-R400_Ver1_67.xml
  CPS_NJ501-R420_Ver1_67.xml
  CPS_NJ501-R500_Ver1_67.xml
  CPS_NJ501-R520_Ver1_67.xml

Improved functions

<I/O Table>

• Loading the parameter files for the following unit is now available, When 'Load Parameters' is selected for CJ1W-EIP21S.
  CJ1W-EIP21, CJ1W-ETN21
• Loading the parameter files for the following unit is now available, When 'Load Parameters' is selected for CJ1W-EIP21S.
  CS1W-EIP21, CS1W-ETN21, CS1D-ETN21D

<PLC Backup Tool>

• Solved the problem that detailed comparison could not be executed for programs when the programs of the CPU Units were compared and did not match.

<USB conversion cable driver software>

• Updated the Windows 11 USB driver software for G5 and MX2/RX2 series.

－ : CX-One Version 4 Auto-update (July 2024)

Improved functions

<CX-Server>

• Solved the problem that a Toolbus connection to a CS/CJ series PLC with the Baud rate Auto-Detect option enabled is not available in some Windows 10 and 11 environments.

－ : CX-One Version 4 Auto-update (April 2024)

New functions

• Added EDS files for the following NX502 series Controllers.
  NX502-1600, NX502-1700

Improved functions

• Solved the problem that could cause the application to abend while loading a project file or opening an I/O table component with CX-Programmer or other applications.
• Solved the problem that could cause the application to abend while opening the PLC System Settings component.

<CPS>

• Updated the following files:
  CPS_CS1W-SCU31-V1_Ver1_3.xml
  CPS_CJ1W-SCU31-V1_Ver1_3.xml

<Cmn2404_0403Setup.exe>

• Changed the version of .NET Framework to install, from 4.6.2 to 4.8.

－ : CX-One Version 4 Auto-update (January 2024)

New functions

<CPS>

• Added the following files:
  CPS_RCJ1W-DRM21_Ver1_1.xml

－ : CX-One Version 4 Auto-update (October 2023)

New functions

<CPS>

• Added the following files:
  CPS_NJ101-1000_Ver1_64.xml
  CPS_NJ101-1020_Ver1_64.xml
  CPS_NJ101-9000_Ver1_64.xml
  CPS_NJ101-9020_Ver1_64.xml
  CPS_NJ301-1100_Ver1_64.xml
  CPS_NJ301-1200_Ver1_64.xml
  CPS_NJ501-1300_Ver1_64.xml
  CPS_NJ501-1320_Ver1_64.xml
  CPS_NJ501-1340_Ver1_64.xml
  CPS_NJ501-1400_Ver1_64.xml
  CPS_NJ501-1420_Ver1_64.xml
  CPS_NJ501-1500_Ver1_64.xml
  CPS_NJ501-1520_Ver1_64.xml
  CPS_NJ501-4300_Ver1_64.xml
  CPS_NJ501-4310_Ver1_64.xml
  CPS_NJ501-4320_Ver1_64.xml
  CPS_NJ501-4400_Ver1_64.xml
  CPS_NJ501-4500_Ver1_64.xml
  CPS_NJ501-5300_Ver1_64.xml
  CPS_NJ501-R300_Ver1_64.xml
  CPS_NJ501-R320_Ver1_64.xml
  CPS_NJ501-R400_Ver1_64.xml
  CPS_NJ501-R420_Ver1_64.xml
  CPS_NJ501-R500_Ver1_64.xml
  CPS_NJ501-R520_Ver1_64.xml

Improved functions

<CX-Server>

• Solved the problem that CX-Server might terminate abnormally if a file was opened in some CX-One applications.

－ ：CX-One Version 4 Auto-update (July 2023)

Improved functions

<EIP21S User Management Tool>

• Solved the problem that this application might not be available on a computer where Sysmac Studio has been installed.

－ ：CX-One Version 4 Auto-update (July 2023)

New functions

• Support the secure communications via CS1W-EIP21S and CJ1W-EIP21S units.
  
  <CPS>
• Added the following files:
  CPS_CJ2H-CPU64_Ver1_6.xml
  CPS_CJ2H-CPU65_Ver1_6.xml
  CPS_CJ2H-CPU66_Ver1_6.xml
  CPS_CJ2H-CPU67_Ver1_6.xml
  CPS_CJ2H-CPU68_Ver1_6.xml
  CPS_CJ2H-CPU64-EIP_Ver1_6.xml
  CPS_CJ2H-CPU65-EIP_Ver1_6.xml
  CPS_CJ2H-CPU66-EIP_Ver1_6.xml
  CPS_CJ2H-CPU67-EIP_Ver1_6.xml
  CPS_CJ2H-CPU68-EIP_Ver1_6.xml
  CPS_CJ2M-CPU11_Ver2_2.xml
  CPS_CJ2M-CPU12_Ver2_2.xml
  CPS_CJ2M-CPU13_Ver2_2.xml
  CPS_CJ2M-CPU14_Ver2_2.xml
  CPS_CJ2M-CPU15_Ver2_2.xml
  CPS_CJ2M-CPU31_Ver2_2.xml
  CPS_CJ2M-CPU32_Ver2_2.xml
  CPS_CJ2M-CPU33_Ver2_2.xml
  CPS_CJ2M-CPU34_Ver2_2.xml
  CPS_CJ2M-CPU35_Ver2_2.xml
  CPS_CJ1W-EIP21S_Ver1_0.xml
  CPS_CS1W-EIP21S_Ver1_0.xml
  
  <EIP21S User Management Tool>
• Managing user information and operation log in CS/CJ Units supporting secure communications is possible.

－ ：CX-One Version 4 Auto-update (April 2023)

New functions

• Added EDS files for the following NX502 series Controllers.
  NX502-1300, NX502-1400, NX502-1500

Improved functions

<CX-One Information>

• Improved the display of the PC category for Windows 10 and 11.
  
  <Cmn2304_0403Setup.exe>
• Changed the .NET Framework version to be installed from 4.6.1 to 4.6.2.

－ ：CX-One Version 4 Auto-update (January 2023)

New functions

[CPS]

• Added the following files:
  CPS_NJ101-1000_Ver1_60.xml
  CPS_NJ101-1020_Ver1_60.xml
  CPS_NJ101-9000_Ver1_60.xml
  CPS_NJ101-9020_Ver1_60.xml
  CPS_NJ301-1100_Ver1_60.xml
  CPS_NJ301-1200_Ver1_60.xml
  CPS_NJ501-1300_Ver1_60.xml
  CPS_NJ501-1320_Ver1_60.xml
  CPS_NJ501-1340_Ver1_60.xml
  CPS_NJ501-1400_Ver1_60.xml
  CPS_NJ501-1420_Ver1_60.xml
  CPS_NJ501-1500_Ver1_60.xml
  CPS_NJ501-1520_Ver1_60.xml
  CPS_NJ501-4300_Ver1_60.xml
  CPS_NJ501-4310_Ver1_60.xml
  CPS_NJ501-4320_Ver1_60.xml
  CPS_NJ501-4400_Ver1_60.xml
  CPS_NJ501-4500_Ver1_60.xml
  CPS_NJ501-5300_Ver1_60.xml
  CPS_NJ501-R300_Ver1_60.xml
  CPS_NJ501-R320_Ver1_60.xml
  CPS_NJ501-R400_Ver1_60.xml
  CPS_NJ501-R420_Ver1_60.xml
  CPS_NJ501-R500_Ver1_60.xml
  CPS_NJ501-R520_Ver1_60.xml

Improved functions

<USB conversion cable driver software>

• Updated the USB-serial conversion cable driver software for 3G3AX.
• Updated the USB-serial conversion cable driver software for 3G3MX2/3G3RX2.
• Updated the USB-serial conversion cable driver software for G5-series.

－ ：CX-One Version 4 Auto-update (October 2022)

New functions

[CPS]

• Added the following files:
  CPS_NJ101-1000_Ver1_50.xml
  CPS_NJ101-1020_Ver1_50.xml
  CPS_NJ101-9000_Ver1_50.xml
  CPS_NJ101-9020_Ver1_50.xml
  CPS_NJ301-1100_Ver1_50.xml
  CPS_NJ301-1200_Ver1_50.xml
  CPS_NJ501-1300_Ver1_50.xml
  CPS_NJ501-1320_Ver1_50.xml
  CPS_NJ501-1340_Ver1_50.xml
  CPS_NJ501-1400_Ver1_50.xml
  CPS_NJ501-1420_Ver1_50.xml
  CPS_NJ501-1500_Ver1_50.xml
  CPS_NJ501-1520_Ver1_50.xml
  CPS_NJ501-4300_Ver1_50.xml
  CPS_NJ501-4310_Ver1_50.xml
  CPS_NJ501-4320_Ver1_50.xml
  CPS_NJ501-4400_Ver1_50.xml
  CPS_NJ501-4500_Ver1_50.xml
  CPS_NJ501-5300_Ver1_50.xml
  CPS_NJ501-R300_Ver1_50.xml
  CPS_NJ501-R320_Ver1_50.xml
  CPS_NJ501-R400_Ver1_50.xml
  CPS_NJ501-R420_Ver1_50.xml
  CPS_NJ501-R500_Ver1_50.xml
  CPS_NJ501-R520_Ver1_50.xml
  
  <IO-Link>
• Added the following Flow Sensors:
  E8FC-25SD
  E8FC-25ST
• Added the following Pressure Sensors:
  E8PC-010SD
  E8PC-010ST
  E8PC-100SD
  E8PC-100ST
  E8PC-400SD
  E8PC-400ST
  E8PC-010SD-E
  E8PC-010ST-E
  E8PC-100SD-E
  E8PC-100ST-E
  E8PC-400SD-E
  E8PC-400ST-E

－ ：CX-One Version 4 Auto-update (July 2022)

New functions

[CPS]

• Added the following files:
  CPS_NJ101-1000_Ver1_49.xml
  CPS_NJ101-1020_Ver1_49.xml
  CPS_NJ101-9000_Ver1_49.xml
  CPS_NJ101-9020_Ver1_49.xml
  CPS_NJ301-1100_Ver1_49.xml
  CPS_NJ301-1200_Ver1_49.xml
  CPS_NJ501-1300_Ver1_49.xml
  CPS_NJ501-1320_Ver1_49.xml
  CPS_NJ501-1340_Ver1_49.xml
  CPS_NJ501-1400_Ver1_49.xml
  CPS_NJ501-1420_Ver1_49.xml
  CPS_NJ501-1500_Ver1_49.xml
  CPS_NJ501-1520_Ver1_49.xml
  CPS_NJ501-4300_Ver1_49.xml
  CPS_NJ501-4310_Ver1_49.xml
  CPS_NJ501-4320_Ver1_49.xml
  CPS_NJ501-4400_Ver1_49.xml
  CPS_NJ501-4500_Ver1_49.xml
  CPS_NJ501-5300_Ver1_49.xml
  CPS_NJ501-R300_Ver1_48.xml
  CPS_NJ501-R300_Ver1_49.xml
  CPS_NJ501-R320_Ver1_48.xml
  CPS_NJ501-R320_Ver1_49.xml
  CPS_NJ501-R400_Ver1_48.xml
  CPS_NJ501-R400_Ver1_49.xml
  CPS_NJ501-R420_Ver1_48.xml
  CPS_NJ501-R420_Ver1_49.xml
  CPS_NJ501-R500_Ver1_48.xml
  CPS_NJ501-R500_Ver1_49.xml
  CPS_NJ501-R520_Ver1_48.xml
  CPS_NJ501-R520_Ver1_49.xml

Improved functions

[PLC Error Log]

• Solved the problem that 00:00:00 was displayed blank on the error history list in some PC environments.

－ ：CX-One Version 4 Auto-update (April 2022)

New functions

<CPS>

• Added the following files:
  CPS_NJ101-1020_Ver1_47.xml
  CPS_NJ101-9020_Ver1_47.xml
  CPS_NJ501-1300_Ver1_48.xml
  CPS_NJ501-1400_Ver1_48.xml
  CPS_NJ501-1500_Ver1_48.xml
  CPS_NJ501-1320_Ver1_47.xml
  CPS_NJ501-1420_Ver1_47.xml
  CPS_NJ501-1520_Ver1_47.xml
  CPS_NJ501-1340_Ver1_47.xml
  CPS_NJ501-4300_Ver1_47.xml
  CPS_NJ501-4310_Ver1_47.xml
  CPS_NJ501-4320_Ver1_47.xml
  CPS_NJ501-4400_Ver1_47.xml
  CPS_NJ501-4500_Ver1_47.xml
  CPS_NJ501-5300_Ver1_47.xml

Improved functions

• Solved the problem that the USB driver for CS1W-CIF31 might not be installed or run correctly on some Windows 10 computers.

－ ：CX-One Version 4 Auto-update (January 2022)

Improved functions

• Solved the problem that the PLC/NS USB driver might not be installed normally or not work on some Windows 10 computers.

[Position Control Unit (CJ1W-NC[]81/[]82) setting component]

• Solved the problem that EtherCAT communication cannot be established when slave is the inverter 3G3RX2 series.

－ ：CX-One Version 4 Auto-update (October 2021)

New functions

<CPS>

• Added the following files:
  - CPS_NJ101-1000_Ver1_47.xml
  - CPS_NJ101-1020_Ver1_27.xml
  - CPS_NJ101-9000_Ver1_47.xml
  - CPS_NJ101-9020_Ver1_27.xml
  - CPS_NJ301-1100_Ver1_47.xml
  - CPS_NJ301-1200_Ver1_47.xml
  - CPS_NJ501-1300_Ver1_47.xml
  - CPS_NJ501-1320_Ver1_27.xml
  - CPS_NJ501-1340_Ver1_27.xml
  - CPS_NJ501-1400_Ver1_47.xml
  - CPS_NJ501-1420_Ver1_27.xml
  - CPS_NJ501-1500_Ver1_47.xml
  - CPS_NJ501-1520_Ver1_27.xml
  - CPS_NJ501-4300_Ver1_27.xml
  - CPS_NJ501-4310_Ver1_27.xml
  - CPS_NJ501-4320_Ver1_27.xml
  - CPS_NJ501-4400_Ver1_27.xml
  - CPS_NJ501-4500_Ver1_27.xml
  - CPS_NJ501-5300_Ver1_27.xml
  - CPS_NJ501-R300_Ver1_47.xml
  - CPS_NJ501-R320_Ver1_47.xml
  - CPS_NJ501-R400_Ver1_47.xml
  - CPS_NJ501-R420_Ver1_47.xml
  - CPS_NJ501-R500_Ver1_47.xml
  - CPS_NJ501-R520_Ver1_47.xml

Improved functions

<CX-Server>

• Solved the problem that CX-Server might terminate abnormally if a file was opened in some CX-One applications.

－ ：CX-One Version 4 Auto-update (July 2021)

New functions

<CPS>

• Added the following files:
  - CPS_NJ101-1000_Ver1_46.xml
  - CPS_NJ101-1020_Ver1_26.xml
  - CPS_NJ101-9000_Ver1_46.xml
  - CPS_NJ101-9020_Ver1_26.xml
  - CPS_NJ301-1100_Ver1_46.xml
  - CPS_NJ301-1200_Ver1_46.xml
  - CPS_NJ501-1300_Ver1_46.xml
  - CPS_NJ501-1320_Ver1_26.xml
  - CPS_NJ501-1340_Ver1_26.xml
  - CPS_NJ501-1400_Ver1_46.xml
  - CPS_NJ501-1420_Ver1_26.xml
  - CPS_NJ501-1500_Ver1_46.xml
  - CPS_NJ501-1520_Ver1_26.xml
  - CPS_NJ501-4300_Ver1_26.xml
  - CPS_NJ501-4310_Ver1_26.xml
  - CPS_NJ501-4320_Ver1_26.xml
  - CPS_NJ501-4400_Ver1_26.xml
  - CPS_NJ501-4500_Ver1_26.xml
  - CPS_NJ501-5300_Ver1_26.xml
  - CPS_NJ501-R300_Ver1_46.xml
  - CPS_NJ501-R320_Ver1_46.xml
  - CPS_NJ501-R400_Ver1_46.xml
  - CPS_NJ501-R420_Ver1_46.xml
  - CPS_NJ501-R500_Ver1_46.xml
  - CPS_NJ501-R520_Ver1_46.xml

－ ：CX-One Version 4 Auto-update (April 2021)

New functions

<CPS>

• Added the following files:
  CPS_NJ501-R300_Ver1_44.xml
  CPS_NJ501-R320_Ver1_44.xml
  CPS_NJ501-R400_Ver1_44.xml
  CPS_NJ501-R420_Ver1_44.xml
  CPS_NJ501-R500_Ver1_44.xml
  CPS_NJ501-R520_Ver1_44.xml

Improved functions

<CX-Server>

• Solved the problem that CX-Server might terminate abnormally if a file was opened in some CX-One applications.

－ ：CX-One Version 4 Auto-update (January 2021)

New functions

<CPS>

• Added the following files:
  - CPS_NJ501-1300_Ver1_43.xml
  - CPS_NJ501-1400_Ver1_43.xml
  - CPS_NJ501-1500_Ver1_43.xml
  - CPS_NJ501-R300_Ver1_43.xml
  - CPS_NJ501-R320_Ver1_43.xml
  - CPS_NJ501-R400_Ver1_43.xml
  - CPS_NJ501-R420_Ver1_43.xml
  - CPS_NJ501-R500_Ver1_43.xml
  - CPS_NJ501-R520_Ver1_43.xml
  
  <CX-Server>
• Support NJ series Robot Integrated CPU Unit NJ501-R[]20.

Improved functions

• Solved the problem that CX-Integrator could not be connected to the NJ series Robot Integrated CPU Unit NJ501-R[][][].
  
  <CX-Server>
• Solved the problem that CX-Server might terminate abnormally if a file was opened in some CX-One applications.
  
  <CPS>
• Updated the following files:
  - CPS_NJ501-R300_Ver1_41.xml
  - CPS_NJ501-R400_Ver1_41.xml
  - CPS_NJ501-R500_Ver1_41.xml

－ ：CX-One Version 4 Auto-update (October 2020)

New functions

<CPS>

• Added the following files:
  - CPS_NJ101-1000_Ver1_42.xml
  - CPS_NJ101-9000_Ver1_42.xml
  - CPS_NJ301-1100_Ver1_42.xml
  - CPS_NJ301-1200_Ver1_42.xml
  - CPS_NJ501-1300_Ver1_42.xml
  - CPS_NJ501-1400_Ver1_42.xml
  - CPS_NJ501-1500_Ver1_42.xml
  
  <IO-Link>
• Support the following CMOS Laser Sensors:
  - E3AS-HL150 series
  - E3AS-HL500 series
  
  <Position Control Unit (Model: CJ1W-NC[]81/[]82) setting component>
• Support 1S series Servo Drivers version 1.4.

－ ：CX-One Version 4 Auto-update (August 2020)

New functions

<CPS>

• Added the following files:
  - CPS_NJ501-R300_Ver1_41.xml
  - CPS_NJ501-R400_Ver1_41.xml
  - CPS_NJ501-R500_Ver1_41.xml
  
  <CX-Server>
• Support NJ-series Robot Integrated CPU Unit NJ501-R[]00.

－ ：CX-One Version 4 Auto-update (July 2020)

New functions

<CPS>

• Added the following files:
  - CPS_NJ101-1020_Ver1_23.xml
  - CPS_NJ101-9020_Ver1_23.xml
  - CPS_NJ501-1320_Ver1_23.xml
  - CPS_NJ501-1420_Ver1_23.xml
  - CPS_NJ501-1520_Ver1_23.xml
  - CPS_NJ501-4320_Ver1_23.xml

Improved functions

<IO-Link>

• Updated the IODD file for Intelligent Tap (Accessory for F3SG-SR/PG series: Safety light curtain)

－ ：CX-One Version 4 Auto-update (Apr 2020)

New functions

<CPS>

• Added the following files:
  CPS_NJ101-1000_Ver1_41.xml
  CPS_NJ101-9000_Ver1_41.xml
  CPS_NJ301-1100_Ver1_41.xml
  CPS_NJ301-1200_Ver1_41.xml
  CPS_NJ501-1300_Ver1_41.xml
  CPS_NJ501-1400_Ver1_41.xml
  CPS_NJ501-1500_Ver1_41.xml
  
  <Related to IO-Link>
  Enable to install the IODD files for the IO-Link devices listed below:
• NXR-series IO-Link Digital Input Hub Unit (NXR-ID166C-IL2)
• NXR-series IO-Link Digital Input/Output Hub Unit (NXR-CD166C-IL2)

－ ：CX-One Version 4 Auto-update (January 2020)

New functions

<Related to IO-Link>

Enable install the IODD files of the following IO-Link devices.

• TOF Laser Sensor (E3AS- F1000I[][]/1500I[][]-series)
• Distance-settable Photoelectric Sensor (E3AS-L80M[][]/200M[][]-series)

Improved functions

<Related to IO-Link>

Updated the IODD file for E2E-NEXT-series (IO-Link embedded) Proximity Sensors.

－ ：CX-One Version 4 Auto-update (October 2019)

Improved functions

• Updated the configuration module for Sysmac Studio.

－ ：CX-One Version 4 Auto-update (September 2019)

New functions

• Support the following PLCs.
    CP2E-E[][]DR-A
    CP2E-S[][]D[]-[]
    CP2E-N[][]D[]-[]
  
  <CPS>
• Added the following files.
  CPS_CP2E-E14DR-A_Ver1_0.xml
  CPS_CP2E-E20DR-A_Ver1_0.xml
  CPS_CP2E-E30DR-A_Ver1_0.xml
  CPS_CP2E-E40DR-A_Ver1_0.xml
  CPS_CP2E-E60DR-A_Ver1_0.xml
  CPS_CP2E-N14DR-A_Ver1_0.xml
  CPS_CP2E-N14DR-D_Ver1_0.xml
  CPS_CP2E-N14DT1-D_Ver1_0.xml
  CPS_CP2E-N14DT-A_Ver1_0.xml
  CPS_CP2E-N14DT-D_Ver1_0.xml
  CPS_CP2E-N20DR-A_Ver1_0.xml
  CPS_CP2E-N20DR-D_Ver1_0.xml
  CPS_CP2E-N20DT1-D_Ver1_0.xml
  CPS_CP2E-N20DT-A_Ver1_0.xml
  CPS_CP2E-N20DT-D_Ver1_0.xml
  CPS_CP2E-N30DR-A_Ver1_0.xml
  CPS_CP2E-N30DR-D_Ver1_0.xml
  CPS_CP2E-N30DT1-D_Ver1_0.xml
  CPS_CP2E-N30DT-A_Ver1_0.xml
  CPS_CP2E-N30DT-D_Ver1_0.xml
  CPS_CP2E-N40DR-A_Ver1_0.xml
  CPS_CP2E-N40DR-D_Ver1_0.xml
  CPS_CP2E-N40DT1-D_Ver1_0.xml
  CPS_CP2E-N40DT-A_Ver1_0.xml
  CPS_CP2E-N40DT-D_Ver1_0.xml
  CPS_CP2E-N60DR-A_Ver1_0.xml
  CPS_CP2E-N60DR-D_Ver1_0.xml
  CPS_CP2E-N60DT1-D_Ver1_0.xml
  CPS_CP2E-N60DT-A_Ver1_0.xml
  CPS_CP2E-N60DT-D_Ver1_0.xml
  CPS_CP2E-S30DR-A_Ver1_0.xml
  CPS_CP2E-S30DT1-D_Ver1_0.xml
  CPS_CP2E-S30DT-D_Ver1_0.xml
  CPS_CP2E-S40DR-A_Ver1_0.xml
  CPS_CP2E-S40DT1-D_Ver1_0.xml
  CPS_CP2E-S40DT-D_Ver1_0.xml
  CPS_CP2E-S60DR-A_Ver1_0.xml
  CPS_CP2E-S60DT1-D_Ver1_0.xml
  CPS_CP2E-S60DT-D_Ver1_0.xml
  CPS_CP2E-ETN21_Ver0_0.xml
  CPS_CP2E-ETN21_Ver1_0.xml

－ ：CX-One Version 4 Auto-update (July 2019)

New functions

• Added the following files.
  CPS_NJ101-1000_Ver1_40.xml
  CPS_NJ101-9000_Ver1_40.xml
  CPS_NJ301-1100_Ver1_40.xml
  CPS_NJ301-1200_Ver1_40.xml
  CPS_NJ501-1300_Ver1_40.xml
  CPS_NJ501-1400_Ver1_40.xml
  CPS_NJ501-1500_Ver1_40.xml
  CPS_NJ501-1340_Ver1_21.xml
  CPS_NJ501-4300_Ver1_21.xml
  CPS_NJ501-4310_Ver1_21.xml
  CPS_NJ501-4400_Ver1_21.xml
  CPS_NJ501-4500_Ver1_21.xml
  CPS_NJ501-5300_Ver1_21.xml
  
  <Related to IO-Link>
  1) Enable install IODD files (standard profile of IO-Link device) of Omron’s IO-Link devices.
  2) Enable install IODD files of the following IO-Link devices.
• Intelligent tap (accessory for F3SG-SR/PG series Safety Light Curtain)
• Proximity sensors (E2EW series)
  

－ ：CX-One Version 4 Auto-update (May 2019)

New functions

<CPS>

• Added the following files.
  CPS_NJ101-1000_Ver1_21.xml
  CPS_NJ101-9000_Ver1_21.xml
  CPS_NJ301-1100_Ver1_21.xml
  CPS_NJ301-1200_Ver1_21.xml
  CPS_NJ501-1300_Ver1_21.xml
  CPS_NJ501-1400_Ver1_21.xml
  CPS_NJ501-1500_Ver1_21.xml

－ ：CX-One Version 4 Auto-update (April 2019)

Improved functions

<I/O Table>

• Improved to prevent memory leak when the I/O table component terminates.
  

－ ：CX-One Version 4 Auto-update (January 2019)

New functions

• Added the following files.
  CPS_NJ101_1000_Ver.1.20.xml
  CPS_NJ101_1020_Ver.1.20.xml
  CPS_NJ101_9000_Ver.1.20.xml
  CPS_NJ101_9020_Ver.1.20.xml
  CPS_NJ301_1100_Ver.1.20.xml
  CPS_NJ301_1200_Ver.1.20.xml
  CPS_NJ501_1300_Ver.1.20.xml
  CPS_NJ501_1320_Ver.1.20.xml
  CPS_NJ501_1340_Ver.1.20.xml
  CPS_NJ501_1400_Ver.1.20.xml
  CPS_NJ501_1420_Ver.1.20.xml
  CPS_NJ501_1500_Ver.1.20.xml
  CPS_NJ501_1520_Ver.1.20.xml
  CPS_NJ501_4300_Ver.1.20.xml
  CPS_NJ501_4310_Ver.1.20.xml
  CPS_NJ501_4320_Ver.1.20.xml
  CPS_NJ501_4400_Ver.1.20.xml
  CPS_NJ501_4500_Ver.1.20.xml
  CPS_NJ501_5300_Ver.1.20.xml

－ ：CX-One Version 4 Auto-update (December 2018)

New functions

[CX-One Common Components]

• Support the following new models.
  CS1D-CPU[][]HA, CS1D-CPU[][]SA
  

[CPS]

• Added the following files.
  CPS_CS1D-CPU44SA_Ver4_0.xml
  CPS_CS1D-CPU67SA_Ver4_0.xml
  CPS_CS1D-CPU67HA_Ver4_0.xml
  CPS_CS1D-CPU68HA_Ver4_0.xml

Improved functions

[IO Table]

• On the window to monitor current consumption, CS1D-series Power Supply Unit CS1D-PD025 became selectable.
• Solved the problem that the unit version of CS1W/CJ1W-V680C[][] could not be acquired properly.
  

[CX-Server]

• Solved the problem that the CX-Server might terminate abnormally if a file was opened in some CX-One applications.

－ ：CX-One Version 4 Auto-update (October 2018)

New functions

[Position Control Unit (Model: CJ1W-NC[]81/[]82) setting component]

• Support EtherCAT I/O Terminal Units GX-AD/DA/ID/OD/MD/OC/EC Unit Version 1.2.

－ ：CX-One Version 4 Auto-update (July 2018)

New functions

<CX-Server>

• Added EDS files for the following NX102 series Controllers.
  NX102-1220, NX102-1120, NX102-1020, NX102-9020
  
  <CPS>
• Added the following files.
  CPS_NJ101_1000_Ver.1.19.xml
  CPS_NJ101_1020_Ver.1.19.xml
  CPS_NJ101_9000_Ver.1.19.xml
  CPS_NJ101_9020_Ver.1.19.xml
  CPS_NJ301_1100_Ver.1.19.xml
  CPS_NJ301_1200_Ver.1.19.xml
  CPS_NJ501_1300_Ver.1.19.xml
  CPS_NJ501_1320_Ver.1.19.xml
  CPS_NJ501_1340_Ver.1.19.xml
  CPS_NJ501_1400_Ver.1.19.xml
  CPS_NJ501_1420_Ver.1.19.xml
  CPS_NJ501_1500_Ver.1.19.xml
  CPS_NJ501_1520_Ver.1.19.xml
  CPS_NJ501_4300_Ver.1.19.xml
  CPS_NJ501_4310_Ver.1.19.xml
  CPS_NJ501_4320_Ver.1.19.xml
  CPS_NJ501_4400_Ver.1.19.xml
  CPS_NJ501_4500_Ver.1.19.xml
  CPS_NJ501_5300_Ver.1.19.xml

Improved functions

<PLC Backup Tool>

• Solved the problem that detailed comparison could not be executed for programs when the programs of the CPU Units were compared and did not match.

－ ：CX-One Version 4 Auto-update (April 2018)

<Cmn1804_0404Setup.exe>

New functions

• Supports the following controllers.
  NX102-series controllers

－ ：CX-One Version 4 Auto-update (April 2018)

<Cmn1804_0401Setup.exe>

New functions

[CPS]

• Added the following files.
  CPS_NJ101_1000_Ver.1.18.xml
  CPS_NJ101_1020_Ver.1.18.xml
  CPS_NJ301_1100_Ver.1.18.xml
  CPS_NJ301_1200_Ver.1.18.xml
  CPS_NJ501_1300_Ver.1.18.xml
  CPS_NJ501_1320_Ver.1.18.xml
  CPS_NJ501_1340_Ver.1.18.xml
  CPS_NJ501_1400_Ver.1.18.xml
  CPS_NJ501_1420_Ver.1.18.xml
  CPS_NJ501_1500_Ver.1.18.xml
  CPS_NJ501_1520_Ver.1.18.xml
  CPS_NJ501_4300_Ver.1.18.xml
  CPS_NJ501_4320_Ver.1.18.xml
  CPS_NJ501_4400_Ver.1.18.xml
  CPS_NJ501_4500_Ver.1.18.xml
  CPS_NJ501_5300_Ver.1.18.xml
  

[CX-Server]

• Support connection to the 1S-series Servo Drives via CJ-series Controller.
  

Improved functions

[CX-Server]

• Solved the problem that the CX-Server might terminate abnormally if a file was opened in some CX-One applications.

－ ：CX-One Version 4 Auto-update (January 2018)

New functions

[CPS]

• Added the following files.
  CPS_NJ501-1300_Ver1_17.xml
  CPS_NJ501-1400_Ver1_17.xml
  CPS_NJ501-1500_Ver1_17.xml
  

[Position Control Unit (CJ1W-NC[]81/[]82) setting component]

• Support EtherCAT I/O Terminal Unit, Model: GX-ID/OD/MD3284-T.

－ ：CX-One Version 4 Auto-update (October 2017)

New functions

[CPS]

• Added the following files.
  CPS_NJ101-1000_Ver1_16.xml
  CPS_NJ101-1020_Ver1_16.xml
  CPS_NJ101-9000_Ver1_16.xml
  CPS_NJ101-9020_Ver1_16.xml
  CPS_NJ301-1100_Ver1_16.xml
  CPS_NJ301-1200_Ver1_16.xml
  CPS_NJ501-1300_Ver1_16.xml
  CPS_NJ501-1320_Ver1_16.xml
  CPS_NJ501-1340_Ver1_16.xml
  CPS_NJ501-1400_Ver1_16.xml
  CPS_NJ501-1420_Ver1_16.xml
  CPS_NJ501-1500_Ver1_16.xml
  CPS_NJ501-1520_Ver1_16.xml
  CPS_NJ501-4300_Ver1_16.xml
  CPS_NJ501-4310_Ver1_16.xml
  CPS_NJ501-4320_Ver1_16.xml
  CPS_NJ501-4400_Ver1_16.xml
  CPS_NJ501-4500_Ver1_16.xml
  CPS_NJ501-5300_Ver1_16.xml
  

[CX-Server]

• Support the NJ501-5300 CPU Unit.

Improved functions

[CX-Server]

• Solved the problem that computers with Windows 10 Ver.1607 or later could not connect to a PLC or a NS via USB since the computer requires electronic signiture for USB driver.

－ ：CX-One Version 4 Auto-update (June 2017)

New functions

<Cmn1706_0401Setup.exe>

[CPS]

• Added the following files.
  CPS_CJ1W-NC281_Ver1_6.xml
  CPS_CJ1W-NC481_Ver1_6.xml
  CPS_CJ1W-NC881_Ver1_6.xml
  CPS_CJ1W-NCF81_Ver1_6.xml
  CPS_CJ1W-NC482_Ver1_6.xml
  CPS_CJ1W-NC882_Ver1_6.xml
  CPS_CJ1W-NCF82_Ver1_6.xml
  CPS_NJ101-1000_Ver1_15.xml
  CPS_NJ101-1020_Ver1_15.xml
  CPS_NJ101-9000_Ver1_15.xml
  CPS_NJ101-9020_Ver1_15.xml
  CPS_NJ301-1100_Ver1_15.xml
  CPS_NJ301-1200_Ver1_15.xml
  CPS_NJ501-1300_Ver1_15.xml
  CPS_NJ501-1320_Ver1_15.xml
  CPS_NJ501-1340_Ver1_15.xml
  CPS_NJ501-1400_Ver1_15.xml
  CPS_NJ501-1420_Ver1_15.xml
  CPS_NJ501-1500_Ver1_15.xml
  CPS_NJ501-1520_Ver1_15.xml
  CPS_NJ501-4300_Ver1_15.xml
  CPS_NJ501-4310_Ver1_15.xml
  CPS_NJ501-4320_Ver1_15.xml
  CPS_NJ501-4400_Ver1_15.xml
  CPS_NJ501-4500_Ver1_15.xml
  

[CX-Server]

• Support the connection between the NX I/O Units and NX-IO Configurator.

Improved functions

<Cmn1706_0401Setup.exe>

• Solved the problem that it becomes impossible to perform operation if settings tab page is opened while a data trace file is opened.
  
  <Cmn1610_0403Setup.exe>
• Sysmac Studio/CX-One can be updated by installing this update.
• The user needs to restart the system after installing this update.
  

－ ：CX-One Version 4 Auto-update (April 2017)

Improved functions

<Cmn1704_0404Setup.exe>

[CX-Server]

• Solved the problem that the CX-Programmer sometimes failed to work online simulator, transfer to PLC and access the memory card.

－ ：CX-One Version 4 Auto-update (April 2017)

New functions

<Cmn1704_0401Setup.exe>

[CPS]

• Added the following files.
  CPS_NJ101-1000_Ver1_14.xml
  CPS_NJ101-1020_Ver1_14.xml
  CPS_NJ101-9000_Ver1_14.xml
  CPS_NJ101-9020_Ver1_14.xml
  CPS_NJ301-1100_Ver1_14.xml
  CPS_NJ301-1200_Ver1_14.xml
  CPS_NJ501-1300_Ver1_14.xml
  CPS_NJ501-1320_Ver1_14.xml
  CPS_NJ501-1340_Ver1_14.xml
  CPS_NJ501-1400_Ver1_14.xml
  CPS_NJ501-1420_Ver1_14.xml
  CPS_NJ501-1500_Ver1_14.xml
  CPS_NJ501-1520_Ver1_14.xml
  CPS_NJ501-4300_Ver1_14.xml
  CPS_NJ501-4310_Ver1_14.xml
  CPS_NJ501-4320_Ver1_14.xml
  CPS_NJ501-4400_Ver1_14.xml
  CPS_NJ501-4500_Ver1_14.xml
  CPS_E5CD_Ver0_0.xml
  CPS_E5ED_Ver0_0.xml

Improved functions

<Cmn1704_0401Setup.exe>

[CX-Server]

• Solved the problem that the OS might cause blue screen when transferring screen data of CX-Designer via USB.
• Solved the problem that CX-Server might terminate abnormally if a memory card containing more than 1000 files or subfolders is mounted in the PLC and referenced by CX-Programmer.
• Solved the problem that the memory consumption of CX-Server greatly increased when connecting with NJ-series controller.

－ ：CX-One Version 4 Auto-update (October 2016)

New functions

<Cmn1610_0401Setup.exe>

[CPS]

• Added the following files.
  CPS_NJ101-1000_Ver1_13.xml
  CPS_NJ101-1020_Ver1_13.xml
  CPS_NJ101-9000_Ver1_13.xml
  CPS_NJ101-9020_Ver1_13.xml
  CPS_NJ301-1100_Ver1_13.xml
  CPS_NJ301-1200_Ver1_13.xml
  CPS_NJ501-1300_Ver1_13.xml
  CPS_NJ501-1320_Ver1_13.xml
  CPS_NJ501-1340_Ver1_13.xml
  CPS_NJ501-1400_Ver1_13.xml
  CPS_NJ501-1420_Ver1_13.xml
  CPS_NJ501-1500_Ver1_13.xml
  CPS_NJ501-1520_Ver1_13.xml
  CPS_NJ501-4300_Ver1_13.xml
  CPS_NJ501-4310_Ver1_13.xml
  CPS_NJ501-4320_Ver1_13.xml
  CPS_NJ501-4400_Ver1_13.xml
  CPS_NJ501-4500_Ver1_13.xml

Improved functions

<Cmn1610_0401Setup.exe>

• Solved the problem that some units could not be backed up or restored by PLC Backup Tool.
  

[CX-Server]

• Solved the problem that specific computers could not connect to a PLC via USB.

－ ：CX-One Version 4 Auto-update (July 2016)

Improved functions

[CX-Server]

• Solved the problem that CX-Integrator or CX-Thermo could not connect to a temperature controller if CX-Server Ver.5.0.16.3 is installed.

－ ：CX-One Version 4 Auto-update (July 2016)

New functions

[CPS]

• Added the following files.
  CPS_NJ101-1000_Ver1_12.xml
  CPS_NJ101-1020_Ver1_12.xml
  CPS_NJ101-9000_Ver1_12.xml
  CPS_NJ101-9020_Ver1_12.xml
  CPS_NJ301-1100_Ver1_12.xml
  CPS_NJ301-1200_Ver1_12.xml
  CPS_NJ501-1300_Ver1_12.xml
  CPS_NJ501-1320_Ver1_12.xml
  CPS_NJ501-1340_Ver1_12.xml
  CPS_NJ501-1400_Ver1_12.xml
  CPS_NJ501-1420_Ver1_12.xml
  CPS_NJ501-1500_Ver1_12.xml
  CPS_NJ501-1520_Ver1_12.xml
  CPS_NJ501-4300_Ver1_12.xml
  CPS_NJ501-4310_Ver1_12.xml
  CPS_NJ501-4320_Ver1_12.xml
  CPS_NJ501-4400_Ver1_12.xml
  CPS_NJ501-4500_Ver1_12.xml

Improved functions

• Support the E3NX-CA[][] Color Fiber Amplifier Unit.
  

[CX-Server]

• Solved the CX-Programmer's problem that a specific program could not be transferred to CJ1-H-R.
• Solved the CX-Integrator's problem that the software could not connect to CJ1W-DRM21 or CJ1W-CRM21 mounted on NJ101.
• Solved the problem that the operating system resulted in the blue screen when the computer was connected to a PLC via a specific path in the USB connection.

－ ：CX-One Version 4 Auto-update (April 2016)

New functions [Cmn1604_0401Setup.exe]

[CPS]

• Added the following files.
  CPS_NJ101-1000_Ver1_11.xml
  CPS_NJ101-1020_Ver1_11.xml
  CPS_NJ101-9000_Ver1_11.xml
  CPS_NJ101-9020_Ver1_11.xml
  CPS_NJ301-1100_Ver1_11.xml
  CPS_NJ301-1200_Ver1_11.xml
  CPS_NJ501-1300_Ver1_11.xml
  CPS_NJ501-1320_Ver1_11.xml
  CPS_NJ501-1340_Ver1_11.xml
  CPS_NJ501-1400_Ver1_11.xml
  CPS_NJ501-1420_Ver1_11.xml
  CPS_NJ501-1500_Ver1_11.xml
  CPS_NJ501-1520_Ver1_11.xml
  CPS_NJ501-4300_Ver1_11.xml
  CPS_NJ501-4310_Ver1_11.xml
  CPS_NJ501-4320_Ver1_11.xml
  CPS_NJ501-4400_Ver1_11.xml
  CPS_NJ501-4500_Ver1_11.xml
  

Improved functions [Cmn1604_0401Setup.exe]

• Changed the help file format from HLP to CHM.

Improved functions [Cmn1604_0402Setup.exe]

• You can use the updates of the following Support Software after installing this update.
  Sysmac Studio
  CX-Motion Pro Ver.1.43 or higher
  CX-Drive Ver.2.92 or higher
  CX-ConfiguratorFDT Ver.2.00 or higher
• You must restart your computer after installing this update.

－ ：CX-One Version 4 Auto-update (October 2015)

New functions

[CX-Server]

• Supports the following versions of the CS/CJ/CP series CPU Units.
  CJ2H(-EIP) Ver.1.5
  CJ2M Ver.2.1
  CS1G-H Ver.4.1
  CS1H-H Ver.4.1
  CJ1G-P Ver.4.1
  CS1D-H Ver.1.4
  CS1D-S Ver.2.1
  CP1H-XA Ver.1.3
  CP1H-X Ver.1.3
  CP1H-Y Ver.1.3
  CP1L-M Ver.1.1
  CP1L-L Ver.1.1
  CP1L-EM Ver.1.1
  CP1L-EL Ver.1.1
  CP1E-E Ver.1.3
  CP1E-N Ver.1.3
• Supports the following NJ Controller.
  NJ101-[]020

[PLC Backup Tool]

• Support the extended read protection by password for CS/CJ/CP series CPU Units.
  

[NewNCF]

• Supports the following functions of CJ1W-[]82 Ver.1.5 Units.
  Electronic cam
  Cam table
  Encoder axis
  Helical interpolation
  

[CPS]

• Added the following files.
  CPS_CJ1G-CPU42H_Ver4_1.xml
  CPS_CJ1G-CPU43H_Ver4_1.xml
  CPS_CJ1G-CPU44H_Ver4_1.xml
  CPS_CJ1G-CPU45H_Ver4_1.xml
  CPS_CJ2H-CPU64_Ver1_5.xml
  CPS_CJ2H-CPU64-EIP_Ver1_5.xml
  CPS_CJ2H-CPU65_Ver1_5.xml
  CPS_CJ2H-CPU65-EIP_Ver1_5.xml
  CPS_CJ2H-CPU66_Ver1_5.xml
  CPS_CJ2H-CPU66-EIP_Ver1_5.xml
  CPS_CJ2H-CPU67_Ver1_5.xml
  CPS_CJ2H-CPU67-EIP_Ver1_5.xml
  CPS_CJ2H-CPU68_Ver1_5.xml
  CPS_CJ2H-CPU68-EIP_Ver1_5.xml
  CPS_CJ2M-CPU11_Ver2_1.xml
  CPS_CJ2M-CPU12_Ver2_1.xml
  CPS_CJ2M-CPU13_Ver2_1.xml
  CPS_CJ2M-CPU14_Ver2_1.xml
  CPS_CJ2M-CPU15_Ver2_1.xml
  CPS_CJ2M-CPU31_Ver2_1.xml
  CPS_CJ2M-CPU32_Ver2_1.xml
  CPS_CJ2M-CPU33_Ver2_1.xml
  CPS_CJ2M-CPU34_Ver2_1.xml
  CPS_CJ2M-CPU35_Ver2_1.xml
  CPS_CP1H-X40DR-A_Ver1_3.xml
  CPS_CP1H-X40DT-D_Ver1_3.xml
  CPS_CP1H-X40DT1-D_Ver1_3.xml
  CPS_CP1H-XA40DR-A_Ver1_3.xml
  CPS_CP1H-XA40DT1-D_Ver1_3.xml
  CPS_CP1H-XA40DT-D_Ver1_3.xml
  CPS_CP1H-Y20DT-D_Ver1_3.xml
  CPS_CP1L-EL20DR-D_Ver1_1.xml
  CPS_CP1L-EL20DT1-D_Ver1_1.xml
  CPS_CP1L-EL20DT-D_Ver1_1.xml
  CPS_CP1L-EM30DR-D_Ver1_1.xml
  CPS_CP1L-EM30DT1-D_Ver1_1.xml
  CPS_CP1L-EM30DT-D_Ver1_1.xml
  CPS_CP1L-EM40DR-D_Ver1_1.xml
  CPS_CP1L-EM40DT1-D_Ver1_1.xml
  CPS_CP1L-EM40DT-D_Ver1_1.xml
  CPS_CP1L-L10DR-A_Ver1_1.xml
  CPS_CP1L-L10DR-D_Ver1_1.xml
  CPS_CP1L-L10DT1-D_Ver1_1.xml
  CPS_CP1L-L10DT-A_Ver1_1.xml
  CPS_CP1L-L10DT-D_Ver1_1.xml
  CPS_CP1L-L14DR-A_Ver1_1.xml
  CPS_CP1L-L14DR-D_Ver1_1.xml
  CPS_CP1L-L14DT1-D_Ver1_1.xml
  CPS_CP1L-L14DT-A_Ver1_1.xml
  CPS_CP1L-L14DT-D_Ver1_1.xml
  CPS_CP1L-L20DR-A_Ver1_1.xml
  CPS_CP1L-L20DR-D_Ver1_1.xml
  CPS_CP1L-L20DT1-D_Ver1_1.xml
  CPS_CP1L-L20DT-A_Ver1_1.xml
  CPS_CP1L-L20DT-D_Ver1_1.xml
  CPS_CP1L-M30DR-A_Ver1_1.xml
  CPS_CP1L-M30DR-D_Ver1_1.xml
  CPS_CP1L-M30DT1-D_Ver1_1.xml
  CPS_CP1L-M30DT-A_Ver1_1.xml
  CPS_CP1L-M30DT-D_Ver1_1.xml
  CPS_CP1L-M40DR-A_Ver1_1.xml
  CPS_CP1L-M40DR-D_Ver1_1.xml
  CPS_CP1L-M40DT1-D_Ver1_1.xml
  CPS_CP1L-M40DT-A_Ver1_1.xml
  CPS_CP1L-M40DT-D_Ver1_1.xml
  CPS_CP1L-M60DR-A_Ver1_1.xml
  CPS_CP1L-M60DR-D_Ver1_1.xml
  CPS_CP1L-M60DT1-D_Ver1_1.xml
  CPS_CP1L-M60DT-A_Ver1_1.xml
  CPS_CP1L-M60DT-D_Ver1_1.xml
  CPS_CS1D-CPU65H_Ver1_4.xml
  CPS_CS1D-CPU67H_Ver1_4.xml
  CPS_CS1D-CPU42S_Ver2_1.xml
  CPS_CS1D-CPU44S_Ver2_1.xml
  CPS_CS1D-CPU65S_Ver2_1.xml
  CPS_CS1D-CPU67S_Ver2_1.xml
  CPS_CS1G-CPU42H_Ver4_1.xml
  CPS_CS1G-CPU43H_Ver4_1.xml
  CPS_CS1G-CPU44H_Ver4_1.xml
  CPS_CS1G-CPU45H_Ver4_1.xml
  CPS_CS1H-CPU63H_Ver4_1.xml
  CPS_CS1H-CPU64H_Ver4_1.xml
  CPS_CS1H-CPU65H_Ver4_1.xml
  CPS_CS1H-CPU66H_Ver4_1.xml
  CPS_CS1H-CPU67H_Ver4_1.xml
  CPS_CJ1W-NC281_Ver1_5.xml
  CPS_CJ1W-NC481_Ver1_5.xml
  CPS_CJ1W-NC482_Ver1_5.xml
  CPS_CJ1W-NC881_Ver1_5.xml
  CPS_CJ1W-NC882_Ver1_5.xml
  CPS_CJ1W-NCF81_Ver1_5.xml
  CPS_CJ1W-NCF82_Ver1_5.xml
  CPS_NJ501-4300_Ver1_10.xml
  CPS_NJ501-4310_Ver1_10.xml
  CPS_NJ501-4320_Ver1_10.xml
  CPS_NJ501-4400_Ver1_10.xml
  CPS_NJ501-4500_Ver1_10.xml
  CPS_NJ101-1020_Ver1_10.xml
  CPS_NJ101-9020_Ver1_10.xml

Improved functions

• Corrected a wrong description about the PLCs applicable to the program error commands in the help file of the error history component.

－ ：CX-One Version 4 Auto-update (April 2015)

New functions

[CPS]

• Added the following files.
  CPS_NSJ10-TV00_Ver8_7.xml
  CPS_NSJ10-TV00_Ver8_8.xml
  CPS_NSJ10-TV00_Ver8_9.xml
  CPS_NSJ10-TV01_Ver8_7.xml
  CPS_NSJ10-TV01_Ver8_8.xml
  CPS_NSJ10-TV01_Ver8_9.xml
  CPS_NSJ12-TS00_Ver8_7.xml
  CPS_NSJ12-TS00_Ver8_8.xml
  CPS_NSJ12-TS00_Ver8_9.xml
  CPS_NSJ12-TS01_Ver8_7.xml
  CPS_NSJ12-TS01_Ver8_8.xml
  CPS_NSJ12-TS01_Ver8_9.xml
  CPS_NSJ5-SQ00_Ver8_7.xml
  CPS_NSJ5-SQ00_Ver8_8.xml
  CPS_NSJ5-SQ00_Ver8_9.xml
  CPS_NSJ5-SQ01_Ver8_7.xml
  CPS_NSJ5-SQ01_Ver8_8.xml
  CPS_NSJ5-SQ01_Ver8_9.xml
  CPS_NSJ5-SQ10_Ver8_7.xml
  CPS_NSJ5-SQ10_Ver8_8.xml
  CPS_NSJ5-SQ10_Ver8_9.xml
  CPS_NSJ5-SQ11_Ver8_7.xml
  CPS_NSJ5-SQ11_Ver8_8.xml
  CPS_NSJ5-SQ11_Ver8_9.xml
  CPS_NSJ5-TQ00_Ver8_7.xml
  CPS_NSJ5-TQ00_Ver8_8.xml
  CPS_NSJ5-TQ00_Ver8_9.xml
  CPS_NSJ5-TQ01_Ver8_7.xml
  CPS_NSJ5-TQ01_Ver8_8.xml
  CPS_NSJ5-TQ01_Ver8_9.xml
  CPS_NSJ5-TQ10_Ver8_7.xml
  CPS_NSJ5-TQ10_Ver8_8.xml
  CPS_NSJ5-TQ10_Ver8_9.xml
  CPS_NSJ5-TQ11_Ver8_7.xml
  CPS_NSJ5-TQ11_Ver8_8.xml
  CPS_NSJ5-TQ11_Ver8_9.xml
  CPS_NSJ8-TV00_Ver8_7.xml
  CPS_NSJ8-TV00_Ver8_8.xml
  CPS_NSJ8-TV00_Ver8_9.xml
  CPS_NSJ8-TV01_Ver8_7.xml
  CPS_NSJ8-TV01_Ver8_8.xml
  CPS_NSJ8-TV01_Ver8_9.xml
  CPS_CJ1W-ECT21_Ver1_0.xml

[CX-Server]

• Support the NJ101-[]000 CPU Units.

－ ：CX-One Version 4 Auto-update (March 2015)

Improved functions

[CX-Server]

• Corrected the list of PLC models supported by the common device driver of CX-Server.

－ ：CX-One Version 4 Auto-update (November 2014)

New functions

[CPS]

• Added the following files.
  CPS_CJ1W-EIP21_Ver3_0.xml
  CPS_CJ2B-EIP21_Ver3_0.xml
  CPS_CS1W-EIP21_Ver3_0.xml
  

－ ：CX-One Version 4 Auto-update (October 2014)

New functions [Cmn1410_0401Setup.exe]

[CPS]

• Added the following file.
  CPS_NJ501-1340_Ver1_9.xml
  

[CX-Server]

• Support the NJ-series NJ501-1340 SECS/GEM CPU Units.
  

[NewNCF]

• Support Position Control Units (with Built-in EtherCAT Communications) Ver. 1.4.

Improved functions [Cmn1410_0401Setup.exe]

• Solved the problem that backing up the tag data link settings might fail when EIP Unit data is backed up using PLC Backup Tool.

Improved functions [Cmw1410_0101Setup.exe]

• Provided the detailed status codes for errors in the communications with USB-connected Communications Couplers.

－ ：CX-One Version 4 Auto-update (June 2014)

New functions [Cmn1406_0401Setup.exe]

• Support the ZW-series Displacement Sensors Rev.1.1.

Improved functions [Cmn1406_0401Setup.exe]

• Solved the problem that CX-Net did not return any response when opening an SL3 file with CX-Net if a specific text string was used for PLC name of a Relay PLC.

Improved functions [Cmw1406_0101Setup.exe]

• Improved the stability of the communication.

－ ：CX-One Version 4 Auto-update (March 2014)

New functions

[CPS]

• Added the following files.
  CPS_E5GC_Ver0_0.xml

－ ：CX-One Version 4 Auto-update (January 2014)

New functions [Cmn1401_0401Setup.exe]

[CPS]

• Added the following files.
  CPS_NJ301-1100_Ver1_8.xml
  CPS_NJ301-1200_Ver1_8.xml
  CPS_NJ501-1300_Ver1_8.xml
  CPS_NJ501-1320_Ver1_8.xml
  CPS_NJ501-1400_Ver1_8.xml
  CPS_NJ501-1420_Ver1_8.xml
  CPS_NJ501-1500_Ver1_8.xml
  CPS_NJ501-1520_Ver1_8.xml
  CPS_NJ501-4300_Ver1_8.xml
  CPS_NJ501-4310_Ver1_8.xml
  CPS_NJ501-4400_Ver1_8.xml
  CPS_NJ501-4500_Ver1_8.xml

Improved functions [Cmn1401_0402Setup.exe]

• You can use the updates of following Support Software after installing this update.
  Sysmac Studio
  CX-Motion Pro V1.43 or higher
  CX-Drive V2.92 or higher
  CX-ConfiguratorFDT V2.00 or higher
• You must restart your computer after installing this update.

－ ：CX-One Version 4 Auto-update (September 2013)

New functions [Cmn1309_0401Setup.exe]

[CPS]

• Added the following files.
  CPS_CJ1W-SPU01_Ver2_2.xml
  CPS_CS1W-SPU01_Ver2_2.xml
  CPS_CS1W-SPU02_Ver2_2.xml
  CPS_NJ301-1100_Ver1_7.xml
  CPS_NJ301-1200_Ver1_7.xml
  CPS_NJ501-1300_Ver1_7.xml
  CPS_NJ501-1320_Ver1_7.xml
  CPS_NJ501-1400_Ver1_7.xml
  CPS_NJ501-1420_Ver1_7.xml
  CPS_NJ501-1500_Ver1_7.xml
  CPS_NJ501-1520_Ver1_7.xml
  CPS_NJ501-4300_Ver1_7.xml
  CPS_NJ501-4310_Ver1_7.xml
  CPS_NJ501-4400_Ver1_7.xml
  CPS_NJ501-4500_Ver1_7.xml

Improved functions [Cmn1309_0401Setup.exe]

• Solved the problem that a success message was displayed when a Clear All Memory Areas operation was executed for a CJ2 that had an I/O Bus Error.

Improved functions [Cmn1309_0402Setup.exe]

• You can use the updates of following Support Software after installing this update.
  CX-Motion Pro V1.43 or higher
  CX-Drive V2.92 or higher
  CX-Configurator V2.00 or higher
• You must restart your computer after installing this update.

－ ：CX-One Version 4 Auto-update (June 2013)

New functions

[CPS]

• Added the following files.
  CPS_NJ301-1100_Ver1_6.xml
  CPS_NJ301-1200_Ver1_6.xml
  CPS_NJ501-1300_Ver1_6.xml
  CPS_NJ501-1320_Ver1_5.xml
  CPS_NJ501-1400_Ver1_6.xml
  CPS_NJ501-1420_Ver1_5.xml
  CPS_NJ501-1500_Ver1_6.xml
  CPS_NJ501-1520_Ver1_5.xml
  CPS_E5DC_Ver0_0.xml

Improved functions

• Solved the problem that the local network may be assigned to the peripheral port when it is added to Unit 0 Port 1 in the PLC routing table.
• Solved the problem that Differential Monitor executions may fail in NS-Thru and NV-Thru.

－ ：CX-One Version 4 Auto-update (February 2013)

New functions

[CPS]

• Added the following files.
  CPS_NJ301-1100_Ver1_4.xml
  CPS_NJ301-1200_Ver1_4.xml
  CPS_NJ501-1300_Ver1_4.xml
  CPS_NJ501-1400_Ver1_4.xml
  CPS_NJ501-1500_Ver1_4.xml
  CPS_NJ501-4300_Ver1_4.xml
  CPS_NJ501-4310_Ver1_4.xml
  CPS_NJ501-4400_Ver1_4.xml
  CPS_NJ501-4500_Ver1_4.xml

Improved functions

[CPS]

• Updated the following files.
  CPS_CJ1W-SCU22_Ver2_0.xml
  CPS_CJ1W-SCU22_Ver2_1.xml
  CPS_CJ1W-SCU32_Ver2_0.xml
  CPS_CJ1W-SCU32_Ver2_1.xml
  CPS_CJ1W-SCU42_Ver2_0.xml
  CPS_CJ1W-SCU42_Ver2_1.xml
  
• Solved the problem that transferring the data to Position Control Unit fails if G5-series Servo Drive (Linear Motor Type) is in the EtherCAT network.
• Revised the PLC Connection Cable Selection Guide.

－ ：CX-One Version 4 Auto-update (November 2012)

New functions

[CX-Server]

• Support the CP1E-E60 CPU Units.
  Support the CP1E-E60SDR-A.

Improved functions

• Solved the problem that protocol macro may not be backed up by PLC Backup Tool.

－ ：CX-One Version 4 Auto-update (September 2012)

New functions

[CPS]

• Added the following files.
  CPS_CJ2B-EIP21_Ver2_1.xml
  CPS_CS1W-EIP21_Ver2_1.xml

－ ：CX-One Version 4 Auto-update (August 2012)

New functions

[CPS]

• Added the following files.
  CPS_CJ1W-SCU22_Ver2_1.xml
  CPS_CJ1W-SCU32_Ver2_1.xml
  CPS_CJ1W-SCU42_Ver2_1.xml

Improved functions

[CX-Server]

• Solved the problem that online connection through EtherNet/IP may fail when a specific text string is used for device name of network card.
  
• Solved the problem that cannot edit the data link settings for model NS-CLK21.
• Solved the problem that fails to backup CJ2H Unit Ver.1.1 Built-in EIP Unit in PLC Backup tool.

－ ：CX-One Version 4 Auto-update (April 2012)

New functions

[CPS]

• Added the following files.
  CPS_CP1L-EL20DR-D_Ver1_0.xml
  CPS_CP1L-EL20DT1-D_Ver1_0.xml
  CPS_CP1L-EL20DT-D_Ver1_0.xml
  CPS_CP1L-EM30DR-D_Ver1_0.xml
  CPS_CP1L-EM30DT1-D_Ver1_0.xml
  CPS_CP1L-EM30DT-D_Ver1_0.xml
  CPS_CP1L-EM40DR-D_Ver1_0.xml
  CPS_CP1L-EM40DT1-D_Ver1_0.xml
  CPS_CP1L-EM40DT-D_Ver1_0.xml
  CPS_CP1L-ETN21_Ver0_0.xml
  CPS_CP1L-ETN21_Ver1_0.xml
  

[CX-Server]

• Support the CP1L-EL / -EM CPU Units.
  Support the models CP1L-EL[][][][]-[] and CP1L-EM[][][][]-[].
  

[NewNCF]

• Support G5-series Servo Drive (with Built-in EtherCAT Communications Linear Motor Type) Ver1.1 to be released soon.
• Support 3G3RX-series Inverter to be released soon.

Improved functions

[CPS]

• Updated the following files.
  CPS_CJ1W-OD233_Ver0_0.xml
  CPS_CJ1W-CT021_Ver0_0.xml
  CPS_CJ1W-CT021_Ver1_0.xml
  CPS_CS1W-CT021_Ver0_0.xml
  CPS_CS1W-CT041_Ver0_0.xml
  

[CX-Server]

• Support making the response timeout setting when CJ2-series select USB or EtherNet/IP for the Network Type.
• Solved the problem that the Change PLC dialog may not be displayed in the case of connection via a gateway PLC.

－ ：CX-One Version 4 Auto-update (February 2012)

New functions

[CPS]

• Added the following file.
  CPS_CJ1W-EIP21_Ver2_1.xml

Improved functions

• Solved the problem that prevented normal calculation of current and width on I/O table of Position Control Unit (CJ1W-NC[]81 and CJ1W-NC[]82).
• Solved the problem that prevented normal display of velocity on Memory Operation Preview if the Axis Type is Unlimited Axis(Rotation Axis).
• Solved the problem that prevented normal display of acceleration time on Memory Operation Preview when you operate interpolation with Memory Operation.

－ ：CX-One Version 4 Auto-update (November 2011)

New functions

[CPS]

• Added the following files.
  CPS_E5CC_Ver0_0.xml
  CPS_E5EC_Ver0_0.xml

Improved functions

• Solved the problem that the Command Pulse Count Per Motor Rotation and the Work Travel Distance per Motor Rotation were not calculated correctly in the electronic gear setting function.
• Improved the CX-One AutoUpdate Tool so that it can be used commonly with other Omron Tools.
• Solved the problem that GRT1-CRT SmartSlice I/O is not displayed in the component list of CX-Integrator.

－ ：CX-One Version 4 Auto-update (August 2011)

Improved functions

[CPS]

• Added the following files.
  CPS_CJ1W-PNT21_Ver0_0.xml
  CPS_CS1W-PNT21_Ver0_0.xml
  CPS_CJ1W-SCU21-V1_Ver1_3.xml
  CPS_CJ1W-SCU22_Ver2_0.xml
  CPS_CJ1W-SCU31-V1_Ver1_3.xml
  CPS_CJ1W-SCU32_Ver2_0.xml
  CPS_CJ1W-SCU41-V1_Ver1_3.xml
  CPS_CJ1W-SCU42_Ver2_0.xml
  CPS_CS1W-SCB21-V1_Ver1_3.xml
  CPS_CS1W-SCB41-V1_Ver1_3.xml
  CPS_CS1W-SCU21-V1_Ver1_3.xml
  CPS_CS1W-SCU31-V1_Ver1_3.xml
  
  Improved the setting component for Position Control Units (CJ1W-NC[]81 and CJ1W-NC[]82) in the following point:
• Solved the problem which caused communications errors at startup on rare occasions.

－ ：CX-One Version 4 Auto-update (May 2011)

New functions

[CPS]

• Added the following files.
  CPS_CJ1W-NC281_Ver1_3.xml
  CPS_CJ1W-NC481_Ver1_3.xml
  CPS_CJ1W-NC881_Ver1_3.xml
  CPS_CJ1W-NCF81_Ver1_3.xml
  CPS_CJ1W-NC482_Ver1_3.xml
  CPS_CJ1W-NC882_Ver1_3.xml
  CPS_CJ1W-NCF82_Ver1_3.xml
  

[Support of New Types]

• Support the Position Control Units with EtherCAT communications (models CJ1W-NC281, 481, 881, F81, 482, 882, and F82 in Ver.1.3).
  
  Added the following functions to setting component for Position Control Units (models CJ1W-NC[]81and []82).
• Parameters and memory operation sequence data can be imported and exported in csv format.
• Operations with memory operation sequence data can be undone and redone.
• Lines can be added to or deleted from memory operation sequence data.
• Pulse rate setting can be automatically calculated from machine configuration information.
  
  Added the following functions to setting component for Position Control Units (models CJ1W-NC[][]4).
• Range check determined by axis parameters can be reflected to memory operation sequence data.
• Parameters and memory operation sequence data can be imported and exported in csv format.
• Operations with memory operation sequence data can be undone and redone.
• Lines can be added to or deleted from memory operation sequence data.
  

Improved functions

• Can write into PLC system setting area (DM6144 to DM6655) of IDSC from PLC memory.

－ ：CX-One Version 4 Auto-update (January 2011)

New functions

• Added the PLC connection cable selection guide to the shortcut menu introduction guide library.
• CPU Bus Units can be registered as synchronization control target Units.
  

[CX-Server]

• Support the CJ2H Ver.1.4 CPU Unit.
  

[CPS]

• Added the following files.
  CPS_CJ2H-CPU64_Ver1_4.xml
  CPS_CJ2H-CPU65_Ver1_4.xml
  CPS_CJ2H-CPU66_Ver1_4.xml
  CPS_CJ2H-CPU67_Ver1_4.xml
  CPS_CJ2H-CPU68_Ver1_4.xml
  CPS_CJ2H-CPU64-EIP_Ver1_4.xml
  CPS_CJ2H-CPU65-EIP_Ver1_4.xml
  CPS_CJ2H-CPU66-EIP_Ver1_4.xml
  CPS_CJ2H-CPU67-EIP_Ver1_4.xml
  CPS_CJ2H-CPU68-EIP_Ver1_4.xml

Improved functions

• Solved the problem about transferring Unit setting. With the Windows Vista or Windows 7 to which MS Office2010 is installed, the Unit setting information of a part of Units could not be transferred.

－ ：CX-One Version 4 Auto-update (October 2010)

New functions

• Can reflect the range check in accordance with the Axis Parameter setting to Memory Operation Sequence Data on Position Control Unit (CJ1W-NC[]81 and CJ1W-NC[]82) Setting Component.
  

[CPS]

• Added the following file:
  CPS_CJ2M-EIP21_Ver2_1.xml
  

[Support of New Types]

• Support the built-in EIP Unit version 2.1 of CJ2M-CPU3[].
• Support the G5-series Servo Drive (EtherCAT communication type R88D-KN[]-ECT (the model without "-R")) which would be released shortly. On Position Control Unit (CJ1W-NC[]81 and CJ1W-NC[]82) Setting Component, the model R88D-KN[]-ECT-R is described as Ver.1.0 while the model R88D-KN[]-ECT (the model without "-R") as Ver.2.0.

Improved functions

• Solved the problem that disturbed error occurrence even if a Unit total power consumption exceeded the allowable consumption for a power supply.(CS/CJ PLC)
• Can transfer projects created by a previous version of Position Control Unit (CJ1W-NC[]81 and CJ1W-NC[]82) Setting Component on the new version, which was previously impossible.
• Solved the problem that the Axis Parameter editing screen could not start up when an out-of-range Axis Parameter was set on Position Control Unit (CJ1W-NC[]81 and CJ1W-NC[]82) Setting Component.
• Solved the problem that the Axis Parameter editing screen could not start up when an out-of-range Axis Parameter was set on Position Control Unit (CJ1W-NC[][]4) Setting Component
  .

[CX-Server]

• Enhanced the recovery function from communications errors at USB connection.

－ ：CX-One Version 4 Auto-update (July 2010)

New functions

[CPS]

• Added the following files:
  CPS_CJ1W-NC214_Ver1_1.xml
  CPS_CJ1W-NC234_Ver1_1.xml
  CPS_CJ1W-NC414_Ver1_1.xml
  CPS_CJ1W-NC434_Ver1_1.xml
  CPS_CJ1W-NC281_Ver1_1.xml
  CPS_CJ1W-NC481_Ver1_1.xml
  CPS_CJ1W-NC881_Ver1_1.xml
  CPS_CJ1W-NCF81_Ver1_1.xml
  CPS_CJ1W-NC482_Ver1_1.xml
  CPS_CJ1W-NC882_Ver1_1.xml
  CPS_CJ2M-CPU11_Ver2_0.xml
  CPS_CJ2M-CPU12_Ver2_0.xml
  CPS_CJ2M-CPU13_Ver2_0.xml
  CPS_CJ2M-CPU14_Ver2_0.xml
  CPS_CJ2M-CPU15_Ver2_0.xml
  CPS_CJ2M-CPU31_Ver2_0.xml
  CPS_CJ2M-CPU32_Ver2_0.xml
  CPS_CJ2M-CPU33_Ver2_0.xml
  CPS_CJ2M-CPU34_Ver2_0.xml
  CPS_CJ2M-CPU35_Ver2_0.xml
  CPS_NSJ5-SQ00_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ5-SQ01_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ5-SQ10_Ver8_1.xml to Ver8_2.xml
  CPS_NSJ5-SQ11_Ver8_1.xml to Ver8_2.xml
  CPS_NSJ5-TQ00_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ5-TQ01_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ5-TQ10_Ver8_1.xml to Ver8_2.xml
  CPS_NSJ5-TQ11_Ver8_1.xml to Ver8_2.xml
  CPS_NSJ8-TV00_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ8-TV01_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ10-TV00_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ10-TV01_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ12-TS00_Ver6_7.xml to Ver8_2.xml
  CPS_NSJ12-TS01_Ver6_7.xml to Ver8_2.xml
  CPS_CJ1W-V680C11_Ver1_2.xml
  CPS_CJ1W-V680C12_Ver1_2.xml
  CPS_CS1W-V680C11_Ver1_2.xml
  CPS_CS1W-V680C12_Ver1_2.xml

[Support of New Types]

• Support Position Control Units.
   Support models CJ1W-NC214, -NC234, -NC414, and -NC434 Ver.1.1.
• Support Position Control Units with EtherCAT interface.
   Support models CJ1W-NC281, -NC481, NC881, -NCF81,
  -NC482, and -NC882 Ver.1.1.
  

[CX-Server]

• Support Ethernet communications to CP1E-series PLCs by using CP1W-CIF41 Option Boards.
• Support CJ2M Ver.2.0 CPU Units.
  

[CX-One Information]

Added an application to the start menu to confirm version information.

－ ：CX-One Version 4 Auto-update (April 2010)

New functions

[Support of New Types]

• Support Position Control Units with EtherCAT interface.
  Support models CJ1W-NC281, -NC481, and -NC881.
  

[CPS]

• Added the following files
  CPS_CJ1W-NC281_Ver1_0.xml
  CPS_CJ1W-NC481_Ver1_0.xml
  CPS_CJ1W-NC881_Ver1_0.xml
  

Improved functions

• Solved the problem of the inconsistencies in display order and expression between the project tree and the transfer/verification screens of the Position Control Unit (CJ1W-NC[][]4) Setting Component.
• Solved the problem of the setting for the Axis Type parameter on Position Control Unit(CJ1W-NC[][]4) Setting Component, to prevent any setting other than the specified range.

－ ：CX-One Version 4 Auto-update (February 2010)

New functions

[CPS]

• Added the following files
  CPS_CJ2M-CPU11_Ver1_0.xml
  CPS_CJ2M-CPU12_Ver1_0.xml
  CPS_CJ2M-CPU13_Ver1_0.xml
  CPS_CJ2M-CPU14_Ver1_0.xml
  CPS_CJ2M-CPU15_Ver1_0.xml
  CPS_CJ2M-CPU31_Ver1_0.xml
  CPS_CJ2M-CPU32_Ver1_0.xml
  CPS_CJ2M-CPU33_Ver1_0.xml
  CPS_CJ2M-CPU34_Ver1_0.xml
  CPS_CJ2M-CPU35_Ver1_0.xml
  CPS_CJ2M-EIP21_Ver2_0.xml
  CPS_CJ2H-CPU64_Ver1_3.xml
  CPS_CJ2H-CPU64-EIP_Ver1_3.xml
  CPS_CJ2H-CPU65_Ver1_3.xml
  CPS_CJ2H-CPU65-EIP_Ver1_3.xml
  CPS_CJ2H-CPU66_Ver1_3.xml
  CPS_CJ2H-CPU66-EIP_Ver1_3.xml
  CPS_CJ2H-CPU67_Ver1_3.xml
  CPS_CJ2H-CPU67-EIP_Ver1_3.xml
  CPS_CJ2H-CPU68_Ver1_3.xml
  CPS_CJ2H-CPU68-EIP_Ver1_3.xml
  

[CX-Server]

• Supports CP1E CPU Units.
  Supports models CP1E-E10, -E14, -N14, and -N60.
• Supports CJ2M CPU Units.
  Supports models CJ2M-CPU[][].
• Supports CJ2H Ver.1.3 CPU Units.
• Can connect to CP1E-series CPU Units via SYSWAY.

Improved functions

• Changed and improved a unit in PCU (CJ1W-NC[][]4) parameter setting. The unit of Work Travel Distance per Monitor Rotation for Axis Parameter was changed to Display Unit.
• Unified and improved a unit in PCU (CJ1W-NC[][]4) parameter setting. The set value displays for Axis Parameter and Task Parameter were unified into the minimum setting unit (Command Unit).
• Solved the problem in PCU (CJ1W-NC[][]4) Memory Operation Preview. The value displayed by the Preview did not update the setting made by Unit multiplier of Axis Parameter.

－ ：Version V4.* → CX-One Version 4 Auto-update (December 2009)

Improved functions

[CX-Server]

• Can connect to CJ2H CPU Units via SYSWAY.

－ ：Version V4.* → CX-One Version 4 Auto-update (October 2009)

New functions

[CPS]

• Added the following files
  CPS_CJ1W-SCU22_Ver2_0.xml
  CPS_CJ1W-SCU32_Ver2_0.xml
  CPS_CJ1W-SCU42_Ver2_0.xml
  CPS_NS15-TX01-V2.xml
  CPS_CJ2H-CPU64_Ver1_2.xml
  CPS_CJ2H-CPU64-EIP_Ver1_2.xml
  CPS_CJ2H-CPU65_Ver1_2.xml
  CPS_CJ2H-CPU65-EIP_Ver1_2.xml
  CPS_CJ2H-CPU66_Ver1_2.xml
  CPS_CJ2H-CPU66-EIP_Ver1_2.xml
  CPS_CJ2H-CPU67_Ver1_2.xml
  CPS_CJ2H-CPU67-EIP_Ver1_2.xml
  CPS_CJ2H-CPU68_Ver1_2.xml
  CPS_CJ2H-CPU68-EIP_Ver1_2.xml

Improved functions

• Solved the problem of incorrect indication. When the Routing Table Component of the CX-Integrator was started up from the I/O table while the CJ1W-PH41U was mounted, the indication told it was "Ethernet".

[CX-Server]

• Improved the communication performance with DeviceNet Units that use USB-connected PLC as gateway.
• Solved the problem of unstable operation. The problem occurred when the PC that had no serial port or modem port was used to operate the C/CV-series PLC.

－ ：Version V4.* → CX-One Version 4 Auto-update (August 2009)

New functions

[CPS]

• Added the following files
  CPS_E5GN_Ver0_0.xml

Improved functions

• Fixed the comments that are displayed in the I/O table of CJ(S) 1W-CRM21.

Change history of CX-Programmer

Ver.9.84 : CX-One Version 4 Auto-update (January 2025)

Improved functions

• Solved the problem in which memory access violation might occur when a project file was opened.
• Solved the problem in which an unintended program might be transferred to the PLC when a variable containing ‘temp’ in the variable name was used on a program without registration in Variable Table.

Ver.9.83 : CX-One Version 4 Auto-update (October 2024)

Improved functions

• Solved the problem that the variable operands using automatically allocated address variables as the array head were not correctly restored, when they were uploaded.

Ver.9.82 : CX-One Version 4 Auto-update (April 2024)

Improved functions

• Solved the problem that changing the device to CP2E-N was impossible after importing a c5b file of C500, C120, or CxxP.
• Solved the problem that the number of uses was not counted correctly in the cross-reference report when the same IO address was used for the instruction parameter of the same program number of another task.
• Solved the problem that an error message might not appear for a failed program file (OBJ file) writing.
• Solved the problem that out-of-bounds memory corruption might occur when loading a malicious CX-Programmer project file.
• Solved the problem that a program error might occur in a program including address offset operand data when the program was transferred from PLC.

Ver.9.81 : CX-One Version 4 Auto-update (July 2023)

New functions

• Supports the following versions of the CPU Units.
  - CJ2H-CPU[][] Ver.1.6
  - CJ2H‐CPU[][]-EIP Ver.1.6
  - CJ2M-CPU[][] Ver.2.2
• Support secure communications via CS1W-EIP21S and CJ1W-EIP21S units.
• Password-protected CX-Programmer project files are available.
• User-created function block files protected with password are available.

Improved functions

• Solved the problem that buffer overflow might occur when opening a project file.
• Solved the problem that memory access violation might occur when opening a project file.

Ver.9.80 : CX-One Version 4 Auto-update (January 2023)

Improved functions

• Solved the problem that CX-Programmer might crash when opening an invalid project file.
• Solved the problem that the warnings about duplicate output use of IR/DR addresses for FB invocation instruction might be displayed.
• Solved the problem that CX-Programmer might fail in reading a variable table or saving a project for a PLC whose network type was set to a gateway PLC.
• Corrected the description errors in the instruction help files.
• Updated the CX-Programmer manuals to the latest versions.
  

Ver.9.79 : CX-One Version 4 Auto-update (October 2022)

Improved functions

• Solved the problem that CX-Programmer might crash when opening an invalid project file.

Ver.9.78 : CX-One Version 4 Auto-update (July 2022)

Improved functions

• Solved the problem that CX-Programmer might crash when opening an invalid project file.
• Solved the problem that an error may not occur even if a period is entered in the FB instance name.

Ver.9.77 : CX-One Version 4 Auto-update (January 2022)

Improved functions

• Solved the problem that program in PLC might corrupt when online edit transferring the task top rungs including the rung comment before the instruction.
• Solved the problem that CX-Programmer might crash when opening an invalid project file.

Ver.9.76 : CX-One Version 4 Auto-update (January 2021)

Improved functions

• Solved the problem that the project file may not be opened when the extended read protection password is registered.

Ver.9.75 : CX-One Version 4 Auto-update (July 2020)

Improved functions

• Corrected misdescriptions in the help file.

Ver.9.74 : CX-One Version 4 Auto-update (January 2020)

Improved functions

• Solved the problem that CX-Programmer might terminate abnormally when Print or Preview menu command was selected for CP2E.

Ver.9.73 : CX-One Version 4 Auto-update (October 2019)

Improved functions

Solved the problem in Ver.9.72 that arithmetic expressions cannot be used as the index of array variables in the ST program.

Ver.9.72 : CX-One Version 4 Auto-update (September 2019)

New functions

• Support the following PLCs.
    CP2E-E[][]DR-A
    CP2E-S[][]D[]-[]
    CP2E-N[][]D[]-[]

Improved functions

• Changed the default PLC.
  When CX-One is installed: CJ1M-CPU11 => CJ2M-CPU11
  When CX-One Lite is installed: CP1L-M => CP2E-S
• Solved the problem that the UM size displayed in the FB Memory view of CP1 might be incorrect when there is an FB definition and no FB instance.
• Solved the problem that an error occurs in the program check for a program with the maximum display capacity in the Memory view, when interrupt tasks and FB definitions are used simultaneously in a PLC with an area for FB only.
• Solved the problem that program errors cannot be detected if an array of variable type index is specified in the DIFU/DIFD instruction operands in the FB ladder.
• Solved the problem that a fatal error might occur in the PLC if a structure BOOL type member is used for the IF statement condition for the FBST program in CJ2H/CJ2M.
• Solved the problem that transferring CP1E programs to CX-Simulator might fail when the programs include interruption tasks.
• Solved the problem that no error is detected in program check even when an array variable without address assignment is used in a ST program/ST action/ST transition.

Ver.9.71 : CX-One Version 4 Auto-update (April 2019)

Improved functions

• Solved the problem that CX-Programmer terminated abnormally or became inoperable when a project with a long project name or a long PLC name was loaded.
• Solved the problem that a fatal error occurred on the PLC after the project was downloaded, becauseDR0+,IR00 that was specified for instruction’s parameter was not detected in error check.
• Solved the problem that timer/counter numbers were determined incorrectly as duplicated with CIO address when the CIO address was specified as automatic allocation area.
• Solved the problem that an error might not be detected in program check even though input condition of the FB instance was not correct.
• Solved the problem that CX-Programmer might terminate abnormally, when a program that included FB instance was uploaded from the PLC.

Ver.9.70 : CX-One Version 4 Auto-update (December 2018)

New functions

• Support the following new models.
  CS1D-CPU[][]HA and CS1D-CPU[][]SA

Improved functions

• Solved the problem that a value (binary) was not displayed correctly in Watch Tab Page if a value of ULINT type variable was &9223372036854775808 or larger.
• Solved the problem that a warning message about constant parameters of floating point calculation instruction was displayed temporarily when the PLC model was changed from CV to CS/CJ/CP.
• Solved the problem that a Transition Ladder program in the Controller did not match with a project on CX-Programmer if a differential type instruction was used in an SFC Transition Ladder program.
• Solved the problem that CX-Programmer terminated abnormally while a project file was being imported.

Ver.9.66 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• The default of information window is changed to be hidden.
• Solved the problem that the CX-Programmer could not be operated when a comment which includes a specific text string was registered.
• Solved the problem that a program that included a function block and refresh output instruction might not be restored correctly on the CX-Programmer, when it was transferred from a PLC.
• Solved the problem that the CX-Programmer might terminate abnormally when loading a CX-Programmer project file (*.cxp/*.cxt).
• Solved the problem that the CX-Programmer might terminate abnormally if the CX-Programmer function block library file (*.cxf) was loaded.

Ver.9.65 : CX-One Version 4 Auto-update (June 2017)

Improved functions

• Solved the problem that CJ1W-ETN21 can not change from ETN11 mode to ETN21 mode when connecting with CJ2 series PLC via EtherNet/IP automatic online.
• Solved the problem that ladder program using function block and address offset array may not be restored correctly, when transfered from PLC.

Ver.9.64 : CX-One Version 4 Auto-update (April 2017)

Improved functions

• Solved the problem that warning message was not displayed when compiling the SFC program with long task name.
• Solved the problem that some programs might not be reflected in the project when uploading after downloading ST / SFC program to which task has not been assigned.
• Solved the problem that if the CX-Programmer is connected with the simulator and a program is transferred to it, comparison result might be “Not matched”.

Ver.9.63 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Solved the problem that making a backup of flash memory might result in a timeout after transferring changes by online edit.
• Solved the problem that an application error might occur when the delete operation was executed for the same comment twice or more in the I/O Comment Edit window.
• Solved the problem that present values of some variables were not displayed in the ST Monitor window.

Ver.9.61 : CX-One Version 4 Auto-update (April 2016)

New functions

• Provided a function to prevent entry of a wrong password by adding a field for entering the password again for confirmation to the PLC Properties window.
• Provided a function to change all input response time settings at the same time in the Unit Settings of PLC System Setup. (CS/CJ-series PLCs)
• Added a message to display cautions when changing the model from CV to CS/CJ.

Improved functions

• Solved the problem that an error occurred when building an FQM1.
• Solved the problem that an error occurred when changing all variables to which addresses are automatically allocated at the same time.
• Solved the problem that an error occurred when copying an item in the Watch Window to a different session of CX-Programmer.
• Solved the problem that operations might become incorrect if an array variable was used in a TIMER instruction in an ST program.
• Solved the problem that an error occurred when a variable starting with DR was specified in data trace operations.
• Solved the problem that operations were disabled when data transfer of a program with extended protection to the simulator started from Windows menu failed.
• Solved the problem that the color of the selected rung element was not displayed correctly in the Ladder Program view.

Ver.9.60 : CX-One Version 4 Auto-update (October 2015)

New functions

• Supports the following versions of the CPU Units.
  CJ2H(-EIP) Ver.1.5
  CJ2M Ver.2.1
  CS1G-H Ver.4.1
  CS1H-H Ver.4.1
  CJ1G-P Ver.4.1
  CS1D-H Ver.1.4
  CS1D-S Ver.2.1
  CP1H-XA Ver.1.3
  CP1H-X Ver.1.3
  CP1H-Y Ver.1.3
  CP1L-M Ver.1.1
  CP1L-L Ver.1.1
  CP1L-EM Ver.1.1
  CP1L-EL Ver.1.1
  CP1E-N Ver.1.3
  CP1E-E Ver.1.3
• Support the extended read protection by password for CJ/CP/CS PLC
• With the newly supported versions of CPU Units, you can extend the read protection password from 8 digits to 16 digits.

Improved functions

• Improved so that asterisks (*) are displayed for the password entered in the PLC Properties dialog box.
• Solved the problem that GPF occurred for CX-Programmer when variables of existing contacts/coils were edited in the Smart Input Mode.
• Solved the problem that the view could not be moved to other pages in the selection list when the priority was given to the addresses in the order of candidate operand display in the Smart Input Mode.
• Solved the problem that unnecessary error information "Error setting default Function Block Instance memory ranges" was displayed on the Transfer tab page in the Output Window when transferring a program including SFC from PLC to PC and the error was disappeared by a program check.
• Solved the problem that GPF might occur for CX-Programmer when the changes of online edit including variable comment changes were applied to a project that includes an unassigned task.
• Solved the problem that replacement results might be wrong if applicable addresses were overlapped in the range-specified replacement.
• Solved the problem that the first dot was changed to a comma when more than one dot was included in an initial value of a STRING variable if decimal point was set to use comma.
• Solved the problem that a message related to the I/O table was displayed when the connection to a PLC was closed while the memory card or other setting view was open.
• Improved so that CX-Programmer is launched by clicking the "Start a Tool" button in the PLC Backup Tool for CJ2M PLC.
• Corrected a wrong description for memory displayed for output bits of CP1H in the help file.
• Solved the problem that the ALT instruction, which is not supported, was hit by the search operation in the CP1E instruction reference file.

Ver.9.54 : CX-One Version 4 Auto-update (April 2015)

Improved functions

• Solved the problem that IME control failed when Smart Input was running on Windows 8.
• Solved the problem that upward differentiation could be set in four SFC task instructions (SFCON, SFCOFF, SFCPR, and SFCPRN).

Ver.9.53 : CX-One Version 4 Auto-update (October 2014)

Improved functions

• Solved the problem that no error might not be detected for STEP variables used in the deleted SFC referenced from a ladder program after deleting the SFC program.
• Solved the problem that the software might be shut down incorrectly when a reserved word that could not be used was entered in the instruction entry dialog box.

Ver.9.52 : CX-One Version 4 Auto-update (June 2014)

Improved functions

• Solved the problem that CX-Programmer may be shut down if the Enter or Break Key was pressed when re-editing a ladder program.
• Solved the problem that automatically-allocated addresses may be duplicated when reallocated if array variables are defined in the auto memory allocation area.
• Solved the problem that variables that were used as array index only in an SFC action program or transition program were deleted when unused variables were deleted.
• Solved the problem that a program check error occurred when the OK Button was clicked after opening the window to edit a STEP variable in an SFC program's local variable table.
• Solved the problem that program checks may not detect an error when a variable was used for an index of sub-structure arrays other than the top-level structure.
• Solved the problem that a compile error could not be detected when the total number of SFC action programs, transition programs, and subcharts exceeded the upper limit.
• Solved the problem that CX-Programmer may be shut down when compiling a subchart.
• Solved the problem that invalid variables were added to a ladder program's local variable table when online editing of an SFC program was canceled.
• Solved the problem that transfer operations may fail when connected with CX-Simulator after changing the device to CJ2H in a program created for CJ2M.

Ver.9.51 : CX-One Version 4 Auto-update (January 2014)

Improved functions

• Improved so that you can narrow down the Controller models on a series-by-series basis when selecting the Controller to connect in the auto online connection (direct connection).
• Improved so that you can select not to display the information window from the next time.

Ver.9.50 : CX-One Version 4 Auto-update (September 2013)

Improved functions

• Solved the problem that array index variables may be changed to 0 by a Compare with PLC operation when they are used in a structure array variable specified as a network variable.
• Solved the problem that condition flags are changed to wrong Input Comparison Instructions when changing the PLC from CV series to CS/CJ series.
• Solved the problem that the same memory may be allocated to a STRING variable and other auto-allocated variable if auto memory allocation is specified for the STRING variable.
• Solved the problem that program check may detect an error when a stack operation is specified for DISTC or COLL instruction.

Ver.9.44 : CX-One Version 4 Auto-update (June 2013)

Improved functions

• Solved the problem that cross reference may not be printed correctly for the programs in Cyclic Task 32 or later.
• Solved the program that CX-Programmer may not respond when pop-up menu is displayed for an FB instance in the variable table for an ST function block.
• Solved the problem that index may change to 0 in the program comparison when a structure array variable that is specified as a network variable is used in an array index.
• Solved the problem that CX-Programmer may be shut down when the Search, Replace, or Change All operation is performed for the variable table immediately after the I/O Comment dialog box or Cross-Reference Report dialog box is closed.
• Solved the program that CX-Programmer may not respond when executing the Model Conversion operation for a program with an annotation or rung comment that ends in the text string ";\".
• Solved the problem that CX-Programmer may be shut down when editing a specific symbol by Smart Input Mode in FB Ladder.
• Solved the problem that File Conversion Utility cannot import the data correctly if a file name includes any spaces in the LSS data file.
• Solved the problem that program check detects an error when using an AVG instruction in block programs.

Ver.9.43 : CX-One Version 4 Auto-update (February 2013)

Improved functions

• Solved the problem that constant operands of MOVB/BCNT/COLL/DIST/XFER instructions are not converted correctly.
• Solved the problem that online connection can be made to other PLC models via an ETN Unit using the CP1L-Ethernet connection.
• Solved the problem that CX-Programmer may be shut down when a special instruction with an empty operand is edited in Smart Input mode.
• Solved the problem that CX-Programmer may be shut down when you set the FB/SFC memory range if the FB/SFC stack setting is changed from the default value.

Ver.9.42 : CX-One Version 4 Auto-update (November 2012)

New functions

• Support the CP1E-E60 CPU Units.
  Support the CP1E-E60SDR-A.

Improved functions

• Improved the problem that it takes a long time to insert/delete rows or columns in rungs during Online Editing.
• Solved the problem that Function Block call instruction disappears when device model is changed to CP1L-L or CP1L-L10.
• Solved the problem that program cannot be restored correctly when transferred from PLC if a symbol is used for a subscript of an auto-allocated TIMER/COUNTER array in an operand.

Ver.9.41 : CX-One Version 4 Auto-update (August 2012)

New functions

• Added [Help | Manual] menu for opening the Operation Manuals.
• Added the new tab in the Output Window for displaying only the compile errors at Compile All PLC Programs.
• Added a function to compare the auto-allocated symbols
  by symbol name at Compare Program.
  

Improved functions

• Solved the problem that takes a long time to upload the program with Network Symbols.
• Solved the problem that the current focus is moved when using the scroll bar in I/O Comment Window or Cross-Reference Report Window.

Ver.9.40 : CX-One Version 4 Auto-update (April 2012)

New functions

• Support the CP1L-EL / -EM CPU Units.
  Support the models CP1L-EL[][][][]-[] and CP1L-EM[][][][]-[].

Improved functions

• Solved the problem that caused an application error when operands which can be used only in NUMBER data type displayed in mnemonic were replaced or changed all.
• Solved the problem that data cannot be transferred correctly when a rung with line comment and a section with the null last line is deleted by Online Editing.

Ver.9.35 : CX-One Version 4 Auto-update (February 2012)

Improved functions

• Solved the problem that prevented operating properties displayed when adding a section on Section/Rung Manager.
• Solved the application error that occurred when an array member of AT specification structure array with a subscript symbol is used in an instruction of FB ladder program.
• Solved the problem that prevented normal operation of programs which used subscript symbols in AT specification structure arrays.
• Improved the process time of [Function Block / SPC Memory Statistics] in programs having structures.
• Improved the error messages shown when you changed set values of binary type timer / counter instructions while CX-Simulator is connected.
• Corrected the different description of C-series PMCR instruction operand names from those on PLC manual.
• Solved the problem that prevented correct restoration of programs which used subscript variables in auto-allocated structure arrays when to Transfer [PLC to PC].

Ver.9.34 : CX-One Version 4 Auto-update (November 2011)

Improved functions

• Improved the time taken to complete displaying the UM memory while structures were used in function blocks.
• Improved the time taken to decompile a program which has function blocks and structures when it was transferred from PLC to PC.
• Improved the time taken to complete changing models for programs in which function blocks and structures were used.
• Solved the problem that some models selected on the PLC Model Selection dialog box to add new PLCs prevented displaying the I/O table.
• Solved the problem that CX-Programmer ended abnormally when a rung header area was selected on a section view while the property dialog box was open.
• Corrected the misdescription about the shortcut key reference.
• Solved the problem that structure symbols were deleted along with deletion of unused symbols.

Ver.9.33 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Solved the problem that displayed the wrong number of used words when a STRING symbol was specified to a FB parameter in a ladder section.
• Solved the problem that prevented using 17 or greater bit sizes for the third operand when a structure symbol was specified for the first operand of the SETA/RSTA instruction.
• Solved the problem that caused an application error when data was added to a null line whose immediate above was a structure member of a FB input-output symbol.
• Solved the problem which prevented specifying a structure member of a subscript symbol to a FB input-output parameter in a task ST.
• Solved the problem that made the address offset operand of a subscript address an illegal operand after a model conversion and transfer from PLC to PC.
• Solved the problem that displayed CIO comments as I/O comments when a timer/counter number was entered to the first operand of a Timer/Counter instruction.
• Improved the time required to copy and paste variables
  including array symbols from Excel to Symbol table.

Ver.9.32 : CX-One Version 4 Auto-update (May 2011)

New functions

• Instructions in Smart Input Mode only can be edited.

Improved functions

• Improved the period to save project files whose FBs are protected, into network drives.
• Solved the problem that caused abnormal shutdown when an unused symbol was deleted.
• Solved a problem with conduction state display. When an operand of a special instruction for output bits is an input or output symbol, the conduction state display does not become active even if the present value of operand address is true.
• Solved the problem about the setting change. While the E10 or subsequent bank is used for FB/SFC memory allocation address, loading a project file changed the setting to the default.

Ver.9.31 : CX-One Version 4 Auto-update (Feburary 2011)

Improved functions

• Solved the problem that caused a compile error on a program which used a line comment or remark.

Ver.9.30 : CX-One Version 4 Auto-update (January 2011)

New functions

[Support of New Types]

• Support the CJ2H Ver.1.4 CPU Units.
  
• On the ST Editor View, you can specify a line number to jump to.
• From the list, you can select and enter functions and symbols that have been registered..
• You can confirm a ST syntax error when it is entered.
• On the FB Ladder View, you can enter in the SMART INPUT mode.
• A popup menu was added to introduce a structure member as the last structure member.

Improved functions

• Solved the problem regarding address offset. Even if an address offset had an illegal data, it did not become an error. But it was transferred to PLC.
• Solved the problem regarding program display. If an address of AT specified FB symbol was the same as an address of a global symbol, a program transferred from PLC->PC was not properly displayed.
• Solved the problem that the size of Line Comment Jump dialog box could not be changed on the Function Ladder View.
• Solved the problem that the information of the Cross Reference popup menu was not updated when the cursor was moved by the arrow keys over the function block symbol table.
• Solved the problem that input strings could not be read while input and output symbols of FB were ON.
• Solved the problem regarding CMP(020) instruction. When a reusable file which had CMP(020) instruction was added to a project, it turned to be an error.
• Can connect with CP1E-N[][] on PLC-PT Integrated Simulation.

Ver.9.21 : CX-One Version 4 Auto-update (November 2010)

Improved functions

• Solved the problem of rung error caused by automatic insertion of vertical connecting line. The error occurred when an instruction was added while the option to validate inserting of connecting line is available.
• Solved the problem which prevented opening a project file. When a project file to which automatic memory allocation was set was saved by CX-Programmer V9.20, it cannot be opened by V9.12 or earlier versions.

Ver.9.20 : CX-One Version 4 Auto-update (October 2010)

New functions

• Can use structure symbols in ST.
• Can use timer and counter symbols in ST.
• Can use the following ten functions in ST:
  MOD (remainder), SHL (left bit shift), SHR (right bit shift), ROL (left bit rotation), ROR (right bit rotation), LIMIT (upper and lower limit control), SEL (data selection), MUX (data extraction), MAX (max search) and MIN (min search).
• Can copy and paste structure symbols to CX-Designer (V3.20 and higher). (CJ2 PLC)

Improved functions

• Solved the problem that prevented cursor movement after using the F3 key for continuous searches.
• Solved the problem that caused a program error on PLC when the SETB instruction was used in FB ladder program and the program was transferred to PLC.
• Solved the problem that caused GPF at existing CX-Programmer when a project to which automatic memmory allocation was set.

Ver.9.12 : CX-One Version 4 Auto-update (July 2010)

New functions

[Support of New Types]

• Support CJ2M Ver.2.0 CPU Units.
• Support CJ2M Pulse I/O Modules.
  Support CJ2M-MD211 and -MD212.
• Support Ethernet communications to CP1E-series PLCs by using CP1W-CIF41 Option Boards.

Improved functions

• Solved the problem that an error occurred at loading files if a SFC STEP flag (.x) was used as the FB input parameter.
• Solved the problem that the Address Offset operand was not properly updated when the Transfer [PC -> PLC] was executed after a model conversion.
• Solved the problem that an application error occurred when a structure symbol was selected on the ladder view and copied and pasted to the Watch Window.

Ver.9.11 : CX-One Version 4 Auto-update (April 2010)

Improved functions

• Enable to select the function to insert a null line under the selected rung automatically.
• Enable to select the function to insert a connecting line automatically when an instruction is added or deleted.
• Solved the problem that the rung data having the DIFU/DIFD instructions did not show on the Address Reference Tool window.
• Solved the problem of jumping from the Address Reference Tool window to one line under the target.
• Solved the problem that a ladder having a linefeed code in an I/O comment could not be printed by layout printing on a CJ2-series Unit.
• Solved the problem that the timer did not show on the Detailed usage, when you specified it by its number in the NUMBER data type.
  

Ver.9.10 : CX-One Version 4 Auto-update (February 2010)

New functions

• Can connect to CP1E-series CPU Units via SYSWAY.

[Support of New Models]

• Supports CP1E CPU Units.
  Supports models CP1E-E10, -E14, -N14, and -N60.
• Supports CJ2M CPU Units.
  Supports models CJ2M-CPU[][].
• Supports CJ2H Ver.1.3 CPU Units.

Improved functions

• Can display structure array symbols as candidate operands for ladder instructions.
• Solved the problem that counter and timer comments of CP1E ladder programs. were not printed.
• Solved the problem in function block arguments. Proper execution was sometimes prevented when an arithmetic expression was used in a function block argument within a ST task.
• Solved the problem that I/O comments might be deleted if the addresses before and after a replacement overlapped in Replace or Change All.
• Solved the problem in Replace. When the software was first stared up after upgrading, replacements might fail even the target options were properly selected.

Ver.9.04 : Version V4.* → CX-One Version 4 Auto-update (December 2009)

New functions

• Configuration software for CJ1W-NC[][]4 PCU Unit has the function to preview the memory operation data.
• Can connect to CJ2H CPU Units via SYSWAY.

[Support of New Types]

• Supports CP1E CPU Units.
  Supports model CP1E-NA.

[Enhanced Function by Smart Input Mode]

• Can finalize all entries by pressing Shift and Enter keys together.
• Can enter the same instruction consecutively by pressing Ctrl and Enter keys together.
• Can show the address increment candidates for each area type.
• Can analyze the operand data of instruction that is used in plural locations of a single circuit, and show the candidates.
• Up and down arrow keys can increment and decrement address values that are specified by instruction operands.

Improved functions

• Solved the problem in CJ1W-ETN21 and CS1W-ETN21 CPU Bus Units that could not properly show and verify the parameters.
• Improved the function that trace result graphs can be zoomed in and out in Data Trace Function.
• Solved the problem that could not print the title column with Windows Vista.
• Solved the problem that FB might be changed into another instance by program downloading, when CIO array symbols are used.

Ver.9.02 : Version V4.* → CX-One Version 4 Auto-update (August 2009)

Improved functions

• Imporved the performance in time required to have the Auto Online Connection to the NV-series host PLC.

Change history of SwitchBoxUtility

Ver.1.70 : CX-One Version 4 Auto-update (September 2019)

New functions

• Support the following PLCs.
    CP2E-E[][]DR-A
    CP2E-S[][]D[]-[]
    CP2E-N[][]D[]-[]

Ver.1.69 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• Solved the problem that Switch Box Utility might terminate abnormally when the Switch Box Utility address file (*.sba) was loaded.

Ver.1.68 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Changed the help file format from HLP to CHM.

Change history of CX-Integrator

Ver.2.70 : CX-One Version 4 Auto-update (January 2024)

New functions

• Support the RCJ1W-DRM21 DeviceNet Master Unit.

Ver.2.69 : CX-One Version 4 Auto-update (July 2023)

Improved functions

• Solved the problem that some security software prevented normal operation.

Ver.2.68 : CX-One Version 4 Auto-update (Apr 2020)

Improved functions

• Improved some behaviors of Sysmac Studio for each model.

Ver.2.67 : CX-One Version 4 Auto-update (September 2019)

New functions

• Support the following PLCs.
    CP2E-N[][]D[]-[]

Improved functions

• Solved the problem that CX-Integrator might terminate abnormally when device parameters of the EJ1N-HFUB-DRT are copied.

Ver.2.66 : CX-One Version 4 Auto-update (December 2018)

New functions

• Support the following new models.
  CS1D-CPU[][]HA and CS1D-CPU[][]SA

Ver.2.65 : CX-One Version 4 Auto-update (July 2018)

New functions

• Support the new Sysmac Studio Edition.

Ver.2.64 : CX-One Version 4 Auto-update (October 2017)

New functions

• Supports NJ Series Controller version 1.16.

Ver.2.63 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Solved the problem that a shortcut to the Windows Start menu might be created in an unintended location.

Ver.2.61 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Solved the problem that caused GPF.

Ver.2.60 : CX-One Version 4 Auto-update (April 2015)

New functions

• Support the NJ101 CPU Units Ver. 1.10.

Ver.2.59 : CX-One Version 4 Auto-update (January 2014)

Improved functions

• Solved the problem that error logs of CS1W-DRM21-V1 were not displayed correctly.
• Corrected the terms on the DeviceNet parameter edit view.

Ver.2.58 : CX-One Version 4 Auto-update (June 2013)

New functions

• Support the KE1-DRT-FLK Smart Monitoring Device DeviceNet Communication Unit.

Improved functions

• Solved the problem that "Designation of 62 nodes" is not displayed for ***_CLK23 Controller Link Units in the diagnosis of settings by the Controller Link Network Diagnostic Tool.

Ver.2.57 : CX-One Version 4 Auto-update (February 2013)

Improved functions

• Improved the link-off problem in the help file.

Ver.2.56 : CX-One Version 4 Auto-update (November 2012)

Improved functions

• Solved the problem that GRT1-DRT(DeviceNet) does not work on Windows 7 or Vista.

Ver.2.55 : CX-One Version 4 Auto-update (August 2012)

New functions

• Support the DeviceNet communication unit for RX series inverter : Model 3G3AX-RX-DRT-E.

Ver.2.53 : CX-One Version 4 Auto-update (April 2012)

Improved functions

• Support the CP1L-EL / -EM CPU Units.
  Support the models CP1L-EL[][][][]-[] and CP1L-EM[][][][]-[].

Ver.2.52 : CX-One Version 4 Auto-update (February 2012)

Improved functions

• Solved the problem that writing of serial No. is not sometimes finished on WD30-ME-V1.

Ver.2.51 : CX-One Version 4 Auto-update (November 2011)

New functions

• Support the CompoNet communication unit for MX2 series inverter : Model 3G3AX-MX2-CRT-E

Improved functions

• Improved the Warning message on unsupported devices.

Ver.2.50 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Improved the description of Auto Online Dialogue Box.

Ver.2.44 : CX-One Version 4 Auto-update (May 2011)

New functions

[Support of New Type]

• Support the Model R88A-NCW152-DRT CIP Revision 2.x devices.

Ver.2.43 : CX-One Version 4 Auto-update (October 2010)

Improved functions

• Updated the device vender name displayed in the DeviceNet Component list.

Ver.2.42 : CX-One Version 4 Auto-update (February 2010)

New functions

[Support of New Models]

• Supports CJ2M CPU Units.
  Supports models CJ2M-CPU[][].

Ver.2.41 : Version V4.* → CX-One Version 4 Auto-update (October 2009)

Improved functions

• Solved the problem that you can not start CX-Integrator when the latest version of CX-ConfiguratorFDT is installed .

Change history of CX-Protocol

Ver.2.03 : CX-One Version 4 Auto-update (January 2021)

Improved functions

• Solved the problem that the CX-Protocol might terminate abnormally when a CX-Protocol project file (*.psw) was loaded.

Ver.2.02 : CX-One Version 4 Auto-update (July 2020)

Improved functions

• Solved the problem in specific PC environments, part of character strings on the display would not be properly displayed.

Ver.2.01 : CX-One Version 4 Auto-update (January 2019)

Improved functions

• Solved the problem that memory leak might occur when the project file could not be loaded.

Ver.2.00 : CX-One Version 4 Auto-update (December 2018)

New functions

• Support the following new models.
  CS1D-CPU[][]HA and CS1D-CPU[][]SA

Ver.1.993 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• Solved the problem that the CX-Protocol might terminate abnormally when a CX-Protocol project file (*.psw) was loaded.

Ver.1.992 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Solved the problem that a shortcut to the Windows Start menu might be created in an unintended location.

Ver.1.991 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Changed the help file format from HLP to CHM.

Ver.1.99 : CX-One Version 4 Auto-update (April 2015)

New functions

• Support the CJ1W SCU Units mounted on NJ1 Controllers.

Ver.1.98 : CX-One Version 4 Auto-update (June 2014)

Improved functions

• Solved the problem that CX-Protocol can't connect with some controllers on Windows 8 environment.

Ver.1.97 : CX-One Version 4 Auto-update (February 2013)

Improved functions

• Improved the link-off problem in the help file.

Ver.1.96 : CX-One Version 4 Auto-update (August 2012)

New functions

• Support the models CJ1W-SCU22, -SCU32 and -SCU42 Unit Ver.2.1.

Ver.1.95 : CX-One Version 4 Auto-update (February 2012)

Improved functions

• Revised the operation manual.

Ver.1.94 : CX-One Version 4 Auto-update (November 2011)

Improved functions

• Improved the problem that in some installation conditions unnecessary messages were shown at startup.

Ver.1.93 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Improved the link-off problem in the help file.

Ver.1.92 : CX-One Version 4 Auto-update (February 2010)

New functions

[Support of New Models]

• Supports CJ2M CPU Units.
  Supports models CJ2M-CPU[][].

Change history of CX-Simulator

Ver.2.03 : CX-One Version 4 Auto-update (July 2023)

New functions

• Supports the following versions of the CPU Units.
  - CJ2H-CPU[][] Ver.1.6
  - CJ2H‐CPU[][]-EIP Ver.1.6
  - CJ2M-CPU[][] Ver.2.2

Ver.2.02 : CX-One Version 4 Auto-update (January 2023)

Improved functions

• Solved the problem where CP1E/CP2E scheduled interrupt tasks might not run at specified intervals.
• Solved the problem that the EM area of CJ2 series PLC could not be selected on the memory card component.
• Fixed spelling errors in the English menus.

Ver.2.01 : CX-One Version 4 Auto-update (September 2019)

New functions

• Support the following PLCs.
    CP2E-E[][]DR-A
    CP2E-S[][]D[]-[]
    CP2E-N[][]D[]-[]

Ver.2.00 : CX-One Version 4 Auto-update (December 2018)

New functions

• Support the following new models.
  CS1D-CPU[][]HA and CS1D-CPU[][]SA

Improved functions

• Solved the problem that a communication error occurred when a CMND2 instruction was executed.

Ver.1.998 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Solved the problem that data could not be collected from some models using Multipoint Data Collection Tool.

Ver.1.997 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Changed the help file format from HLP to CHM.

Ver.1.996 : CX-One Version 4 Auto-update (October 2015)

New functions

• Supports the following versions of the CPU Units.
  CJ2H(-EIP) Ver.1.5
  CJ2M Ver.2.1
  CS1G-H Ver.4.1
  CS1H-H Ver.4.1
  CJ1G-P Ver.4.1
  CS1D-H Ver.1.4
  CS1D-S Ver.2.1
  CP1H-XA Ver.1.3
  CP1H-X Ver.1.3
  CP1H-Y Ver.1.3
  CP1L-M Ver.1.1
  CP1L-L Ver.1.1
  CP1L-EM Ver.1.1
  CP1L-EL Ver.1.1
  CP1E-N Ver.1.3
  CP1E-E Ver.1.3

Ver.1.995 : CX-One Version 4 Auto-update (October 2014)

Improved functions

• Solved the problem that EM bank data might not be transferred between the memory card and I/O memory in CJ2H and CJ2M.

Ver.1.994 : CX-One Version 4 Auto-update (September 2013)

Improved functions

• Solved the problem that the Simulator cannot connect with a CP1E-NA.

Ver.1.993 : CX-One Version 4 Auto-update (November 2012)

New functions

• Support the CP1E-E60 CPU Units.
  Support the CP1E-E60SDR-A.

Ver.1.992 : CX-One Version 4 Auto-update (August 2012)

Improved functions

• Solved the problem that DMPX Instruction may be executed in spite of an error flag is ON.

Ver.1.991 : CX-One Version 4 Auto-update (April 2012)

Improved functions

• Support the CP1L-EL / -EM CPU Units.
  Support the models CP1L-EL[][][][]-[] and CP1L-EM[][][][]-[].

Ver.1.99 : CX-One Version 4 Auto-update (January 2011)

Improved functions

• Solved the problem that SFT instruction did not operate properly in a certain address.

Ver.1.98 : CX-One Version 4 Auto-update (October 2010)

Improved functions

• Solved the problem that could not display present values correctly on a program that uses function block input and output symbols.

Ver.1.97 : CX-One Version 4 Auto-update (July 2010)

New functions

[Support of New Types]

• Support CJ2M Ver.2.0 CPU Units.
  
• Support forced sets and resets to EM bit addresses specified by banks, which were used by CJ2H and CJ2M.

Improved functions

• Solved the problem that the present values of FB symbols whose defaults were set cannot be changed.

Ver.1.96 : CX-One Version 4 Auto-update (April 2010)

Improved functions

• Solved the problem that the ladders using the function blocks on CJ2M could not be transferred due to the capacity limit.

Ver.1.95 : CX-One Version 4 Auto-update (February 2010)

New functions

[Support of New Models]

• Supports CJ2M CPU Units.
  Supports models CJ2M-CPU[][].

Ver.1.94 : Version V4.* → CX-One Version 4 Auto-update (December 2009)

New functions

[Support of New Types]

• Supports CP1E CPU Units.
  Supports models CP1E-NA.

Change history of CX-Position

Ver.2.54 : CX-One Version 4 Auto-update (July 2021)

Improved functions

• Solved the problem that CX-Position fails to compare data with NC unit.

Ver.2.53 : CX-One Version 4 Auto-update (January 2021)

Improved functions

• Solved the problem that the CX-Position might terminate abnormally when a CX-Position project file (*.nci) was loaded.

Ver.2.52 : CX-One Version 4 Auto-update (April 2015)

New functions

• Support the transfer/verification functions for multiple Units.

Change history of CX-Motion-NCF

Ver.1.94 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Improved the connectivity with some units.

Ver.1.93 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Solved the problem that FINS network address and FINS node address are not updated after changing the network type.

Ver.1.92 : CX-One Version 4 Auto-update (July 2010)

Improved functions

• Improved the displayed servo parameter number and input/output signal setting of G5 series servo drive.

Change history of CX-Motion-MCH

Ver.2.33 : CX-One Version 4 Auto-update (January 2023)

Improved functions

• Solved the problem that CX-Motion-MCH might incorrectly terminate when opening a project file.

Ver.2.32 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Solved the problem that "match" parameters were displayed as "not match" in the comparison results of servo parameters.

Ver.2.31 : CX-One Version 4 Auto-update (May 2016)

Improved functions

• Solved the problem that the Write to Flash Memory function did not work if Compare the MC Unit and the Servo Drive before the transfer was selected when transferring servo parameters or motor parameters to an MC unit.
• Solved the problem that the comparison results became "different" when servo parameters were compared between a servo drive and CX-Motion-MCH even if their values were same.

Ver.2.29 : CX-One Version 4 Auto-update (June 2014)

Improved functions

• Solved the problem that servo parameters with negative set values may not be transferred normally when transferred from the Servo.

Ver.2.28 : CX-One Version 4 Auto-update (September 2013)

Improved functions

• Solved the problem that servo parameters are initialized when compared.

Ver.2.27 : CX-One Version 4 Auto-update (June 2013)

Improved functions

• Solved the program that servo parameter setting values may not be restored correctly when a project file is opened or servo parameters are transferred from an MC Unit or Servo Drive.

Ver.2.26 : CX-One Version 4 Auto-update (November 2012)

Improved functions

• Solved the problem that the project files created by Japanese-version CX-Motion-MCH may not be retrived by the English-version CX-Motion-MCH.
• Solved the problem that servo/motor model information may be changed if the project is transferred to MC Unit without servo parameters and then transferred from the MC Unit to the CX-Motion-MCH.

Ver.2.25 : CX-One Version 4 Auto-update (July 2010)

Improved functions

• Solved the problem that CX-Motion-MCH crashes if multi-byte charactor is in motion programs except comment part.

Change history of CX-Motion

Ver.2.39.120 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Solved the problem that the Project workspace was not displayed correctly in some Touch Panel Windows systems.

Ver.2.39 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Improved the link-off problem in the help file.

Ver.2.38 : CX-One Version 4 Auto-update (February 2013)

Improved functions

• Solved the problem that ABS (R88D-G) type cannot be set in Coordinate Parameters.

Ver.2.37 : CX-One Version 4 Auto-update (November 2011)

New functions

• Improved the function that capital letters in project file name are kept when overwriting the project file.

Improved functions

• Solved the problem that the setting value is changed when going back from print dialog.

Change history of CX-Drive

Ver.3.04 : CX-One Version 4 Auto-update (October 2024)

Improved functions

• Solved the problem in compatibility from MX2-series V1 Type Inverters to V2 Type.

Ver.3.03 : CX-One Version 4 Auto-update (July 2024)

New functions

• Support 3G3MX2-V2 Inverters.

Improved functions

• Solved the problem that could prevent an online connection to a 3G3RX Inverter.

Ver.3.02 : CX-One Version 4 Auto-update (July 2023)

New functions

• Support 3G3MX2-V2 inverters.

Ver.3.01 : CX-One Version 4 Auto-update (January 2023)

Improved functions

• Improved the display of 3G3RX2 Inverters' parameters.

Ver.3.00 : CX-One Version 4 Auto-update (January 2019)

New functions

• Support the new inverter 3G3RX2-series which will be released soon.

Ver.2.95 : CX-One Version 4 Auto-update (October 2015)

New functions

• Support 3G3MX2 firmware version 46734881 and 46734926.
  

Improved functions

• Most Recent Used Files (MRU) menu list appears corrupted when the file path includes multi-byte character set.
• Alarm 95 is described as 'Encoder Communications Warning' instead of 'Command Warning' for G5-Series
• Updated PL2303 driver (USB to Serial Port Converter) to version 1.9.0

Ver.2.94 : CX-One Version 4 Auto-update (June 2014)

New functions

• Support 3G3MX2-[][][]-HF inverters.

Ver.2.93 : CX-One Version 4 Auto-update (January 2014)

Improved functions

• Added a new function to save all files under a specified name (Save All As).
• Solve the problem that 32-bit signals are incorrectly rounded down in Data Trace graph for G5-Series.
• Solve the problem that online connection fails for R88D-WT with firmware version 17 or earlier.

Ver.2.92 : CX-One Version 4 Auto-update (September 2013)

New functions

• Support High Frequency Mode of inverter MX2-V1 series.

Ver.2.90 : CX-One Version 4 Auto-update (June 2013)

New functions

• Added the motor types that can be selected in the motor setting function of G5-series Servo Drives (Linear motor type).

Improved functions

• Solved the problem that parameter transfer fails for G5-series Servo Drives when a negative value is set in the USB connection.
• Solved the problem that d013 value cannot be displayed correctly for JX-series Inverters.

Ver.2.81 : CX-One Version 4 Auto-update (February 2013)

New functions

• Support the MX2-V1 inverters.
• Support the Drive Programming function of MX2-V1 inverters.

Ver.2.74 : CX-One Version 4 Auto-update (October 2012)

Improved functions

• Solved the problem that wrong values may be set for initial values and ranges of parameters which are related to rated current for unit version 1.0 of MX2-series inverters.

Ver.2.72 : CX-One Version 4 Auto-update (August 2012)

New functions

• Support the Drive Programming function of RX-V1 inverter.

Improved functions

• Solved the problem that the cursor value is not displayed when only the vertical axis cursor is read in data tracing and realtime tracing.
• Solved the problem that the values may be changed after saving and opening data trace results of G5 series.

Ver.2.71 : CX-One Version 4 Auto-update (May 2012)

Improved functions

• Solved the problem that CX-Drive crashes when opening review file of data trace, real time trace and FFT (extension of the file is *.sdm) if the drive is G5 series with built-in MECHATROLINK-II communication type.
• Solved the problem that zooming Y-axis of data trace cannot work correctly.

Ver.2.70 : CX-One Version 4 Auto-update (April 2012)

New functions

• Support G5-series Servo Drive (with Built-in EtherCAT Communications Linear Motor Type) Ver1.1 to be released soon.
• Support 3G3RX-series Inverters (with Built-in EtherCAT Communications Option Boards) to be released soon.

Improved functions

• Solved the problem that the value of torque demand in real time trace is incorrect if the servo is G5-series with Built-in EtherCAT Communications Type.
• Solved the problem that the output signals is not displayed correctly in data trace if the servo is is G5-series with Built-in EtherCAT Communications Type.
• Solved the problem that the unit of acceleration/deceleration time is incorrect for the test run function of G5-series Servo Drives.
• Solved the problem that SMARTSTEP A-series 100V type is detected as 200V type.
• Solved the problem that date, time and page number is not printed when printing parameters.

Ver.2.60 : CX-One Version 4 Auto-update (November 2011)

New functions

• Support RX inverters 3G3RX-V1 to be released soon.
• Added easy parameter setup function in G5 servo drives.
• Added via DeviceNet and via CompoNet connection of MX2 inverters and RX inverters to be released soon.

Improved functions

• Solved the problem that connecting to drives is failed after conversion to G5 servo drives or MX2 inverters.
• Solved the problem that default value of G5 series servo drives (R88D-KT) is incorrect.
• Solved the problem that connecting to drives is failed after opening file if the drive is W series servo drive or SMARTSTEP A series servo drive.

Ver.2.52 : CX-One Version 4 Auto-update (September 2011)

Improved functions

• Solved the problem that CX-Drive V2.51 automatically transfers electronic gear parameters from servo dirve when go online if the servo is W series(model: R88D-WT) or SMARTSTEP A series(model: R7D-AP).

Ver.2.51 : CX-One Version 4 Auto-update (August 2011)

New functions

• Added test run function for 3G3MX2 inverter via EtherCAT

Improved functions

• Solved the problem that text of alarm concurrent bits of R88D-KN-ECT are wrong

Ver.2.40 : CX-One Version 4 Auto-update (May 2011)

New functions

[Support of New Type]

• Support the G5-sereis Servo Drive (EtherCAT communication type R88D-KN[]-ECT Ver.2.1) which would be released shortly.
  
• Added test run function of MX2 inverter.
• Added parameter conversion function for
  3G3JV -> 3G3JX
  3G3MV -> 3G3MX2
  R88D-WT -> R88D-KT
  R88D-WT -> R88D-KN
  R88D-WN -> R88D-KN

Improved functions

• Solved the problem that CX-Drive cannot communicate 3G3RX 3.7kW type.

Ver.2.31 : CX-One Version 4 Auto-update (Feburary 2011)

Improved functions

• Solved the problem that CX-Drive crashes when closing the review file (file extension: sdm).

Ver.2.30 : CX-One Version 4 Auto-update (January 2011)

New functions

• Added the damping control function of G5-series servo drives.

Ver.2.20 : CX-One Version 4 Auto-update (October 2010)

New functions

[Support of New Type]

• Support the G5-series Servo Drive (EtherCAT communication type R88D-KN[]-ECT (the model without "-R")) which would be released shortly. On CX-Drive, the model R88D-KN[]-ECT-R is described as Ver.1.0 while the model R88D-KN[]-ECT (the model without "-R") as Ver.2.0.
• Support 3G3MX2 DeviceNet option board interface(3G3AX-MX2-DRT).

Improved functions

• Improved the parameter transferring speed for G5 servo driver(R88D-KN[]-ECT Ver.2.0 or later).

Ver.2.10 : CX-One Version 4 Auto-update (July 2010)

New functions

[Support of New Types]

• Support the large capacity of G5-series Servo Drive "EtherCAT communication type".
• Support 3G3MX2 EtherCAT Option Boards.
  Support the model 3G3AX-MX2-ECT.
  
• Support the function Autotuning wizard which can make the servo gain tuning easier.

Ver.1.92 : CX-One Version 4 Auto-update (April 2010)

New functions

[Support of New Types]

• Support G5-series Servo Drive "EtherCAT communication type".
  Support models R88D-KN[][][]-ECT-R.

Ver.1.91 : CX-One Version 4 Auto-update (February 2010)

Improved functions

• Solved the problem that the mistake of displayed data in trigger of data trace window.

Ver.1.91 : Version V4.* → CX-One Version 4 Auto-update (October 2009)

New functions

• Supports the G5-series Servomotor/Servo Drives with built-in MECHATROLINK-II communications.

Ver.1.90 : Version V4.* → CX-One Version 4 Auto-update (August 2009)

New functions

• Supporting inverter MX2.

Improved functions

• Solved the problem that a part of parameters was unable to transfer to the JX/RX-series Inverters.

Change history of CX-Designer

Ver.3.75 : CX-One Version 4 Auto-update (October 2023)

Improved functions

• Solved the problem that CX-Designer might terminate abnormally when a different project was opened without exiting CX-Designer.

Ver.3.74 : CX-One Version 4 Auto-update (January 2021)

Improved functions

• Solved the problem regarding the test function that a graph was not displayed normally when the data with 2-word or longer length was read through a batch readout of line graphs.

Ver.3.73 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• Solved the problem that an error might continue occurring when a test was performed with a project that utilizes the SAP.

Ver.3.72 : CX-One Version 4 Auto-update (October 2017)

Improved functions

• [Test function] Solved the problem that the CX-Designer might freeze when operating the button that switches the display of Alarm/Event Summary & History.
• [Test function] Solved the problem that alarms and events are not displayed correctly after clearing the alarms and events on the Alarm/Event Summary & History functional objects.
• [Test function] When Alarm/Event Summary & History is displayed in the order of frequency of occurrence, and the records of alarm/event are cleared twice or more times, the object can not record alarms/events up to the maximum record number.
• [Test function] Solved the problem that the CX-Designer terminates abnormally, if it displays a screen with a large number of broken line graphs.
• [Test function] Solved the problem that screen switching is not executed depending on the timing when switch screen is speficied in the Alarm/Event Setting.

Ver.3.71 : CX-One Version 4 Auto-update (April 2017)

New functions

• Import function of the former library supports Windows10 now.

Improved functions

• Unnecessary settings appeared on the Alarm settings are deleted now.
• Uploading a project from the NS unit system version 1.[][] is enabled now.
• The unnecessary error message no longer appears when the project with the data transfer security is uploaded.

Ver.3.700 : CX-One Version 4 Auto-update (October 2016)

New functions

• Support NX1P2-[][][][].

Improved functions

• Solved the problem that made the double quotations, which were included in the name of an event as the reuse source, increase at the time of reuse in the troubleshooter setting.
• Solved the problem that prevented the page ID which was specified for a multi-function object from being correctly detected in the error-check function.
• Solved the problem that, in cases where a macro was included in the action items for a multi-function object, kept reordering from being normally conducted in some occasions.
• Solved the problem that did not reflect in the cross reference an indirectly specified address for flicker setting in some cases.
• Solved the problem that did not normally record the operation log for an object on a sheet in the test function.
• Solved the problem that verified tags with the host that did not use tags in the test function.

Ver.3.690 : CX-One Version 4 Auto-update (April 2016)

New functions

• Support the Modbus TCP.

Improved functions

• Solved the problem that causes an error when a project with the size of more than 30MB is uploaded via USB.
• Support the reuse in cases where the array definitions differ between source and destination of reuse.
• Solved the problem that triggers an invalid behavior when running a macro immediately after executing a key button such as a multifunction object in the test mode.
• Solved the problem that, while attempting to import variables from Sysmac Studio, allows import of the variables which are not supposed to be registered in CX-Designer.

Ver.3.660 : CX-One Version 4 Auto-update (July 2015)

Improved functions

• Solved the problem that if you select indirect address reference to specify the maximum or minimum value for a Numeral Display & Input object or a Thumbwheel Switch object, the settings may be changed to invalid ones when the project is saved.
• Solved the problem that the variable changes to invalid one when the object to which the array is assigned is reused in the destination project if the number of elements of an array is different between source and destination projects.

Ver.3.650 : CX-One Version 4 Auto-update (May 2015)

Improved functions

• Coped with the problem that an indirectly designated address may change to an invalid one on saving the project when specifying an upper/lower limit value for a numerical value display/input part or a thumbwheel part.

Ver.3.640 : CX-One Version 4 Auto-update (April 2015)

New functions

• Support the method to specify differences from the present value in the settings of maximum and minimum values for Numeral Display & Input component and Thumbwheel Switch component.
• Support the indirect specification of password.

Improved functions

• Solved the problem that source code of macros might become invisible.
  

Ver.3.600 : CX-One Version 4 Auto-update (October 2014)

Improved functions

• Solved the problem that the test function might not operate correctly in the projects where many tags were used in more than one host.
• Solved the problem that the software might be shut down due to an error during the library operations.
• Solved the problem that the table parts might be unintentionally flipped vertically when editing the table parts.
• Solved the problem that the alarm export function did not operate correctly in the project version 8.7.
• Solved the problem that the system memory list was not displayed correctly in the project version 8.7.
• Solved the problem that yen mark was displayed for backslash in the Macro Editor.
• Solved the problem the property dialog box of SAP was not displayed correctly on Windows 8.
• Solved the problem that system memory did not operate correctly when an alarm was cleared while the test function was used.

Ver.3.590 : CX-One Version 4 Auto-update (June 2014)

New functions

• Support that GETNUMVAL can operate with "Before Inputting Numeral".

Ver.3.570 : CX-One Version 4 Auto-update (March 2014)

New functions

• Support copy and paste functions of Edit Properties.

Improved functions

• Support the problem that an error may occur when editing Table component.
• Support the problem that a Macro accesses the same address with the original component's address when repeating with offset.
• Support the problem that invalid font size may be assigned when font size is modified in a property list.
• Support the problem that transferring is unavailable for a part of system version of the NS series.
• Support the problem that multitransfer importing does not operate normally.

Ver.3.560 : CX-One Version 4 Auto-update (January 2014)

New functions

• Support the Tag replacement in Replacement function.
• Support offset processing of structure type array in Repeat function.

Ver.3.550 : CX-One Version 4 Auto-update (September 2013)

New functions

• Improved that the progress will be displayed when deleting the variables.
• Support the function that NS unit displays a warning when the system version other than specified is on the unit during transmitting the project.
• Improved that focus position will not be moved when the name of the variable is modified in variable table or other.
• Support the function that the type String and array can be newly created.
• Improved that the layout of list edition will be retained.
• Improved the function that a warning will be skipped to continue transferring data when transferring collectively.
• Improved that the settings of collective transferring can be done on UI.
• Improved that the result of transferring will be displayed on UI when transferring collectively.

Improved functions

• Improved the problem that using a tag for READCMEM in test function intervenes the operating normally.
• Improved the problem that integrated simulation may not start-up normally in the project using tag.
• Improved the problem that the settings of the font result in incorrect in the project of multiple labels when the library is reused.

Ver.3.540 : CX-One Version 4 Auto-update (June 2013)

Improved functions

• Deleted unnecessary settings from Transfer Setting.
• Support the function that the user can select the conventional mode when uploading the project.
• Support to modify the number of elements in STRING type.
• Improved the performance during pasting the variables.
• Solved the problem that a part of the display goes black on Windows 7.
• Solved the problem that the Alarm/Event Display components are overlapped in test function when the system language is set in the languages other than Japanese or English.
• Solved the problem that the endian of the text string cannot be the same as the one of NS Unit when the user operates the integrated simulation with NJ.

Ver.3.520 : CX-One Version 4 Auto-update (February 2013)

Improved functions

• Solved the problem that CX-Designer Introduction Guide had an error in writing.

Ver.3.520 : CX-One Version 4 Auto-update (November 2012)

Improved functions

• Solved the problem that the device template for E5*C/N may not work properly.
• Solved the problem that Help had an error in writing.

Ver.3.510 : CX-One Version 4 Auto-update (September 2012)

Improved functions

• The performance of pasting the variables onto the variables table has been improved.
• Solved the problem that cannot set the storage format properly on the project V8.5 or later versions when CX-Designer is installed in Chinese (Simplified characters).
• Solved the problem that the integrated simulation with Sysmac Studio often cannot start up when using the project load macro.
• Solved the problem that unnecessary line break which occurs when an alarm/event history is saved through the test function.
• Solved the problem that cannot display the specific character on the keypad through the test function.

Ver.3.500 : CX-One Version 4 Auto-update (August 2012)

Improved functions

• Added the Palette function.
• Made an improvement so that the number of array elements can be changed.
• Added the verification function.
• Added the batch transfer function.
• Added the function to have the transfer setting per project.

Ver.3.411 : CX-One Version 4 Auto-update (April 2012)

Improved functions

• Support the function to prohibit entering bar codes when the input pad is used.
• Enhanced checking host names for the line boundary character rules.

Ver.3.40 : CX-One Version 4 Auto-update (February 2012)

New functions

• Support the setting that improved the communications performance with Mitsubishi Q/QnA-series PLC.

Improved functions

• Solved the problem that cleared a part of addresses of Temperature Controller used in project macro.

Ver.3.303 : CX-One Version 4 Auto-update (November 2011)

New functions

• Support the function to check inconsistency between macro sources and binary codes.

Improved functions

• Solved the occasional problem which suspended screen transfer to NS via USB.
• Solved the problem which prevented rebuilding macro when addresses were replaced from symbol tables while the screen was closed.
• Solved the problem which caused error ends when a symbol table included unnecessary data.
• Solved the problem that the default gateway value was also displayed on proxy when the Ethernet setting screen was opened for communications setting.
• Solved the problem that normal processes were prevented when BCD type was assigned to option values on the pop-up menu for Multifunction objects in the test function.
• Improved the problem that exiting the communications setting was always slow.

Ver.3.30 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Solved the problem where the mouse coordinate display disappeared on Windows 7.
• Solved the problem where the host name in the macro changed to $W0 when an object to which a macro such as WRITEHOSTB was copied and pasted.

Ver.3.24 : CX-One Version 4 Auto-update (May 2011)

Improved functions

• Solved the problem that occurred when a password was entered in the Test function on a keypad which was made by a user for password entry.

Ver.3.23 : CX-One Version 4 Auto-update (January 2011)

Improved functions

• Improved compatibility between RTF files and Microsoft Word files. The RFT files are the ones printed out when the Files are selected as the print output destination.
• Improved the address replacement performance.
• Solved the problem which caused abnormal terminations when a validation is executed.
• Solved the problem about display. When a BMP file was specified to a functional object
• Solved the problem in reconstruction of DB. The DB was reconstructed every time a project of version7.1 or earlier was opened.
• Solved the problem in character error. When an indirect reference file was used for a list object, characters turned to be unreadable.
• Solved the problem in saving. When the character code of a label object was changed on the property list, the change content was not saved.
• Solved the problem regarding the Word Button upper limit value. When a value over 32768 was set to the upper limit while the Test Function was active, the normal operation was disturbed.

Ver.3.20 : CX-One Version 4 Auto-update (October 2010)

New functions

• Can copy and paste structure symbols from CX-Programmer (V9.20 and higher). (CJ2 PLC)

Improved functions

• Solved the problem that prevented transfer of a project whose size is over 20 MB on NS5-[][]1[][]-V2, NSH5-[][][]1[][]-V2 and NSJ5-[][]1[][]-[][][].

Ver.3.12 : CX-One Version 4 Auto-update (July 2010)

Improved functions

• Improved the function to get the HOSTIDs that are specified by instructions such as READHOSTB more easily.
• Added the cool parts and backgrounds.

Ver.3.113 : CX-One Version 4 Auto-update (April 2010)

Improved functions

• Support importing and exporting all labels at a time.
• Support importing and exporting the contents display parts.
• Improved the display compatibility of Alarm/Event Summary & History objects between CX-Designer and NS.

Ver.3.11 : CX-One Version 4 Auto-update (December 2009)

Improved functions

• Solved the problem that alarm messages were not properly displayed by the test function.

Ver.3.11 : Version V4.* → CX-One Version 4 Auto-update (October 2009)

Improved functions

• Enhanced the function to check whether invalid object IDs exist for Validation.
• Solved the problem that Windows® fonts could be specified to reference and show the character string files.

Change history of NV-Designer

Ver.2.30 : CX-One Version 4 Auto-update (April 2022)

Improved functions

• Support hardware modification in NV3Q.

Ver.2.210 : CX-One Version 4 Auto-update (October 2017)

Improved functions

• Solved the problem that letters break out when setting for the vertical position of text string is set to middle or bottom align as text attribute.

Ver.2.202 : CX-One Version 4 Auto-update (April 2017)

New functions

• The project verification function has been supported.
• The function to select a languages in the print area has been supported.
• The function to specify top and bottom positions of character strings has been supported.
• Changing an LCD of NV3W-V1 and NV4W have been supported.

Ver.2.20: NV-Designer Update for CX-One Version 4 (January 2017)

New functions

• The project verification function has been supported.
• The function to select a languages in the print area has been supported.
• The function to specify top and bottom positions of character strings has been supported.
• Changing an LCD of NV3W-V1 has been supported.

Ver.2.10：NV-Designer Update for CX-One Version 4 (May 2016)

New functions

• The change in LCD of NV3Q-MR is now supported.

Ver.2.00 : CX-One Version 4 Auto-update (May 2015)

New functions

• Support for NV3W-V1.
• Support the function to show/hide the parts of switches and messages.
• Support index designation for the communication addresses of data parts.
• Support the TrueType(NV-Designer)/Windows® fonts that indicate numerical values in the parts of data, clocks, and bar graphs.
• Support the timer function that counts down every second for a specified period of time between 1 and 65535 seconds.
• Support the function to obtain SD card status (only for NV3Q/NV4W).
  

Ver.1.190 : CX-One Version 4 Auto-update (June 2013)

Improved functions

• Solved the problem that the set value of the Valid Condition with Function Switch can be changed when the project is read.
• Solved the problem that the set value of the Scaling with the Data Parts component can be changed when the project is read.

Ver.1.16 : CX-One Version 4 Auto-update (November 2011)

New functions

• Support NV3Q-SW**(color) PT with new LCD device.

Ver.1.15 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Solved the problem that the verification function doesn't work properly with NV4W under special conditions.

Ver.1.14 : CX-One Version 4 Auto-update (October 2010)

Improved functions

• Solved the problem that the keyboard screen was not displayed on NV3Q or NV4W under special conditions.

Ver.1.13 : CX-One Version 4 Auto-update (July 2010)

New functions

• Support GOT_NV Conversion Support Tool.

Ver.1.12 : CX-One Version 4 Auto-update (April 2010)

Improved functions

• Solved the problem that the password with 8 characters can not be used in the password on NV3Q/4W.
• Solved the problem that the parts attributes were not properly displayed in the Parts Attribute Display function.

Ver.1.11 : CX-One Version 4 Auto-update (February 2010)

Improved functions

• Solved the problem that the PLC Unit No. was not properly displayed on the Address Cross Reference.
• Solved the problem that communication errors occurred when the Units were connected in ModbusRTU mode (RS422/485).

Ver.1.10 : Version V4.* → CX-One Version 4 Auto-update (December 2009)

New functions

• Support NV4W PT.

Ver.1.02 : Version V4.* → CX-One Version 4 Auto-update (October 2009)

Improved functions

• Solved the problem that the Alarm History Information could not be uploaded properly.

Ver.1.01 : Version V4.* → CX-One Version 4 Auto-update (August 2009)

Improved functions

• Solved the problem that a text import may not be completed properly.
• Solved the problem that a screen transfer to NV through the COM port 10 or later may fail.

Change history of CX-Thermo

Ver.4.69 : CX-One Version 4 Auto-update (July 2023)

Improved functions

• Updated the USB conversion cable driver software for CX-Thermo for Windows 10 and 11.

Ver.4.69 : CX-One Version 4 Auto-update (April 2019)

New functions

• Support the following Units.
  E5DC-CX0ABM-015
  E5EC-CX0DBM-015
  E5DC-CX2ABM-015
  E5DC-CX2DBM-015
  E5DC-RX0ABM-015
  E5EC-RX0DBM-015
  E5DC-RX2ABM-00[]
  E5DC-RX2DBM-00[]
  E5EC-QX0ABM-015
  E5EC-QX0DBM-015
  E5DC-QX2ABM-00[]
  E5DC-QX2DBM-00[]

Ver.4.68 : CX-One Version 4 Auto-update (January 2018)

Improved functions

• Solved the problem that only a part of configurations in the list can be selected in English version.
• Solved the problem that some displayed settings do not match the unit panel.

Ver.4.67 : CX-One Version 4 Auto-update (June 2017)

New functions

• Support the following types.
  E5CC/E5EC/E5CD/E5ED Push-In Types.

Ver.4.66 : CX-One Version 4 Auto-update (April 2017)

New functions

• Support the following types.
  E5CD-QX2[]6M-00[]
  E5CD-RX2[]6M-00[]
  E5ED-QR4A6M-00[]
  E5ED-QX4[]6M-0[][]
  E5ED-RR4A6M-00[]
  E5ED-RX4[]6M-0[][]

Improved functions

• Solved the problem that CX-Thermo might terminate abnormally when parameters are transferred (downloaded) to E5AR-T.

Ver.4.65 : CX-One Version 4 Auto-update (April 2016)

New functions

• Support E5EC-[]B[]/E5CC-[]B[] (Push-in Plus Terminal Block Type).

Improved functions

• Solved the problem that segment time might not be transferred from the device to the computer in E5AC-T/E5EC-T/E5CC-T.
• Solved the problem that Fine Tuning screen could not start up in E5AC-T/E5EC-T/E5CC-T.

Ver.4.64 : CX-One Version 4 Auto-update (March 2015)

Improved functions

• Solved the problem that 'Control Output 2 Assignment' parameter of E5AC-CQ, E5EC-CQ, E5CC-CQ, E5AC-TCQ, E5EC-TCQ, and E5CC-TCQ cannot be set to 'Alarm 1 to Work bit 8'.

Ver.4.63 : CX-One Version 4 Auto-update (June 2014)

New functions

• Support the E5DC Ver.2.2.

Ver.4.62 : CX-One Version 4 Auto-update (March 2014)

New functions

• Support the E5GC.
• Support the E5AC-TPR/E5EC-TPR.
• Support the E5CC-U Ver.2.2.

Ver.4.61 : CX-One Version 4 Auto-update (January 2014)

New functions

• Support the E5AC-T/E5EC-T/E5CC-T Ver.1.0.
• Support the E5CC-U Ver.1.1.
• Support the E5AC/E5EC/E5CC/E5DC Ver.2.1.

Ver.4.601 : CX-One Version 4 Auto-update (October 2013)

Improved functions

• Solved the problem that PID parameters are initialized when Compare[PC-Devices].

Ver.4.60 : CX-One Version 4 Auto-update (June 2013)

New functions

• Support the E5DC.

Improved functions

• Improved the setting condition of the 'set point', if the 'multi-SP' is enabled.
• Added the function to prevent unintentional transfers to the device.

Ver.4.51 : CX-One Version 4 Auto-update (February 2013)

Improved functions

• Solved the problem that the additional parameters of the E5CC/E5EC Ver.1.1 may not be transferred or compared.

Ver.4.50 : CX-One Version 4 Auto-update (November 2012)

New functions

• Support the E5CC Ver.1.1 and Ver.2.0.
• Support the E5EC Ver.1.1 and Ver.2.0.
• Support the E5AC.

Improved functions

• Solved the problem that setting ranges of the remote SP upper limit/lower limit parameters are incorrect in case of analog input for E5EC/E5CC.

Ver.4.40 : CX-One Version 4 Auto-update (November 2011)

New functions

• E5EC/E5CC are supported.

Improved functions

• Solved the problem that the parameters since program No.9 for E5AR-T/E5ER-T can not be set.

Ver.4.30 : CX-One Version 4 Auto-update (January 2011)

New functions

[Support of New Types]

• Support THERMAC NEO programmable type E5AN-HT/E5EN-HT/E5CN-HT.

Ver.4.20 : Version V4.* → CX-One Version 4 Auto-update (August 2009)

New functions

[Support of New Types]

THERMAC NEO basic type E5GN (release in Sep. of 2009) are supported.

Change history of CompoNet DTM

－ ：CX-One Version 4 Auto-update (November 2017)

Improved functions

• Resolved the problem that the CX-Integrator was sometimes forced to terminate when the user opened and tried to edit the CX-Integrator project (* .cin file) including the CompoNet device.

－ ：CX-One Version 4 Auto-update (June 2017)

Improved functions

• Solved the problem that parameters can not be configured normally after a CompoNet EDS file of other manufacturer is installed.

－ ：CX-One Version 4 Auto-update (January 2014)

Improved functions

• Solved the problem that you could not print the data when "&" and other special characters were used in an I/O comment of CompoNetDevice.

－ ：CX-One Version 4 Auto-update (August 2012)

New functions

• Support the CompoNet communication unit for RX series inverter : Model 3G3AX-RX-CRT-E.

－ ：CX-One Version 4 Auto-update (February 2012)

New functions

• Support the CompoNet Slave device of E3X-CRT.

－ ：CX-One Version 4 Auto-update (November 2011)

New functions

• Support the CompoNet communication unit for MX2 series inverter : Model 3G3AX-MX2-CRT-E

－ ：CX-One Version 4 Auto-update (May 2011)

Improved functions

• Updated ｔｈｅ EDS files for CompoNet Devices.

－ ：CX-One Version 4 Auto-update (October 2010)

Improved functions

• Support Timeout Setting on CompoNet Master DTM.

－ ：CX-One Version 4 Auto-update (April 2010)

New functions

[Support of New Types]

• Support CompoNet CRT1B-series "Bit Slave Compact Connector type".
  Support models CRT1B-OD04JS(-1).

－ ：Version V4.* → CX-One Version 4 Auto-update (October 2009)

New functions

• CompoNet CRT1B series "Bit Slave Compact Connector type" are supported.

Improved functions

• Solved the problem that model name of CompoNet Slave CRT1-VAD04S is not displayed correctly in Parameter, Monitor and Properties Dialogs.
• Solved the problem that network - compare function returns error though the network structure including CRT1-VAD04S is correct.

－ ：Version V4.* → CX-One Version 4 Auto-update (August 2009)

Improved functions

• Solved the problem that you can not install certain EDS files.

Change history of SmartSlice I/O Coupler DTM

－ ：Version V4.* → CX-One Version 4 Auto-update (October 2009)

Improved functions

• This is a new product version of the GRT1-PRT/CRT/PNT SmartSlice I/O Coupler DTM that fixes a problem that prevents download to a slice unit if the slice has been copied and pasted

Change history of Network Configurator

Ver.3.76a : CX-One Version 4 Auto-update (January 2025)

New functions

• Support the Laser Displacement Sensor ZP-L series.

Ver.3.76 : CX-One Version 4 Auto-update (October 2024)

New functions

• Added the CJ1W-EIP21S(NJ).eds file so that connection settings can be made using the EtherNet/IP Unit (CJ1W-EIP21S) mounted on the NJ Controller.

Improved functions

• Solved the problem that the edit of parameters without Min Value and Max Value in EDS files might be impossible.
• EDS files including STRING-type parameters are now supported.

Ver.3.75 : CX-One Version 4 Auto-update (April 2024)

New functions

• Supported EtherNet/IP target device settings for the Programmable Multi-Axis Controller of CK5M-series.
• Supported the following NX502 series Controllers:
  NX502-1600, NX502-1700.

Improved functions

• Solved the problem that in the monitor function, the controller log display might not show the source and event.

Ver.3.74a : CX-One Version 4 Auto-update (July 2023)

New functions

• Support a new Laser Scanner OS33C-CS-5M.
• Support EtherNet/IP Units (CS1W-EIP21S and CJ1W-EIP21S).

Ver.3.74 : CX-One Version 4 Auto-update (April 2023)

New functions

• Support the following NX502 series Controllers:
  NX502-1300, NX502-1400, and NX502-1500.
• Support NX-EIP201 Unit.

Ver.3.72b : CX-One Version 4 Auto-update (April 2022)

New functions

• Support the following new Laser Scanners:
  - OS33C-CS-6M
  - OS33C-DM-4M
  - OS33C-DM-6M
• Updated the EDS file for NX-EIC202.

Ver.3.72a : CX-One Version 4 Auto-update (July 2021)

New functions

• Support the SYSMAC Gateway Rev.4.
• Support the update of V430-F series Auto Focus Multicode Reader.
• Support the update of F430-F series Smart Camera.

Ver.3.71 : CX-One Version 4 Auto-update (April 2021)

Improved functions

<Controller>

• Enabled to contain hyphens (-) in Tagset name.

Ver.3.70a : CX-One Version 4 Auto-update (January 2021)

New functions

• Support the built-in EtherNet/IP ports for NJ501-R[]20 series.
• Support EtherNet/IP target device settings for CK3M and CK3W (new) series Programmable Multi-Axis Controllers.
• Support F430-F series Smart Cameras.

Ver.3.70 : CX-One Version 4 Auto-update (August 2020)

New functions

• Support NJ501-R[]00 series Built-in EtherNet/IP Port.

Ver.3.69a : CX-One Version 4 Auto-update (Apr 2020)

New functions

• Support GI-series IO-Link Master Unit, NXR-ILM08C-EIT.
• Support the revision 2 of MX-Z20□□H-V1 series Laser Marker.
• Support the revision 3 of K6CM series Motor Condition Monitoring Devices shown below.
  - K6CM-VBMx-EIP Rev.3 (upgraded)
  - K6CM-ISMx-EIP Rev.3 (upgraded)
  - K6CM-CI2Mx-EIP Rev.3 (new)
• Support GI-S series Safety I/O Terminal Units.

Ver.3.68 : CX-One Version 4 Auto-update (July 2019)

New functions

• Support the K6PM series Control Panel Monitoring Device.
• Support the FHV7 series Smart Camera.
• Support the V430-F series Auto Focus Multi Code Reader.

Ver.3.67 : CX-One Version 4 Auto-update (July 2018)

New functions

• Support the following Controllers.
  - NX102 series Controllers: NX102-1220, NX102-1120, NX102-1020, NX102-9020
  - Safety Network Controller: NX-CSG320
• Support the V780 series RFID system: V780-HMD68-EIP-[][].
• Support the K6CM series Motor Condition Monitoring Devices with added functions.
• Support the Fiber Laser Marker MX-Z2000H series: MX-Z20[][]H.
  

Ver.3.65 : CX-One Version 4 Auto-update (April 2018)

New functions

• Supports the following controllers.
  NX102-series controllers

Ver.3.64 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• Solved the problem that Network Configurator might terminate abnormally when a Network Configurator v3 File (*.nvf) was loaded.

Ver.3.63 : CX-One Version 4 Auto-update (January 2018)

New functions

• Support the S8VK-X series power supply unit built-in Ethernet/IP and the K6CM series Motor Condition Monitoring Device.

Ver.3.62 : CX-One Version 4 Auto-update (October 2017)

New functions

• Support the NJ/NY series NC integrated controller of NJ501-5300.

Ver.3.61 : CX-One Version 4 Auto-update (October 2016)

New functions

Support the following Controllers.

• NX1P2 Controller Ver. 1.13
• NY512 Controller Ver. 1.12
• NY532 Controller Ver. 1.12

Ver.3.59c : CX-One Version 4 Auto-update (April 2016)

New functions

• Support the Displacement Sensor of ZW-7000 series.

Ver.3.59a : CX-One Version 4 Auto-update (October 2015)

Improved functions

• Solved the problem that non-OMRON EDS devices that include specific keywords could not be configured in the network configuration view.

Ver.3.59 : CX-One Version 4 Auto-update (April 2015)

New functions

• Support the NX7-series built-in EtherNet/IP port and NJ1-series built-in EtherNet/IP port.

Ver.3.58 : CX-One Version 4 Auto-update (March 2015)

New functions

• Support the following models.
  V680S-HMD6[]-EIP RFID systems
  NX-EIC202 EtherNet/IP Coupler

Ver.3.57 : CX-One Version 4 Auto-update (November 2014)

New functions

• Support the following models.
  CJ1W-EIP21 Rev. 3
  CS1W-EIP21 Rev. 3
  CJ2B-EIP21 (built-in EtherNet/IP port of CJ2H CPU Units) Rev. 3
  SYSMAC Gateway Rev. 3

Ver.3.56 : CX-One Version 4 Auto-update (June 2013)

New functions

• Support the FH-series Vision Sensors with built-in EtherNet/IP.

Ver.3.55 : CX-One Version 4 Auto-update (November 2012)

New functions

• Support the ZW-series (ZW-CE1*) Displacement Sensors.

Improved functions

• Support the connection setting with odd-byte Tag (including the physical address) on the CPU built-in EtherNet/IP port and EtherNet/IP unit for CS/CJ-series PLCs.
• Expanded the communications band for each line in the multi-line random mode on FZ-series vision sensors.

Ver.3.53 : CX-One Version 4 Auto-update (August 2012)

New functions

• Support the FQ-series Vision Sensors with built-in EtherNet/IP.

Ver.3.51 : CX-One Version 4 Auto-update (April 2012)

Improved functions

• Improved the print function of EtherNet/IP Datalink Tool.

Ver.3.50 : CX-One Version 4 Auto-update (February 2012)

Improved functions

• Updated the EDS file for FZ Series and FJ Series Vision Sensor.

Ver.3.40 : CX-One Version 4 Auto-update (August 2011)

Improved functions

• Updated the FZ Series EDS file.
• Solved the problem that connection with same name is wrongly created on "Edit All..." function.

Ver.3.22 : CX-One Version 4 Auto-update (January 2011)

New functions

[Support of New Types]

• Support the Model FZ3.

Ver.3.21 : CX-One Version 4 Auto-update (October 2010)

New functions

[Support of New Types]

• Support for the built-in EIP Unit version 2.1 of CJ2M-CPU3[] that allows tag data link of a maximum of 640CH.

Ver.3.20 : CX-One Version 4 Auto-update (February 2010)

New functions

[Support of New Models]

• Supports CJ2M CPU Units.
  Supports models CJ2M-CPU[][].

Ver.3.10 : Version V4.* → CX-One Version 4 Auto-update (December 2009)

New functions

• New functions of Datalink Wizard and EtherNet/IP Device Drag&Drop have been added to simplify the Tag Datalink (connection) configuration.

Improved functions

• Solved the problem that connection setting to 3rd party EtherNet/IP device can not be transferred to the Unit in particular case.

Change history of Communications Middleware

Ver.1.41 : CX-One Version 4 Auto-update (April 2023)

Improved functions

• Solved the problem that a computer in which the Direct connection via Ethernet function was disabled affected the communications of other products.

Ver.1.40 : CX-One Version 4 Auto-update (July 2022)

New functions

• Support the secure communications with NJ/NX series CPU Units.

Ver.1.35.4 : CX-One Version 4 Auto-update (January 2021)

Improved functions

• Solved the problem that an installation might fail depends on a PC environment.

Ver.1.35.3 : CX-One Version 4 Auto-update (Apr 2020)

Improved functions

• Updated the configuration module for Sysmac Studio.

Ver.1.35 : CX-One Version 4 Auto-update (October 2019)

Improved functions

• Updated the configuration module for Sysmac Studio.

Ver.1.33 : CX-One Version 4 Auto-update (October 2016)

Improved functions

• Added service names to error messages so that the user can see which service is stopped when OMRON USB Connection Manager or OMRON USB Serial Connection Manager is stopped.
• Added the shortcut to NetworkBrowser.exe to the Windows Start menu.

Ver.1.32 : CX-One Version 4 Auto-update (July 2016)

New functions

Support the direct USB connection to the following Servo Drives.

• 1S Series (R88D-1SN[][][]-ECT)

Ver.1.31 : CX-One Version 4 Auto-update (April 2016)

Improved functions

• Improved the connectivity via USB.

Ver.1.30 : CX-One Version 4 Auto-update (December 2015)

Improved functions

• Solved the problem that USB connection to a Controller failed due to uninstallation failure of the previous version.

Ver.1.02 : CX-One Version 4 Auto-update (April 2012)

New functions

• Support the CP1L-EL / -EM CPU Units.
  Support the models CP1L-EL[][][][]-[] and CP1L-EM[][][][]-[].

Change history of CX-ConfiguratorFDT

Ver.3.02 : CX-One Version 4 Auto-update (April 2024)

Improved functions

• Solved the problem that the Create PDF reports function sometimes failed in the Japanese Windows environment.

Ver.3.01 : CX-One Version 4 Auto-update (January 2024)

New functions

• Support the NXR-ILM08C-ECT,EtherCAT Network type IO-Link master device.

Ver.3.00 : CX-One Version 4 Auto-update (July 2023)

New functions

• Support the latest version of fdtCONTAINER 4.x.
• Added the IODD finder.

Ver.2.59 : CX-One Version 4 Auto-update (April 2023)

New functions

• The online connection via NX-EIP201, that is a NX series EtherNet/IP Unit, is available.

Ver.2.58 : CX-One Version 4 Auto-update (October 2022)

Improved functions

• Solved the issue where xml files for language resources were displayed on the selection screen when installing IODD with multiple languages.

Ver.2.57 : CX-One Version 4 Auto-update (July 2022)

New functions

• Support the secure communications with NJ/NX series CPU Units.

Improved functions

• Solved the problem that [Clear the Backup Data] on the Diagnosis Tab page for GX series IO-Link Master Unit (GX-ILM08C) did not work.

Ver.2.56 : CX-One Version 4 Auto-update (January 2022)

Improved functions

• Solved the problem that CX-ConfiguratorFDT might fail to read a project file containing the PROFIBUS correctly.

Ver.2.54 : CX-One Version 4 Auto-update (Apr 2020)

New functions

• Support NXR-series IO-Link Master Unit, NXR-ILM08C-EIT.

Ver.2.53 : CX-One Version 4 Auto-update (January 2019)

New functions

• Support the E2E-NEXT(IO-Link embedded) series proximity sensors.
  

Ver.2.52 : CX-One Version 4 Auto-update (July 2018)

New functions

• Support the E8PC-series IoT Pressure Sensors and E8FC-series IoT Flow Sensors.

Improved functions

• IODD can be installed regardless of the version of IODD-Checker written in the IODD.

Ver.2.51 : CX-One Version 4 Auto-update (January 2018)

Improved functions

• Support the version up of E3S-DC series Color mark sensors.

Ver.2.5 : CX-One Version 4 Auto-update (October 2017)

New functions

• Support the IODD file install function on Device Catalogue View.

Ver.2.4 : CX-One Version 4 Auto-update (June 2017)

Improved functions

• Enable the user to use the tool via a CPU or the Ethernet for setting the IO-Link device connected to the IO-Link Maser (NX-ILM400) on the EtherNet/IP Coupler (NX-EIC202) Ver.1.2.

Ver.2.3 : CX-One Version 4 Auto-update (October 2016)

New functions

• Support the settings of IO-Link devices that are conncted to IO-Link master (NX-ILM400 Unit) on the CPU Rack of NX1P2 Controller.

Ver.2.2 : CX-One Version 4 Auto-update (July 2016)

New functions

• Support the IO-Link device settings.
  

Change history of NX-IO Configurator

Ver.1.23 : CX-One Version 4 Auto-update (April 2023)

New functions

• Support the NX Series Digital IO unit of NX-ID6342, NX-ID6442, NX-OD6121, and NX-OD6256.

Ver.1.22 : CX-One Version 4 Auto-update (Apr 2020)

New functions

• Support NX-series Temperature Controller Unit, NX- TC version 1.3.

Ver.1.14 : CX-One Version 4 Auto-update (October 2019)

New functions

• Support NXｰseries Temperature Control Unit (NX-TC) Ver1.2.

Ver.1.20 : CX-One Version 4 Auto-update (July 2019)

New functions

• Support the simple setting function for IO-Link master (NX-ILM400).

Ver.1.13 : CX-One Version 4 Auto-update (October 2018)

New functions

• Support NX series RFID Unit (NX-V680).

Ver.1.12 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• Support upgrade of NX-series Temperature Controller Unit (NX-TC).

Ver.1.11 : CX-One Version 4 Auto-update (January 2018)

New functions

• Support NX series Temperature Controller Unit (NX-TC)

Ver.1.01 : CX-One Version 4 Auto-update (October 2017)

New functions

• Support NX-ILM400 Ver 1.1.

－ ：CX-One Version 4 Auto-update (June 2017)

New functions

• Omron releases the new setting tool for the EtherNet/IP Coupler and the NX I/O Units (except the safety control unit).

Change history of CX-FLnet

Ver.1.10 : CX-One Version 4 Auto-update (April 2018)

Improved functions

• Solved the problem that CX-FLnet might terminate abnormally when a CX-FLnet setting file (*.fln) was loaded.