An application example of the basic standard nozzle.
Ionizer (Air Push Type)
last update: May 23, 2013
An application example of the basic standard nozzle.
Injects ionized air over an angle of 60° or 90°.
• Injects ionized air over an angle of 90° to enable ionization of comparatively wide objects.
• The air blow direction can be changed.
Attach the Optional Tube to the Standard Nozzle to blow ionized air close to the workpiece for pin-point ionization.
• Neutralizes static electricity over a wide area.
• Five ionization areas from 100 to 500 mm.
• The air blow direction can be changed.
Combine the nozzle cap at the tip of the nozzle to enable many ionization applications.
High-speed ionization of the target spot is possible by using a tube or metal pipe to get closer to the workpiece.
The Ionizer can be brought as close as 1 mm to the workpiece.
Only the 24-VDC power supply for the Ionizer is needed.
No dangerous high-voltage wiring is required.
Uses more compact high-frequency AC method with excellent ion balance and stability.
Controller section built in. Simple all-in-one Unit that installs easily just about anywhere.
last update: May 23, 2013