Page top

NX-SL3[][][]

Safety CPU Unit

NX-SL3[][][]

The simplest way to integrate safety into ultra-high-speed machine automation - Bring safety to your production site

Safety CPU Unit NX-SL3[][][]

Unit type Appearance Specification Unit
version
Model
Maximum number
of safety I/O points
Program
capacity
Number of
safety I/O
connections
I/O
refreshing
method
Safety CPU
Unit
(NX-SL3[][][])
3243_lu_1_1 256 points 512KB 32 Free-Run
refreshing
Ver. 1.1 NX-SL3300
3243_lu_1_2 1024 points 2048KB 128 Free-Run
refreshing
Ver. 1.1 NX-SL3500

Accessories

Not included.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product name Specifications Model
Number of
licenses
Media
Sysmac Studio
Standard Edition
Ver.1.[][] *1
The Sysmac Studio is the software that provides
an integrated environment for setting, programming,
debugging and maintenance of machine automation
controllers including the NJ/NX-series CPU Units,
NY-series Industrial PC,EtherCAT Slave, and the
HMI.

Sysmac Studio runs on the following OS. *2
Windows 7(32-bit/64-bit version)/
8(32-bit/64-bit version)/8.1(32-bit/64-bit version)/
10(32-bit/64-bit version)/11(64-bit version)

The Sysmac Studio Standard Edition DVD
includes Support Software to set up EtherNet/IP
Units, DeviceNet slaves, Serial Communications
Units, and Support Software for creating screens
on HMIs (CX-Designer).
* Refer to your OMRON website for details such
as supported models and functions.
---
(Media only)
Sysmac
Studio
32-bit
edition
DVD
SYSMAC-SE200D
---
(Media only)
Sysmac
Studio
64-bit
edition
DVD
SYSMAC-SE200D-64
1 license
*3
--- SYSMAC-SE201L
Sysmac Studio
Safety Edition
Ver.1.[][] *4
Sysmac Studio Safety Edition is a license including
necessary setting functions for the safety control
system.
* This product is a license only. You need the
Sysmac Studio Standard Edition DVD media to
install it.
1 license --- SYSMAC-FE001L

Note: For details of the automation software Sysmac Studio, refer to your local OMRON website.
*1 The SYSMAC-SE[][][]L Sysmac Studio Standard Edition with license(s) provides functions that the SYSMAC-FE001L
     Safety Edition provides.
     With the version 1.10 or higher, you can use the setup functions for the EtherNet/IP Coupler Unit.
*2 SYSMAC-SE200D-64 runs on Windows 10 (64-bit edition) or higher.
*3 Multi licenses are available for the Standard Edition (3, 10, 30, or 50 licenses).
*4 Safety Edition can be used with Communication Control Unit and EtherNet/IP Coupler Unit. The SYSMAC-NE001L NX-I/O
     Edition can be used for configuration of a stand-alone safety control system using the EtherNet/IP Coupler Unit and
     NX-SL3300 Safety CPU Unit.