GlobalQuestion
Are there cables available to connect Mitsubishi Programmable Controller I/O Modules and I/O Relay Terminals?
Answer
Cables are available to connect 32-point and 64-point Connector-type I/O Modules for Mitsubishi Programmable Controllers.
Note:
1.Insert a 2- or 3-digit number corresponding to the cable dimensions.
2.Insert a 2- or 3-digit number corresponding to the cable dimensions.
| Dimensions (mm) | Input | Output | |
| (A) | (B) | Model | Model |
| 1,000 | 750 | G79-I100C-75-MN | G79-O100C-75-MN |
| 1,500 | 1,250 | G79-I150-125-MN | G79-O150C-125-MN |
| 2,000 | 1,750 | G79-I1200-175-MN | G79-O200C-175-MN |
| 3,000 | 2,750 | G79-I1300-275-MN | G79-O300C-275-MN |
Note:Before use, check the input voltage and other specifications of the Programmable Controller Module as well as the model and rated voltage of the I/O Relay Terminal.
Recommended Products
S8VS
Multi-Function Indication Monitor for Production Site Visualization * (* Models with indication monitor)
ZJ-FA20
High-speed, High cost performance Ionization
S8JX
Flexible Selection of Reliability and Ease of Operation with the S8JX. New Models with Harmonic Current Suppression for a Broader Lineup.
FAQ
Top of page