GlobalE3FA-DN21
Photoelectric Sensors
Image
Photoelectric Sensor, Diffuse-reflective, Sensing distance: 100 mm, NPN output, M12 connector
| Sensing method |
Diffuse-reflective |
|---|---|
| Sensing distance |
White paper 300 x 300 mm: 100 mm |
| Light source |
Red LED (624 nm) |
| Connection method |
M12 connector models |
- Ratings/Performance
As of March 10, 2025
| Shape | Cylinder type |
|---|---|
| Sensing method | Diffuse-reflective |
| Sensing distance | White paper 300 x 300 mm: 100 mm |
| Spot size | 40 x 45 mm (sensing distance: 100 mm) |
| Differential distance | 20% max. |
| Light source | Red LED (624 nm) |
| Power supply voltage | 10 to 30 VDC±10% ripple (p-p) 10% included |
| Current consumption | 25 mA max. |
| Control output | NPN open collector 30 VDC max. 100 mA max. Residual voltage: 3 V max. |
| Operation mode | Light-ON/Dark-ON selectable |
| Protective circuit | Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection |
| Response time | Operate or reset: 0.5 ms max. |
| Sensitivity setting | Single-turn adjustment |
| Ambient illuminance | Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. |
| Ambient temperature range (Operating) | -40 to 55 ℃ (with no freezing or condensation) |
| Ambient temperature range (Storage) | -40 to 70 ℃ (with no freezing or condensation) |
| Ambient humidity range (Operating) | 35 to 85 % (with no condensation) |
| Ambient humidity range (Strage) | 35 to 95 % (with no condensation) |
| Insulation resistance | 20 MΩ min. (500 VDC megger) |
| Dielectric strength | 1000 VAC 50/60 Hz 1 min |
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h |
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y and Z directions |
| Degree of protection | IEC: IP67 DIN40050-9: IP69K |
| Connection method | M12 connector models |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Weight | Package: Approx. 20 g Main Unit: Approx. 10 g |
| Accessories | Instruction sheet, M18 nuts |
| Material | Case: ABS Lens: Methacrylate resin (PMMA) Display: Methacrylate resin (PMMA) Adjustment: POM Nut: POM |
As of March 10, 2025
- Dimensions
As of March 10, 2025
As of March 10, 2025
- Output circuit diagram
As of March 10, 2025
As of March 10, 2025
- Timing chart
As of March 10, 2025
As of March 10, 2025
- Operating range
As of March 10, 2025
As of March 10, 2025
- Setting distance
As of March 10, 2025
Excess gain ratio vs. setting distance
Sensing object size vs. setting distance
As of March 10, 2025
Series
Top of page
© Copyright OMRON Corporation 2007 - 2021. All Rights Reserved.