Industrial Automation

Global

Global Navigation

Primary Contents

Site Search Results

Site Search Product Search IA Global Search
Results 1001 - 1010 of 1189
PDF1 Single-phase Overcurrent/Undercurrent Relay
...to 100% of the rated current (i.e., 10 to 100 A). Pass the conductors through the CT five times so that at least 10 A of current flows. The input current to the K8AK will be 25 A (i.e., 5 A x...

https://www.ia.omron.com/data_pdf/cat/k8ak-aw_n180-e1_4_8_csm1020910.pdf

PDF1 Conductive Level Controller K8AK-LS
...ear radio wave receivers. 13.Install an external switch or circuit breaker and label it clearly so that the operator can quickly turn OFF the power supply. 14.Make sure the indicators operate...

https://www.ia.omron.com/data_pdf/cat/k8ak-ls_n188-e1_4_9_csm1020918.pdf

PDF1 Three-phase Asymmetry and Phase-sequence Phase-l...
...oad phase loss cannot be detected during operation. 6. Phase loss is detected based on voltage, so phase loss cannot be detected on the load side. Flashing Flashing Calculating the Asymmetry ...

https://www.ia.omron.com/data_pdf/cat/k8ak-pa_n186-e1_3_7_csm1020916.pdf

PDF1 Phase-sequence Phase-loss Relay
...ear radio wave receivers. 12.Install an external switch or circuit breaker and label it clearly so that the operator can quickly turn OFF the power supply. 13.Make sure the indicators operate...

https://www.ia.omron.com/data_pdf/cat/k8ak-ph_n183-e1_3_6_csm1020913.pdf

PDF1 Three-phase Voltage and Phase-sequence Phase-los...
...et value and measure the time until the Unit operates. Operating Time Adjust the slide resistor so that the voltage applied to the K8AK terminals is 120% of the set value (for overvoltage det...

https://www.ia.omron.com/data_pdf/cat/k8ak-pm_n185-e1_3_7_csm1020915.pdf

PDF1 Three-phase Voltage Relay K8AK-PW
...et value and measure the time until the Unit operates. Operating Time Adjust the slide resistor so that the voltage applied to the K8AK terminals is 120% of the overvoltage set value or 80% o...

https://www.ia.omron.com/data_pdf/cat/k8ak-pw_n184-e1_3_8_csm1020914.pdf

PDF1 Temperature Monitoring Relay K8AK-TH
...ear radio wave receivers. 18.Install an external switch or circuit breaker and label it clearly so that the operator can quickly turn OFF the power supply. 19.When cleaning the product, do no...

https://www.ia.omron.com/data_pdf/cat/k8ak-th_n187-e1_4_7_csm1020917.pdf

PDF1 Thermistor Motor Protection Relay
... value for which the alarm indicator (TS_ALM) lights. The contact outputs switch simultaneously so that you can confirm operation. Note: Refer to the timing charts for the operating methods f...

https://www.ia.omron.com/data_pdf/cat/k8ak-ts_pt_n189-e1_3_7_csm1020919.pdf

PDF1 Single-phase Voltage Relay K8AK-VS
...ear radio wave receivers. 13.Install an external switch or circuit breaker and label it clearly so that the operator can quickly turn OFF the power supply. 14.Make sure the indicators operate...

https://www.ia.omron.com/data_pdf/cat/k8ak-vs_n181-e1_2_9_csm1020911.pdf

PDF1 Single-phase Overvoltage/Undervoltage Relay
...ear radio wave receivers. 13.Install an external switch or circuit breaker and label it clearly so that the operator can quickly turn OFF the power supply. 14.Make sure the indicators operate...

https://www.ia.omron.com/data_pdf/cat/k8ak-vw_n182-e1_2_8_csm1020912.pdf

Results 1001 - 1010 of 1189

Related Contents

Site Information

© Copyright OMRON Corporation 2007 - . All Rights Reserved.