Primary Contents

Site Search Results

Site Search Product Search IA Global Search
Results 1501 - 1510 of 1597
PDF1 Advanced Motor Condition Monitoring Device K7DD
...lamp the special CT on the line for each phase and then press the hook firmly until you hear it lock into place. •Do not ground the special CT. Doing so may result in malfunction. K7DD + - + ...

https://www.ia.omron.com/data_pdf/cat/k7dd_n234-e1_3_3_csm1124083.pdf

PDF1 Heater Condition Monitoring Device K7TM
...rm generated on the current channel AGE Lit as a guideline when it is time to replace the K7TM. LOCK Lit when setting change protection is enabled. (E) Operation Keys Level Key ( ) Selects th...

https://www.ia.omron.com/data_pdf/cat/k7tm_n228-e1_3_3_csm1115712.pdf

PDF1 Single-phase Current Relay K8AK-AS
... A or 0 to 5 A). •Manual resetting and automatically resetting supported by one Relay. •Startup lock and operating time can be set separately. •One SPDT output relay, 5 A at 250 VAC (resistiv...

https://www.ia.omron.com/data_pdf/cat/k8ak-as_n179-e1_4_7_csm1020909.pdf

PDF1 Single-phase Overcurrent/Undercurrent Relay
... A or 0 to 5 A). •Manual resetting and automatically resetting supported by one Relay. •Startup lock and operating time can be set separately. •Two sets of SPDT output contacts, 5 A at 250 VA...

https://www.ia.omron.com/data_pdf/cat/k8ak-aw_n180-e1_4_8_csm1020910.pdf

PDF1 Conductive Level Controller K8AK-LS
...water Electrodes Electrode Rods Electrode Rods are available in sets with the connection nuts, lock nuts, and tightening screws. Others Refer to Safety Precautions on page 7. For the most r...

https://www.ia.omron.com/data_pdf/cat/k8ak-ls_n188-e1_4_9_csm1020918.pdf

PDF1 Three-phase Asymmetry and Phase-sequence Phase-l...
...ting range (T) Asymmetry 0.1 to 30 s Phase sequence 0.1 s±0.05 s Phase loss 0.1 s max. Power ON lock time (LOCK) 1 s/5 s (Changed with the DIP switch.) Indicators Power (PWR): Green,...

https://www.ia.omron.com/data_pdf/cat/k8ak-pa_n186-e1_3_7_csm1020916.pdf

PDF1 Phase-sequence Phase-loss Relay
... tab at the top and the hooks at the bottom. 2. Push the product onto the Track until the hooks lock into place. •Removing from the DIN Track Pull down on the bottom hook with a flat-blade sc...

https://www.ia.omron.com/data_pdf/cat/k8ak-ph_n183-e1_3_6_csm1020913.pdf

PDF1 Three-phase Voltage and Phase-sequence Phase-los...
...Overvoltage/undervoltage 0.1 to 30 s Phase sequence 0.1 s±0.05 s Phase loss 0.1 s max. Power ON lock time (LOCK) 1 s or 5 s (Switched using DIP switch.) Indicators Power (PWR): Green...

https://www.ia.omron.com/data_pdf/cat/k8ak-pm_n185-e1_3_7_csm1020915.pdf

PDF1 Three-phase Voltage Relay K8AK-PW
...matic reset Operating time setting range (T) Overvoltage and undervoltage: 0.1 to 30 s Power ON lock time (LOCK) 1 s/5 s (Changed with the DIP switch.) Indicators Power (PWR): Green,...

https://www.ia.omron.com/data_pdf/cat/k8ak-pw_n184-e1_3_8_csm1020914.pdf

PDF1 Temperature Monitoring Relay K8AK-TH
... tab at the top and the hooks at the bottom. 2. Push the product onto the Track until the hooks lock into place. •Removing from the DIN Track Pull down on the bottom hook with a flat-blade sc...

https://www.ia.omron.com/data_pdf/cat/k8ak-th_n187-e1_4_7_csm1020917.pdf

Results 1501 - 1510 of 1597