GlobalSite Search Results
| Site Search | Product Search | IA Global Search |
previous
Correct use of Ultrasonic Sensors | OMRON Industri...- ...is affected by the condition of the reflection surface of the detected object. Mount the sensor so that the ultrasound beam is perpendicular to the reflection surface. Obstacles around the se...
https://www.ia.omron.com/product/cautions/55/precautions_for_correct_use.html
- power supply harmonics - Glossary index | OMRON In...
- ...mercial power supply frequency. In Japan, the commercial power supply frequency is 50 or 60 Hz, so the power supply harmonics are, for example, double or triple that frequency, i.e., 100 and ...
- explanation_of_terms.html
- ...OFF angle settings for the cam. Cam Protection Protection that can be set for each bank and cam so that the cam ON/OFF angle settings will not be accidentally changed or deleted. Test Operati...
https://www.ia.omron.com/support/guide/12/explanation_of_terms.html
- Further Information of Programmable Terminals Tech...
- ... Type Two materials with transparent conductive layers (ITO) are placed with a gap between them so that transparent conductive layers are facing each other. When the touch panel is pressed do...
https://www.ia.omron.com/support/guide/27/further_information.html
- Overview of Code Readers | OMRON Industrial Automa...
- ...ndards. When the quality of the barcode printing is not good, the data may be read incorrectly, so it is important to take care in printing labels etc. Features of Barcodes Highly flexibility...
- Overview of Code Readers | OMRON Industrial Automa...
- ...ndards. When the quality of the barcode printing is not good, the data may be read incorrectly, so it is important to take care in printing labels etc. Features of Barcodes Highly flexibility...
https://www.ia.omron.com/support/guide/349/introduction.html
- further_information.html
- ...g cable length of 120 meters. This corresponds to a wiring cable length of 150 max. in Table 2, so the maximum length of Sensing Band that can be connected is 150 meters. Example: Parallel Co...
https://www.ia.omron.com/support/guide/48/further_information.html
- Safety Components - CE Marking - Europe, Pan Europ...
- ...D40A-2 ● D40A *1. Use the D40A-2 and D40A in combination with the G9SX-NS/NSA ,G9SP or NX-SL/SI/SO. Note: Contact your OMRON representative if Applicable Standard No.and Certification Body ar...
- Safety Components - Regulatory Compliance Mark (RC...
- ...-2*1 ● D40A*1 *1. Use the D40A-2 and D40A in combination with the G9SX-NS/NSA ,G9SP or NX-SL/SI/SO. Note: Contact your OMRON representative if Applicable Standard No. are required. Top of pag...
- Safety Components - UKCA Marking (Machinery, Low-V...
- ... Not applicable ● D40A*1 *1. Use the D40A in combination with the G9SX-NS/NSA, G9SP or NX-SL/SI/SO. Note: Contact your OMRON representative if Applicable Standard No.and Certification Body ar...
Top of page
© Copyright OMRON Corporation 2007 -
. All Rights Reserved.
OMRON Corporation