...s datasheet unless otherwise specified. E3S-LS3N(T)/E3S-LS3P(T) E3S-LS3NW(T)/E3S-LS3PW(T) * The timer adjuster is only for models with the timer function. last update: November 12, 2...

https://www.ia.omron.com/products/family/1167/dimension.html

...update: September 24, 2012 Sensors Sensing method Appearance Connection method Sensing distance Timer function Model NPN output PNP output Convergent- reflective Pre-wired (2 m) 20 to 35 mm *...

https://www.ia.omron.com/products/family/1167/lineup.html

...rt-circuit protection, Mutual interference prevention Response time Operate or reset: 1 ms max. Timer function (only models with timer function) OFF-delay range: 0.1 to 1.0 s (adjust...

https://www.ia.omron.com/products/family/1167/specification.html

...mA max. Max. applied voltage: 30 VDC max. OFF leakage current: 1.5 mA max. Startup compensation timer input NPN open collector or no-voltage contact signal ON residual voltage: 2 V max. ON cu...

https://www.ia.omron.com/products/family/1537/specification.html

... NPN output PNP output Pre-wired model (2 m) Tough Mode Super Tough Mode ON-delay and OFF-delay timer E3X-DA11TG-S 2M * E3X-DA41TG-S 2M * * Production was discontinued. last update: July 19, ...

https://www.ia.omron.com/products/family/1985/lineup.html

...Mode (STND): Operate/reset in 1 ms each, High-resolution Mode (HRES) Operate/reset in 4 ms each Timer function ON-delay/OFF-delay timer, OFF-delay timer, ON-delay ...

https://www.ia.omron.com/products/family/1985/specification.html

...ng between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-...

https://www.ia.omron.com/products/family/3543/specification.html

...ng between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting, timer function of the control output and timer time selecting, instability output (IO-...

https://www.ia.omron.com/products/family/3544/specification.html

...(2 m) 1 output + 1 input E3X-ZV21 2M E3X-ZV51 2M Wire-saving Connector E3X-ZV7 E3X-ZV9 Enhanced timer function models Wire-saving Connector 1 output E3X-ZV6M E3X-ZV8M 2-channel model Type Con...

https://www.ia.omron.com/products/family/3831/lineup.html

...][]S4 (T)(-[]) models) Operate or reset: 5 ms max. Sensitivity adjustment --- One-turn adjuster Timer function * ON-delay/OFF-delay/One-shot delay switch selectable Delay time: 0.1 to 5 s (ad...

https://www.ia.omron.com/products/family/421/specification.html

...ifications within the maximum rated voltage range. Suitable Relay/Solid State Relay/Solid-State Timer Classification I/O Terminal Socket Relay Solid State Relay (SSR) Solid-State ...

https://www.ia.omron.com/products/family/860/lineup.html

...point area tuning, 1-point area tuning, or Area tuning without workpiece), or Manual adjustment Timer function Select from Timer disabled, OFF-delay, ON-delay, One-shot, or ON-delay ...

https://www.ia.omron.com/product/item/107/

...non-current carrying metal parts: 4.5 kV Noise immunity Between reset terminals: ±500 V Between timer input terminals: ±500 V square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1...

https://www.ia.omron.com/product/item/4375/

...non-current carrying metal parts: 4.5 kV Noise immunity Between reset terminals: ±500 V Between timer input terminals: ±500 V square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1...

https://www.ia.omron.com/product/item/4376/

...non-current carrying metal parts: 4.5 kV Noise immunity Between reset terminals: ±500 V Between timer input terminals: ±500 V square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1...

https://www.ia.omron.com/product/item/4377/

...non-current carrying metal parts: 4.5 kV Noise immunity Between reset terminals: ±500 V Between timer input terminals: ±500 V square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1...

https://www.ia.omron.com/product/item/4378/

...rrying terminals and exposed non-current carrying metal parts: 100 MΩ min. (at 500 VDC) Between timer input terminals and reset terminals: 100 MΩ min. (at 500 VDC) Dielectric withstand voltag...

https://www.ia.omron.com/product/item/4379/

...rrying terminals and exposed non-current carrying metal parts: 100 MΩ min. (at 500 VDC) Between timer input terminals and reset terminals: 100 MΩ min. (at 500 VDC) Dielectric withstand voltag...

https://www.ia.omron.com/product/item/4380/

...rrying terminals and exposed non-current carrying metal parts: 100 MΩ min. (at 500 VDC) Between timer input terminals and reset terminals: 100 MΩ min. (at 500 VDC) Dielectric withstand voltag...

https://www.ia.omron.com/product/item/4381/

...rrying terminals and exposed non-current carrying metal parts: 100 MΩ min. (at 500 VDC) Between timer input terminals and reset terminals: 100 MΩ min. (at 500 VDC) Dielectric withstand voltag...

https://www.ia.omron.com/product/item/4382/