...e, and power supply voltage) can be repeatedly detected. Response time The delay from the light input turning ON/OFF until the control output operation or release operation. The following equ...

https://www.ia.omron.com/support/guide/24/explanation_of_terms.html

...utside of the PLC and the I/O response time are also longer, making it impossible to receive an input signal that is shorter than the cycle time. When the cycle time is short, I/O response ti...

https://www.ia.omron.com/support/guide/26/explanation_of_terms.html

...nsors. Detection is not possible in this area. Response time The delay time from when the light input turns ON or OFF until the control output operates or resets. In general for Photoelectric...

https://www.ia.omron.com/support/guide/43/explanation_of_terms.html

... the drive mechanism in an external Servo Drive or the sensing mechanism in an external Encoder Input Slave Unit. Axes Group A functional unit that groups together axes within the Motion Cont...

https://www.ia.omron.com/support/guide/454/explanation_of_terms.html

... the zero point, the phases must be the same. Phase difference may result in malfunctions. (The input signal and output value will not match.) Duty Setting As shown in the following graph, ch...

https://www.ia.omron.com/support/guide/54/explanation_of_terms.html

...en an Average-value-rectification Converter and an Effective-value-calculation Converter if the input is a sine wave. Neither type is better than the other. There is a general misunderstandin...

https://www.ia.omron.com/support/guide/63/further_information.html

...480V, 3phase-4wire: 220/230/240/277V) CAN/CSA-C22.2 No. 14 3211 07 LR67027 K8AK-PT Power Supply Input：100 to 240V AC Monitoring Input：3phase-3wire (AC200 to 480 V) CAN/CSA-C22.2 No...

https://www.ia.omron.com/support/models/csa/other.html

...3PW was obtained from C-UL-US (CSA 22.2 No.14). 　 Model Ratings Standard No. Class No. File No. Input Ratings G3ZA-4H203-FLK-UTU --- CSA C22.2 No.14 3211 07 3211 87 LR51460 100 to 240V AC G3...

https://www.ia.omron.com/support/models/csa/relay.html

...Model Ratings Standard No. Class No. File No. E3JM-10M4( )-US E3JM-DS70M4( )-US E3JM-R4M4( )-US Input: 24 to 240V AC 50/60Hz 12 to 240V DC Output : 3A 250V AC/3A 30V DC (Relay output) 100mA 4...

https://www.ia.omron.com/support/models/csa/sensor.html

...-contact Door Switches Model Standard No. Certification No. D40A -- Z10060839656108 G9SX-NS/NSA Input: 24V DC output(semiconductor): 24V DC 0.8A Note: Use the D40A in combination with the G9S...

https://www.ia.omron.com/support/models/tuv_p/safety.html

...W max. NRNT2/NRNT8 Recognition M2S Lamp 28V 1.2W max. NRNT2/NRNT8 Recognition M16 Lamp 24V max.(Input Voltage) 120V AC(Input Voltage) with Voltage Reduction Unit 240V AC(...

https://www.ia.omron.com/support/models/ul/switch.html

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 0 to 1.5 V (short circuit current: approx. 1.5 mA) EDM 0 to 1....

https://www.ia.omron.com/product/item/18727/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 9 V to Vs (short circuit current: approx. 2.0 mA) EDM 9 V to V...

https://www.ia.omron.com/product/item/18728/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 0 to 1.5 V (short circuit current: approx. 1.5 mA) EDM 0 to 1....

https://www.ia.omron.com/product/item/18733/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 9 V to Vs (short circuit current: approx. 2.0 mA) EDM 9 V to V...

https://www.ia.omron.com/product/item/18734/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 0 to 1.5 V (short circuit current: approx. 1.5 mA) EDM 0 to 1....

https://www.ia.omron.com/product/item/18736/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 9 V to Vs (short circuit current: approx. 2.0 mA) EDM 9 V to V...

https://www.ia.omron.com/product/item/18737/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 0 to 1.5 V (short circuit current: approx. 1.5 mA) EDM 0 to 1....

https://www.ia.omron.com/product/item/18738/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 9 V to Vs (short circuit current: approx. 2.0 mA) EDM 9 V to V...

https://www.ia.omron.com/product/item/18739/

...ator output 2: ON when lock-out for a basic system, ON when muting/override for a muting system Input voltage (ON voltage) RESET 0 to 1.5 V (short circuit current: approx. 1.5 mA) EDM 0 to 1....

https://www.ia.omron.com/product/item/18742/