.... 10,000 E53-V35N 0 to 5 VDC, load: 1 kΩ min., resolution: approx. 10,000 USB-Serial Conversion Cable Model E58-CIFQ1 Terminal Cover Connectable models Model E5AN-H E53-COV16 E5EN-H Note: The...

https://www.ia.omron.com/products/family/1947/lineup.html

...p Tool port Provided on the bottom of the E5AN-H and E5EN-H. An E58-CIFQ1 USB-Serial Conversion Cable is required to connect the computer to the E5AN-H and E5EN-H. Standards Approved standard...

https://www.ia.omron.com/products/family/1947/specification.html

.../backward) Degree of protection IEC60529, IP67 Connection method Connector connection (standard cable length: 500 mm) Weight (packed state) Approx. 160 g (main unit only: Approx. 75 g) Materi...

https://www.ia.omron.com/products/family/2979/specification.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3441/accessory.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3443/accessory.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3444/accessory.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3448/accessory.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3449/accessory.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3451/accessory.html

...Z-A-B01Y 2 holes A22NZ-A-B102 A22NZ-A-B202 3 holes A22NZ-A-B103 A22NZ-A-B203 Connector Suitable Cable Diameter (mm) 7 to 9 dia. A22Z-3500-1 Plastic connector used to extend a cable f...

https://www.ia.omron.com/products/family/3452/accessory.html

... Dimensions Catalog last update: April 1, 2025 Type (A side) Name I/O Classification Appearance Cable length L (mm) Models Loose wire connectins Cables with Loose Wires and Crimp Terminals XW...

https://www.ia.omron.com/products/family/3654/lineup.html

...en ordering, add "-M1J 0.3M" to the end of the model number (e.g., E3Z-T61-M1J 0.3M).       The cable is 0.3 m long. The applicable Sensor I/O Connector is the XS2 Series. For details, refer ...

https://www.ia.omron.com/products/family/407/lineup.html

... ms max. Operate or reset: 1 ms max. Degree of protection IEC, IP67 Connection method Pre-wired cable (standard length: 2 m and 0.5 m), Connector (M8) Weight (packed state) Pre-wired ...

https://www.ia.omron.com/products/family/407/specification.html

...-SR4[]-S        Models without Reflector: E3T-SR4[]-C *4. Models with robot (bending-resistant) cable are also available with “R” in the model number.        (Example: E3T-ST11R 2M) Small Cyl...

https://www.ia.omron.com/products/family/409/lineup.html

...nce prevention Response time Operate or reset: 1 ms max. Connection method Terminal block input cable pullout (standard cable length: 2 m) Weight (packed state) Approx. 80 g Material...

https://www.ia.omron.com/products/family/423/specification.html

... E2EQ-X10D1-M1GJ 0.3M Accessories (Order Separately) Sensor I/O Connectors (M12, Sockets on One Cable End) (Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be s...

https://www.ia.omron.com/products/family/452/lineup.html

...kHz Control output Load current 3 to 100 mA Residual voltage *3 5 V max. (Load current: 100 mA, Cable length: 2 m) Operation mode (with sensing object approaching) Load ON: NO; For details, r...

https://www.ia.omron.com/products/family/452/specification.html

...5 to 100 mA, Y1 Models: 5 to 300 mA Residual voltage E1 Models: 2 V max. (Load current: 200 mA, Cable length: 2 m) Y1 Models: Refer to Engineering Data on Data Sheet. D1 Models: 3 V max. (Loa...

https://www.ia.omron.com/products/family/453/specification.html

...output Load current 3 to 50 mA max. Residual voltage 3 V max. (under load current of 50 mA with cable length of 1 m) Indicators [][]1 Models: Operation indicator (orange), Setting indicator (...

https://www.ia.omron.com/products/family/459/specification.html

...rrent 200 mA max. 5 to 200 mA (resistive load) Residual voltage 2 V max. (Load current: 200 mA, Cable length: 2 m) Refer to Engineering Data on Data Sheet Indicators Detection indicator (red)...

https://www.ia.omron.com/products/family/470/specification.html