...lotted in graphs to provide this data. Use this data only as a guide. Relays are mass-produced, so allowances must be made for a certain amount of variation in measurement data. 2. The data s...

https://www.omron.com.tw/data_pdf/cat/g6b-4__nd_g3s4_ds_e_4_1_csm1057979.pdf

... is connected to two or more Timers, the input terminals of those Timers must be wired properly so that they will not differ in phase, otherwise the terminals will be short-circuited to one a...

https://www.omron.com.tw/data_pdf/cat/h3cr_l084-e1_3_6_csm1013792.pdf

...t •The transistor output of the H7CC is isolated from the internal circuitry by a photocoupler, so the transistor output can be used as both NPN and PNP output. •The diode connected to the co...

https://www.omron.com.tw/data_pdf/cat/h7cc_m094-e1_2_10_csm1106903.pdf

...sier to understand, and the present value display can be switched between red, green and orange so that output status can be seen from a distance. Note: The H5CX-A11 and H5CX-L8 Timers have o...

https://www.omron.com.tw/data_pdf/cat/h7cc_m095-e1_3_1_csm1106892.pdf

...open-collector output of the K7L-U/UB is isolated from the internal circuits by a photocoupler, so you can use either an NPN open- collector output or a PNP (equivalent) output. K7L-UD/UDB K7...

https://www.omron.com.tw/data_pdf/cat/k7l_n211-e1_6_6_csm1050158.pdf

...terminals. •Connect a branch circuit breaker between the voltage input terminals and the wiring so that the power supply can be turned OFF immediately. •For safety, always work with the power...

https://www.omron.com.tw/data_pdf/cat/km-n2_km-n3_n213-e1_3_13_csm1050147.pdf

...ealing machine, temperature sensors can often be located too far away from the sealing surface, so a difference occurred between the temperature of the sealing surface and the temperature tha...

https://www.omron.com.tw/data_pdf/cat/nx-htc_nx-tc_ej1_e5dc-b_h237-e1_2_2_csm1124888.pdf

...tal Filter This function sets the time constant applied to the first-order lag operation filter so that the noise components mixed with the measured value are eliminated. All models Measuring...

https://www.omron.com.tw/data_pdf/cat/nx-tc_nx-htc_h229-e1_2_2_csm1061207.pdf

... When you use any ferrules other than those in the above table, crimp them to the twisted wires so that the following processed dimensions are achieved. Using Twisted Wires/Solid Wires If you...

https://www.omron.com.tw/data_pdf/cat/nx-ts_hb_ds_e_4_2_csm1057423.pdf

...體的安全功能等安全控制程式。 工程間也使用CIP Safety連鎖，透過全系統建構安全控制網路。 工程2 NX-CSG320 NX-SL5500 NX-SI/SO NX-CSG320 NX-SL5700 GI-SMD1624 EtherNet/IP & CIP Safety 硬體配線工程1 ...

https://www.omron.com.tw/data_pdf/cat/nx1_safety_sgfm-087_tw_1_9.pdf

...ning. If the input is connected to a UPS, do not connect a UPS with a square-wave output. Doing so will cause the internal temperature of the product to increase, possibly causing smoking or ...

https://www.omron.com.tw/data_pdf/cat/s8vk-w_t219-e1_5_1_csm1066917.pdf

... product is the industry’s smallest*1 and is mountable in two ways (vertical and horizontal)*2, so you can use space efficiently to downsize and save space on your control panels. •Push-In Pl...

https://www.omron.com.tw/data_pdf/cat/xw2k_g152-e1_1_6_csm1118894.pdf

... relay, or solenoid) in the system. Separate the unit from devices generating surges. Not doing so may cause result in unexpected operation in the system. Terminal Arrangement Current Input 2...

https://www.omron.com.tw/data_pdf/mnu/cj1w-ad042_-da042v_inst-1167019-3a.pdf

...C, maximum 24 of the input circuits shall be connected or the input circuitry shall be designed so that a maximum of 24 inputs can be energized at a time. XW2Z connector cable and XW2B connec...

https://www.omron.com.tw/data_pdf/mnu/cj1w-id2___od2___(iowiringdiagram)_inst-2102435-4b.pdf

...utions ! WARNING Do not attempt to take any Unit apart while the power is being supplied. Doing so may result in electric shock. ! WARNING Do not touch any of the terminals or terminal blocks...

https://www.omron.com.tw/data_pdf/mnu/cp1w-adb21_-dab21v_-mab221(safetyprecautions)_inst-4029655-1a.pdf

...utions ! WARNING Do not attempt to take any Unit apart while the power is being supplied. Doing so may result in electric shock. ! WARNING Do not touch any of the terminals or terminal blocks...

https://www.omron.com.tw/data_pdf/mnu/cp1w-adb21_-dab21v_-mab221(safetyprecautions)_inst-4031560-2b.pdf

...ing CAUTION WARNING Never attempt to disassemble any Units while power is being supplied. Doing so may result in serious electrical shock or electrocution. Indicates a potentially hazardous s...

https://www.omron.com.tw/data_pdf/mnu/cs1w-v600c1__cj1w-v600c1__inst-1124379-1d.pdf

...utions ! WARNING Do not attempt to take any Unit apart while the power is being supplied. Doing so may result in electric shock. ! WARNING Do not touch any of the terminals or terminal blocks...

https://www.omron.com.tw/data_pdf/mnu/cs1w_cj1w-scu_-sbc(safetyprecautions)_inst-0675639-0d.pdf

...utions ! WARNING Do not attempt to take any Unit apart while the power is being supplied. Doing so may result in electric shock. ! WARNING Do not touch any of the terminals or terminal blocks...

https://www.omron.com.tw/data_pdf/mnu/cs1w_cj1w-scu_-sbc_(safetyprecautions)_inst-0675497-4d.pdf

...Cautions WARNING Do not attempt to take any Unit apart while the power is being supplied. Doing so may result in electric shock. WARNING Do not touch any of the terminals or terminal blocks w...

https://www.omron.com.tw/data_pdf/mnu/csseries(cs1w-pts51)(safetyprecautions)_inst-1618379-7b.pdf