...配器 ： 约10g 保护等级 正面： IP66、背面外壳： IP20、端子部： IP00 存储器保护 非易失性存储器(写入次数 ： 100万次) 设定工具 CX-Thermo Ver.4.61以上 设定工具用端口 E5CC-T的E面： 使用ESB　EEEE电E...

https://www.fa.omron.com.cn/products/family/3288/specification.html

...器：约4g×2个 保护等级 正面： IP66、背面外壳： IP20、端子部： IP00 存储器保护 非易失性存储器(写入次数：100万次) 设定工具 CX-Thermo Ver.4.61以上 设定工具用端口 E5EC-T/E5AC-T的顶面： 使用USB-串...

https://www.fa.omron.com.cn/products/family/3289/specification.html

...载荷2.0 kg 0.37秒∗1、0.52秒∗2 0.42秒 1、0.59秒∗2 有效载荷4.0 kg 0.41秒∗1、0.58秒∗2 有效载荷6.0 kg 0.43秒∗1、0.61秒∗2 电源要求 DC 24 V：11 A (eAIB、SmartController) AC 200～240 V：10 A，单相 ...

https://www.fa.omron.com.cn/products/family/3513/specification.html

... 美式/ 欧式插头 97-000012-01 7 QX-1 M12至智能照明 电源和闪光灯控制电缆 QX-1上的M12插头至灯 上的5针插座 3米 - 连续功率 61-000204-02 3米 - 闪光灯控制 61-000218-02 8 欧姆龙Microscan 智...

https://www.fa.omron.com.cn/products/family/3702/lineup.html

...6 SDV-FM6 SDV-FH6 AC200/220V SDV-FL7 SDV-FM7 SDV-FH7 注1. 控制电源AC120V、AC240V也可制造。 AC120V的型号为SDV-□□61。 AC240V的型号为SDV-□□71。 2. 关于三相电压请咨询本公司。 带定时器功能单动作型...

https://www.fa.omron.com.cn/products/family/847/lineup.html

...5 4.2 5.8 5.6 9.2 48 41 52 1180 930 20.4 26 27.3 45.5 100/110 17/19 22/24.5 5750 4500 81.6 92.5 61.4 96.5 200/220 8.6/9.5 41590 23200 18000 340 380 158 250 额定电压(V) 动作电压 (V) 复位电 压 ...

https://www.fa.omron.com.cn/products/family/959/specification.html

...less otherwise specified. Sensors E3Z-G61 E3Z-G62 E3Z-G81 E3Z-G82 * On the other side Note: E3G-61/G81: 1-axis models (S1)          E3G-62/G82: 2-axis models (S1, S2) *S1 output: Black *S2 ou...

https://www.omron-ap.co.nz/products/family/1168/dimension.html

...o 22 beams: 45 mA max., 26 to 42 beams: 50 mA max., 46 to 62 beams: 56 mA max., 66 to 82 beams: 61 mA max., 86 to 102 beams: 67 mA max. NPN output Emitter: Up to 22 beams: 52 mA max., 26 to 4...

https://www.omron-ap.co.nz/products/family/1581/specification.html

...munity Conforms to IEC 61000-4-4 2 kV (applied to PLC power supply). Vibration resistance 10 to 61.2 Hz with single-amplitude of 0.1 mm,61.2 to 150 Hz and 14.7 m/s 2 in X,Y,and Z dir...

https://www.omron-ap.co.nz/products/family/1781/specification.html

...0PCJ 333 2.59 90 556 7.29 (6.89) 5.00× 10 -6 441 220 0.70 1/15 VRXF15B100PCJ 200 4.13 86 333 11.61 (10.97) 5.70× 10 -6 588 294 0.90 1/25 VRXF25B100PCJ 120 6.88 86 200 19.35 (18.28) 5.50× 10 -...

https://www.omron-ap.co.nz/products/family/1956/specification.html

...therNet/IP Unit. Network Configurator version 3.74a or higher is included with CX-One version 4.61 or higher. The Network Configurator provides the following functions for building, setting, ...

https://www.omron-ap.co.nz/products/family/1994/specification.html

...9 62.4 With brake kW/s 9.4 18.7 25.3 37.8 Mechanical time constant Without brake ms 1.43 1.03 0.61 0.48 With brake ms 1.54 1.09 0.70 0.52 Electrical time constant ms 0.82 0.91 3.0 3.4 Allowab...

https://www.omron-ap.co.nz/products/family/2611/specification.html

...9 62.4 With brake kW/s 9.4 18.7 25.3 37.8 Mechanical time constant Without brake ms 1.43 1.03 0.61 0.48 With brake ms 1.54 1.09 0.70 0.52 Electrical time constant ms 0.82 0.91 3.0 3.4 Allowab...

https://www.omron-ap.co.nz/products/family/2627/specification.html

...9 62.4 With brake kW/s 9.4 18.7 25.3 37.8 Mechanical time constant Without brake ms 1.43 1.03 0.61 0.48 With brake ms 1.54 1.09 0.70 0.52 Electrical time constant ms 0.82 0.91 3.0 3.4 Allowab...

https://www.omron-ap.co.nz/products/family/2644/specification.html

...35% to 85%RH Drip-proof 35% to 95%RH Weight Approx. 22 to 58 g Approx. 42 to 48 g Approx. 34 to 61 g *1. The values are for the plunger models. (For the lever models, the values are at the pl...

https://www.omron-ap.co.nz/products/family/289/specification.html

...er of connected nodes Must meet specifications of the CC-Link Master Unit. Remote stations 1 to 61 (Four station numbers are allocated starting from the specified station number.) Error contr...

https://www.omron-ap.co.nz/products/family/2892/specification.html

...4 Note: CX-Thermo version 4.5 or higher is required for the E5CC.           CX-Thermo version 4.61 or higher is required for the E5CC-U.           CX-Thermo version 4.65 or higher is required...

https://www.omron-ap.co.nz/products/family/3101/lineup.html

...o version 4.5 or higher E5CC-B: CX-Thermo version 4.65 or higher *7 E5CC-U: CX-Thermo version 4.61 or higher Setup Tool port E5CC/E5CC-B/E5CC-U top panel: An E58-CIFQ2 USB-Serial Conversion C...

https://www.omron-ap.co.nz/products/family/3101/specification.html

... *2. If you use the D4SL-NK5 turned over, the operation key insertion position is 60.3 min. and 61.2 max. last update: December 2, 2024...

https://www.omron-ap.co.nz/products/family/3125/dimension.html

...required, use these CTs. CX-Thermo Support Software Model EST2-2C-MV4 Note: CX-Thermo version 4.61 or higher is required for the E5EC-T/E5AC-T.           For the system requirements for the C...

https://www.omron-ap.co.nz/products/family/3287/lineup.html