GlobalIAグローバル検索結果
| IAグローバル検索 |
前へ
CJ1W-MD CJ-series Mixed I/O Units/Features | OMRON...... times can be set to between 0 and 32 ms in the Setup in the CPU Unit. • Mixed I/O Units with 5-V TTL inputs are also available. * • A wide variety of Connector-Terminal Block Conversion Unit...
- S8V-CP DC Electronic Circuit Protector (24 VDC 4 O...
...310. For the UL Class 2 output, the voltage, current, and power are provided as follows: ● DC30 V or lower of output voltage ● 8 A or lower of output current ● 100 VA or lower of output power...
- K7GE-MG Insulation Resistance Monitoring Device/Fe...
...not require manual tasks. Reduced risk of equipment failure due to measurement with fixed DC 50 V Conventional measurement with a typical Megohmmeter requires selecting a voltage range in acc...
- S8T-DCBU-02 Buffer Block/Features | OMRON Industri...
...2024 • Provides a backup time of 500 ms at an output current of 2.5 A. • Can be wired to the 24-V output from the S8VS Supplies. • Connects to an S8TS Power Supply via an S8T-BUS03 Bus Line C...
- CJ1W-MD CJ-series Mixed I/O Units/Features | OMRON...
... times can be set to between 0 and 32 ms in the Setup in the CPU Unit. • Mixed I/O Units with 5-V TTL inputs are also available. * • A wide variety of Connector-Terminal Block Conversion Unit...
- KM50-C Smart Power Monitor/Features | OMRON Indust...
...voltage and power factor, so the accuracy specifications do not apply. * Set the voltage to 100 V when performing simple measurements on a single-phase, three-wire power supply. Incorrect Wir...
- KM50-E Smart Power Monitor/Features | OMRON Indust...
...ctions That Support Installation and Settings Direct Measurement of Three-phase, Four-wire, 400-V Line Voltage Measurement is possible for single-phase two-wire, single-phase three-wire, thre...
- S8V-CP DC Electronic Circuit Protector (24 VDC 4 O...
...310. For the UL Class 2 output, the voltage, current, and power are provided as follows: ● DC30 V or lower of output voltage ● 8 A or lower of output current ● 100 VA or lower of output power...
- K7GE-MG Insulation Resistance Monitoring Device/Fe...
...not require manual tasks. Reduced risk of equipment failure due to measurement with fixed DC 50 V Conventional measurement with a typical Megohmmeter requires selecting a voltage range in acc...
- KM-PM Power Monitor/Features | OMRON Industrial Au...
...y 2025, according to our research. For EtherNet/IP™ compatible models and systems measuring 400 V. Compatible with multiple circuits, allowing minimization of wiring and equipment Multi-circu...
- S8T-DCBU-02 Buffer Block/Features | OMRON Industri...
...2024 • Provides a backup time of 500 ms at an output current of 2.5 A. • Can be wired to the 24-V output from the S8VS Supplies. • Connects to an S8TS Power Supply via an S8T-BUS03 Bus Line C...
- CJ1W-MD CJ-series Mixed I/O Units/Features | OMRON...
... times can be set to between 0 and 32 ms in the Setup in the CPU Unit. • Mixed I/O Units with 5-V TTL inputs are also available. * • A wide variety of Connector-Terminal Block Conversion Unit...
- KM50-C Smart Power Monitor/Features | OMRON Indust...
...voltage and power factor, so the accuracy specifications do not apply. * Set the voltage to 100 V when performing simple measurements on a single-phase, three-wire power supply. Incorrect Wir...
- KM50-E Smart Power Monitor/Features | OMRON Indust...
...ctions That Support Installation and Settings Direct Measurement of Three-phase, Four-wire, 400-V Line Voltage Measurement is possible for single-phase two-wire, single-phase three-wire, thre...
- S8V-CP DC Electronic Circuit Protector (24 VDC 4 O...
...310. For the UL Class 2 output, the voltage, current, and power are provided as follows: ● DC30 V or lower of output voltage ● 8 A or lower of output current ● 100 VA or lower of output power...
- K7GE-MG Insulation Resistance Monitoring Device/Fe...
...not require manual tasks. Reduced risk of equipment failure due to measurement with fixed DC 50 V Conventional measurement with a typical Megohmmeter requires selecting a voltage range in acc...
- KM-PM Power Monitor/Features | OMRON Industrial Au...
...y 2025, according to our research. For EtherNet/IP™ compatible models and systems measuring 400 V. Compatible with multiple circuits, allowing minimization of wiring and equipment Multi-circu...
- S8T-DCBU-02 Buffer Block/Features | OMRON Industri...
...2024 • Provides a backup time of 500 ms at an output current of 2.5 A. • Can be wired to the 24-V output from the S8VS Supplies. • Connects to an S8TS Power Supply via an S8T-BUS03 Bus Line C...
- CJ1W-MD CJ-series Mixed I/O Units/Features | OMRON...
... times can be set to between 0 and 32 ms in the Setup in the CPU Unit. • Mixed I/O Units with 5-V TTL inputs are also available. * • A wide variety of Connector-Terminal Block Conversion Unit...
- KM50-C Smart Power Monitor/Features | OMRON Indust...
...voltage and power factor, so the accuracy specifications do not apply. * Set the voltage to 100 V when performing simple measurements on a single-phase, three-wire power supply. Incorrect Wir...
制御機器商品情報
商品カテゴリ毎の概要・情報。
Top of page
OMRON Corporation