GlobalThe conventional motor condition check had several check items. Therefore a skilled maintenance engineer was required to judge the motor's maintenance timing. Additionally, inspection was time-consuming because there were many motors.
K6CM
Motor Condition Monitoring Device
Quantifying the status of a three-phase induction motor and pump. The alarm output threshold default is set. You can customize the value according to the site. As for comprehensive current diagnosis, the degradation can be detected comprehensively by combining each motor part and the load side. The insulation resistance of the three-phase induction motor and pump can be measured with current flowing (the secondary side leakage current of the inverter can also be detected).
about this Product Family
Related Contents
- Power Supplies / In Addition
- Condition Monitoring Device
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: June 1, 2018
No need for time-consuming patrol inspection or expertise.
K6CM informs you of the motor's maintenance timing.
[Problems]
It's difficult to prevent motor issues caused by degradation.
Example of patrol inspection items
Motor failure mode
[Solution from OMRON]
Motors can be maintained in advance of failure due to degradation.
K6CM (comprehensive current diagnosis type) can consistently monitor motor conditions by observing the current waveform of the motor.
Additionally, you can understand the motor's maintenance timing without depending on an engineer, because K6CM provides threshold value setting.
What is comprehensive current diagnosis?
When an abnormality occurs in the load such as rotary shaft or reducer, the motor does not rotate smoothly and a distortion occurs in its current waveform.
K6CM measures its distortion as a degradation level.
With a factory floor signal light
With an office PC
With the accessory software "Motor Condition Monitoring Tool", you can monitor motor conditions remotely.
* The screen is a sample image.
Monitors the 3-phase induction motor which is the driving force of every facility.
last update: June 1, 2018
Top of Page
© Copyright OMRON Corporation 2007 - 2018. All Rights Reserved.