Page top

CompoNet

Open Network for High-Speed Control

CompoNet

CompoNet offers the ideal mix of high speed, ample capacity, and ease-of-use needed to let you build the best machine.

CompoNet Master Units

Name Appearance Specifications Number
of unit
numbers
allocated
Power
consumption (A)
Model Stand-
ards
Type of Model
Standards
communications
Maximum number of I/O
points per Master Unit
5-V
sys-
tem
24-V
sys-
tem
26-V
sys-
tem
CJ1
Special
I/O Unit
*
1782_lu_1_1
Remote I/O
communications
Message
communications
Word Slave Units: 1,024
inputs and 1,024 outputs
(2,048 I/O points total)
Bit Slave Units: 256 inputs
and 256 outputs (512 I/O
points total)
1, 2, 4,
or 8
0.4 --- CJ1W-CRM21 CE, U,
U1, L, N
CS1
Special
I/O Unit
*
1782_lu_1_2
Remote I/O
communications
Message
communications
Word Slave Units: 1,024
inputs and 1,024 outputs
(2,048 I/O points total)
Bit Slave Units: 256 inputs
and 256 outputs (512 I/O
points total)
1, 2, 4,
or 8
0.4 --- CS1W-CRM21 CE, U,
U1, L, N

* These Units are also available with a DCN-TB4 Terminal Conversion Adapter included in the package. Add "(-B)" to the
   end of the model number to receive the Adapter as well.

CompoNet Master Board

Name Appearance Specification Model Standards
PCI Bus type
1782_lu_2_1
PCI bus Rev2.2 5V 3G8F7-CRM21 CE
CompactPCI Bus type
1782_lu_2_2
PICMG 2.0 R3.0 5V 32-Bit 3U 3G8F8-CRM21

CompoNet Gateway Units

CompoNet Gateway Unit for CC-Link

Name Appearance Model Standards
CompoNet
Gateway Unit for CC-Link
1782_lu_3_1
GQ-CRM21 CE, UI, C

CompoNet Slave Units

Word Slave Units

Digital I/O Slave Units

Name Appearance Specifications Model Standards
Two-tier Screw
Terminal Block
1782_lu_4_1
Inputs 8 inputs NPN --- CRT1-ID08 CE, U, U1, N
PNP CRT1-ID08-1
Outputs 8 outputs NPN CRT1-OD08
PNP CRT1-OD08
Inputs 16 inputs NPN CRT1-ID16 * CE, U, U1, C, N
PNP CRT1-ID16-1 *
Outputs 16 outputs NPN CRT1-OD16 *
PNP CRT1-OD16-1 *
Inputs/
Outputs
8 inputs/
8 outputs
NPN CRT1-MD16 CE, U, U1, N
PNP CRT1-MD16-1
Screw Terminal
Block with Relay
Outputs
1782_lu_4_2
Outputs 8 outputs Contacts --- CRT1-ROS08 CE, UC, UC1, N
16 outputs CRT1-ROS16
Screw Terminal
Block with SSR
Outputs
Outputs 8 outputs SSR CRT1-ROF08 ---
16 outputs CRT1-ROF16
Three-tier Screw
Terminal Block
1782_lu_4_3
Inputs 8 inputs NPN Without Short-circuit
and Disconnected
Line Detection
CRT1-ID08TA CE, UC, UC1
PNP CRT1-ID08TA-1
Outputs 8 outputs NPN CRT1-OD08TA
PNP CRT1-OD08TA-1
Inputs 16 inputs NPN CRT1-ID16TA
PNP CRT1-ID16TA-1
Outputs 16 outputs NPN CRT1-OD16TA
PNP CRT1-OD16TA-1
Inputs/
Outputs
8 inputs/
8 outputs
NPN CRT1-MD16TA
PNP CRT1-MD16TA-1
Inputs 8 inputs NPN With Short-circuit
and Disconnected
Line Detection
CRT1-ID08TAH
PNP CRT1-ID08TAH-1
Outputs 8 outputs NPN CRT1-OD08TAH
PNP CRT1-OD08TAH-1
Inputs 16 inputs NPN CRT1-ID16TAH
PNP CRT1-ID16TAH-1
Outputs 16 outputs NPN CRT1-OD16TAH
PNP CRT1-OD16TAH-1
Inputs/
Outputs
8 inputs/
8 outputs
NPN CRT1-MD16TAH
PNP CRT1-MD16TAH-1
e-CON Connectors
1782_lu_4_4
Inputs 16 inputs NPN Without Short-circuit
and Disconnected
Line Detection
CRT1-ID16S CE, UC, UC1
PNP CRT1-ID16S-1
Outputs 16 outputs NPN CRT1-OD16S
PNP CRT1-OD16S-1
Inputs/
Outputs
8 inputs/
8 outputs
NPN CRT1-MD16S
PNP CRT1-MD16S-1
Inputs 32 inputs NPN CRT1-ID32S
PNP CRT1-ID32S-1
Outputs 32 outputs NPN CRT1-OD32S
PNP CRT1-OD32S-1
Inputs/
Outputs
16 inputs/
16 outputs
NPN CRT1-MD32S
PNP CRT1-MD32S-1
Inputs 16 inputs NPN With Short-circuit
and Disconnected
Line Detection
CRT1-ID16SH
PNP CRT1-ID16SH-1
Outputs 16 outputs NPN CRT1-OD16SH
PNP CRT1-OD16SH-1
Inputs/
Outputs
8 inputs/
8 outputs
NPN CRT1-MD16SH
PNP CRT1-MD16SH-1
Inputs 32 inputs NPN CRT1-ID32SH
PNP CRT1-ID32SH-1
Outputs 32 outputs NPN CRT1-OD32SH
PNP CRT1-OD32SH-1
Inputs/
Outputs
16 inputs/
16 outputs
NPN CRT1-MD32SH
PNP CRT1-MD32SH-1
e-CON Connectors
1782_lu_4_5
Inputs 8 inputs NPN Without Short-circuit
and Disconnected
Line Detection
CRT1-VID08S * CE, UC, UC1
PNP CRT1-VID08S-1 *
Outputs 8 outputs NPN CRT1-VOD08S *
PNP CRT1-VOD08S-1 *
MIL Connector
1782_lu_4_6
Inputs 16 inputs NPN --- CRT1-VID16ML * CE, UC, UC1, N
PNP CRT1-VID16ML-1 *
Outputs 16 outputs NPN CRT1-VOD16ML *
PNP CRT1-VOD16ML-1 *
MIL Connector
1782_lu_4_7
Inputs 32 inputs NPN --- CRT1-VID32ML * CE, UC, UC1, N
PNP CRT1-VID32ML-1 *
Outputs 32 outputs NPN CRT1-VOD32ML *
PNP CRT1-VOD32ML-1 *
Inputs/
Outputs
16 inputs/
16 outputs
NPN CRT1-VMD32ML *
PNP CRT1-VMD32ML-1 *
Clamp Terminal
Blocks
1782_lu_4_8
Inputs 8 inputs NPN --- CRT1-ID08SL U, CE, N
PNP CRT1-ID08SL-1
Outputs 8 outputs NPN CRT1-OD08SL
PNP CRT1-OD08SL-1
Inputs 16 inputs NPN CRT1-ID16SL
PNP CRT1-ID16SL-1
Outputs 16 outputs NPN CRT1-OD16SL
PNP CRT1-OD16SL-1
Inputs/
Outputs
8 inputs/
8 outputs
NPN CRT1-MD16SL
PNP CRT1-MD16SL-1

* These Units are also available with a DCN-TB4 Terminal Conversion Adapter included in the package. Add "(-B)" to the
   end of the model number to receive the Adapter as well.

Analog I/O Slave Units

Name Appearance Specifications Model Standards
Analog I/O Slave Units
1782_lu_5_1
Analog inputs 4 inputs CRT1-AD04 * CE, U, U1, C, N
Analog outputs 2 outputs CRT1-DA02 *
MIL Connector Type
1782_lu_5_2
Analog inputs 4 inputs CRT1-VAD04ML CE, UC, UC1
Analog outputs 2 outputs CRT1-VDA02ML
e-CON Connector Type
1782_lu_5_3
Analog inputs 4 inputs CRT1-VAD04S
Analog outputs 2 outputs CRT1-VDA02S
Analog I/O Slave Units
(Numerical indicator type)
MIL Connector Type
1782_lu_5_4
Analog inputs
(Channel Insulation)
2 inputs CRT1-VAD02MLD CE
Analog outputs 2 outputs CRT1-VDA02MLD
Analog I/O Slave Units
(Numerical indicator type)
e-CON Connector Type
1782_lu_5_5
Analog inputs
(Channel Insulation)
2 inputs CRT1-VAD02SD
Analog outputs 2 outputs CRT1-VDA02SD

* These Units are also available with a DCN-TB4 Terminal Conversion Adapter included in the package. Add "(-B)" to the
   end of the model number to receive the Adapter as well.

Temperature Input Units

Name Appearance Specifications Model Standards
Temperature
Input Units
1782_lu_6_1
Thermocouple Input 4 inputs Switchable between
(R, S, K, J, T, E, B, N, L, U, W, PL2)
CRT1-TS04T CE, UC, UC1, N
Platinum-resistance
thermometer input
PT100 (-200 to 850°C)
PT100 (-200 to 2000°C)
CRT1-TS04P

Expansion Units

Name Appearance Specifications Model Standards
Expansion
Units
1782_lu_7_1
Inputs 8 inputs NPN One Expansion Unit can be
mounted to one CRT1-ID16(-1),
CRT1-OD16(-1), CRT1-ROS16,
or CRT1-ROF16 Digital I/O Slave.
XWT-ID08 CE, UC,
UC1, N
PNP XWT-ID08-1
Outputs 8 outputs NPN XWT-OD08
PNP XWT-OD08-1
Inputs 16 inputs NPN XWT-ID16
PNP XWT-ID16-1
Outputs 16 outputs NPN XWT-OD16
PNP XWT-OD16-1
Expansion
Units
e-CON
Connector
type
--- Digital outputs 8 outputs NPN One Expansion Unit can be
mounted to one CRT1-VAD02[][]D
or CRT1-VDA02[][]D Analog I/O
Slave Unit.
XWT-VOD08S ---
Digital outputs 8 outputs PNP XWT-VOD08S-1
Digital inputs
and outputs
4 inputs/
4 outputs
NPN XWT-VMD08S
Digital inputs
and outputs
4 inputs/
4 outputs
PNP XWT-VMD08S-1
Expansion
Units MIL
Connector
type
--- Digital outputs 16 outputs NPN XWT-VOD16ML
Digital outputs 16 outputs PNP XWT-VOD16ML-1
Digital inputs
and outputs
8 inputs/
8 outputs
NPN XWT-VMD16ML
Digital inputs
and outputs
8 inputs/
8 outputs
PNP XWT-VMD16ML-1

Bit Slave Units

Compact Connectors

Name Appearance Specifications Model Standards
Compact Connectors
1782_lu_8_1
Inputs 2 inputs NPN CRT1B-ID02JS CE
2 outputs PNP CRT1B-ID02JS-1
Outputs 2 inputs NPN CRT1B-OD02JS
2 outputs PNP CRT1B-OD02JS-1
Inputs/Outputs 1 input/1 output NPN CRT1B-MD02JS
1 input/1 output PNP CRT1B-MD02J-1
1782_lu_8_2
Inputs 4 inputs NPN CRT1B-ID04JS
4 outputs PNP CRT1B-ID04JS-1
Outputs 4 inputs NPN CRT1B-OD04JS
4 outputs PNP CRT1B-OD04JS-1
Inputs/Outputs 2 inputs/2 outputs NPN CRT1B-MD04JS
2 inputs/2 outputs PNP CRT1B-MD04JS-1
e-CON connectors
1782_lu_8_3
Inputs 2 inputs NPN CRT1B-ID02S CE, U
PNP CRT1B-ID02S-1
Outputs 2 outputs NPN CRT1B-OD02S
PNP CRT1B-OD02S-1

Repeater Unit

Name Appearance Specifications Model Standards
Repeater
Unit
1782_lu_9_1
A sub-trunk line can be connected downstream
(for trunk-branch line configuration)
or further branching is enabled downstream
(for configurations with no wiring restrictions)
in the same way as for a Master Unit.
A Repeater Unit can be used to branch the trunk line and increase the number
of connected Units, as well as to extend the length of the communications line.
CRS1-RPT01 * CE, U, U1,
L, N

* These Units are also available with a DCN-TB4 Terminal Conversion Adapter included in the package. Add "(-B)" to the
   end of the model number to receive the Adapter as well.

SmartSlice GRT1 Series

CompoNet Communications Unit

Name Appearance Specifications Model Standards
CompoNet Communication Unit
1782_lu_10_1
Up to 64 Slice I/O Units can be connected
(Inputs: 32 bytes maximum, Output: 32 bytes maximum)
GRT1-CRT CE, UC1, L

Slice I/O Units

Name Appearance Specifications Model Standards
Slice
I/O
Units
Digital I/O Units
1782_lu_11_1
4 inputs NPN GRT1-ID4 CE, UC1, L, N
4 inputs PNP GRT1-ID4-1
4 outputs NPN GRT1-OD4
4 outputs PNP GRT1-OD4-1
8 inputs NPN GRT1-ID8 CE, UC, L
8 inputs PNP GRT1-ID8-1
8 outputs NPN GRT1-OD8
8 outputs PNP GRT1-OD8-1
Relay Outputs 2 points GRT1-ROS2 CE, UC1, L, N
AC Input 4 points GRT1-IA4-1 CE, UC1, L
GRT1-IA4-2
Analog I/O Units
1782_lu_11_2
Analog inputs (current/voltage) GRT1-AD2 CE, UC1, L
Analog outputs (current) GRT1-DA2C
Analog output (voltage) GRT1-DA2V
Temperature Input
(Resistance
Thermometers)
1782_lu_11_3
Temperature input (Resistance thermometer:Pt100) 2 points GRT1-TS2P CE, UC1, L
Temperature input (Resistance thermometer:Pt1000) 2 points GRT1-TS2PK
Thermocouple Input 2 points GRT1-TS2T CE, UC, L
Counter Units
1782_lu_11_4
Counter inputs: 1, External outputs: 1 NPN GRT1-CT1 CE, UC, L
Counter inputs: 1, External outputs: 1 PNP GRT1-CT1-1

System Units

Name Appearance Specifications Model Standards
System
Units
Turnback Units
1782_lu_12_1
Right Turnback Unit (Mounts to the right side of Slice I/O
Terminal.)
GRT1-TBR CE, UC1, L, N
1782_lu_12_2
Left Turnback Unit (Mounts to the left side of Slice I/O
Terminal. Can supply power to I/O Units.)
GRT1-TBL
Turnback Cable *1 --- 1 m GCN2-100 UC, CE, L, N
I/O Power Feed
Unit
1782_lu_12_3
Use when the total current consumption of the I/O
Power Supply exceeds 4 A, or to make the I/O Power
Supply a separate system.
GRT1-PD2 CE, UC1, L, N
GRT1-PD2G CE, UC, L
GRT1-PD8
GRT1-PD8-1
Use to add V/G terminals for I/O power supply. GRT1-PC8
GRT1-PC8-1
End Unit *2
1782_lu_12_4
Necessary for terminating the Slice I/O Terminal. GRT1-END CE, UC1, L, N
Option Terminal Block --- Package of 5 Terminal Blocks GRT1-BT1-5 ---

*1 Use the Turnback Cable together with the Turnback Units.
*2 The End Unit is sold separately. It is not provided with the Communications Unit.

Sensor Communications Unit

Name Appearance I/O
classification
Allocated
bits
Internal circuit
power supply
I/O Power
supply
voltage
Connected
Controller
model
Model Stand-
ards
Sensor
Communications
Unit
1782_lu_13_1
Input and
output
160 bits
max.
Supplied along
with
communications
power
24 VDC ZS-LDC[][]
ZS-MDC[][]
ZS-HLDC[][]
ZFV-CA[][]
ZS-CRT CE
1782_lu_13_2
Change by operation mode E3X-HD0
E3X-MDA0
E3X-DA0-S
E3C-LDA0
E2C-EDA0
E3X-CRT

Multi-function Compact Inverter

Name Appearance Mountable Inverter Model Standards
For MX2
CompoNet
Communication Unit
1782_lu_14_1 Multi-function Compact Inverter
MX2-Series
3G3AX-MX2-CRT-E U, CE
For RX-V1
CompoNet
Communication Unit
1782_lu_14_2 High-function
General-purpose Inverter
RX-Series V1 type
3G3AX-RX-CRT-E

Support Software

Product
name
Specifications Model Stand-
ards
Number of
licenses
Media
FA
Integrated
Tool
Package
CX-One
Ver.4.[]
The CX-One is a package that integrates the
Support Software for OMRON PLCs and
components. CX-One runs on the following OS.
OS: Windows XP (Service Pack 3 or higher, 32-bit
version)/Windows Vista (32-bit/64-bit version)/
Windows 7 (32-bit/64-bit version)/Windows 8 (32-
bit/64-bit version)/Windows 8.1 (32-bit/64-bit
version)/Windows 10 (32-bit/64-bit version)

CX-One Ver.4.[] includes CX-Integrator
For details, refer to the CX-One catalog (Cat.
No. R134).
1 license
*
DVD CXONE-AL01D-V4 ---

* Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.

Peripheral Devices

Communications Cables

Name Appearance Specification Model Standards
Flat Cable I
1782_lu_16_1
4-conductor flat cable (UL2555)
Length: 100 m
Conductor diameters: 0.75 mm2 × 2, 0.5 mm2 × 2
DCA4-4F10 UC

Note. Also can be used with general-purpose round cable I (VCTF 2-conductor cable).

For Flat Cable I

Name Appearance Specification Model Standards
Flat
Connector
Socket
1782_lu_17_1 Use this Connector in a set with a DCN4-BR4 Flat Connector Plug for the
following applications.
Extending the trunk line or a sub-trunk line
T-branching from the trunk line or a sub-trunk line
T-branching a sub-branch line from a branch line
DCN4-TR4 * C, UC
Use this Connector independently for the following applications.
Used when connecting a DCN4-TM4 Terminating Resistor to the end of
the trunk line or a sub-trunk line.
Flat
Connector
Plug
1782_lu_17_2 Use this Connector in a set with a DCN4-TR4 Flat Connector Socket for
the following applications.
Extending the trunk line or a sub-trunk line
T-branching from the trunk line or a sub-trunk line
T-branching a sub-branch line from a branch line
DCN4-BR4 *
Use this Connector independently for the following applications.
Connecting Communications Cable to a Unit
Connecting Communications Cable to a DCN4-MD4 Multidrop Connector
(when a multidrop connection is used)
Multidrop
Connector
1782_lu_17_3 Use Multidrop Connectors for multi-drop wiring of Slave Units or Repeater
Units to trunk lines, sub-trunk lines, or branch lines.
DCN4-MD4 *
Multidrop
Connector Plug
1782_lu_17_4 Connecting Communications Cable to a Unit in a multidrop connection
This connector can be used with the following Units:Bit Slave Units with
Compact Connectors (CRT1B-[]D0[]JS(-1))
DCN4-MR4 ---
Terminating
Resistance
1782_lu_17_5 This is a Connector-type Terminating Resistor for Flat Cable l or Round
Cable lI. It is connected to a DCN4-TR4 Flat Connector Socket at the
end of a trunk line or sub-trunk line.
DCN4-TM4 * C, UC
Special Tools 1782_lu_17_6 This is the crimping tool for the following connectors:
DCN4-TR4(-1) Flat Connector Socket
DCN4-BR4 Flat Connector Plug
DCN4-BR4D Conversion Connector for Standard Thin Cable and Flat Cable
DCN4-SF4D Connector for Flat Cable
DWT-A01 ---

Note. Multidrop Connectors (DCN4-MD4) are not connectable with Bit Slave Units with Compact Connectors, Use
          Multidrop Connector Plugs (DCN4-MR4) instead.
* The minimum quantity packaged is 10 Connectors. Order the Connectors in multiples of 10.

For Round Cable I

Name Appearance Application Model Standards
Open Type
Connector (for
connecting Units)
1782_lu_18_1
Converts the Unit's communications connector into a screw terminal
block to enable connecting round cable to a Slave Unit or Repeater Unit.
DCN4-TB4 * UC
Terminating
Resistor
1782_lu_18_2
This is a Terminal Block-type Terminating Resistor for Round cable I or
Round cable II. It is connected to the end of a trunk line or sub-trunk
line round cable.
DRS1-T UC

Note: The DCN4-TB4 Multidrop Connector cannot be used with Bit Slaves with Compact Connectors. Use Open Type
          Connector (for Unit connection) HCN-TB4LMZG+ from Honda Tsushin Kogyo Co., Ltd. Tel:+81-52-242-2111
* The minimum quantity packaged is 10 Connectors. Order the Connectors in multiples of 10.

For Round Cable II

Name Appearance Application Model Standards
Open Type
Connector (for
connecting Units)
1782_lu_19_1 Converts the Unit's communications connector into a screw terminal
block to enable connecting round cable to a Slave Unit or Repeater Unit.
DCN4-TB4 * UC
Flat Connector
Socket
1782_lu_19_2 Use this Connector in a set with a DCN4-BR4 Flat Connector Plug for
the following applications.
Extending the trunk line or a sub-trunk line
T-branching from the trunk line or a sub-trunk line
T-branching a sub-branch line from a branch line
DCN4-TR4 * UC
Use this Connector independently for the following applications.
Used when connecting a DCN4-TM4 Terminating Resistor to the end of
the trunk line or a sub-trunk line.
Terminating
Resistance
1782_lu_19_3 This is a Connector-type Terminating Resistor for Flat Cable I or Round
cable II. It is connected to a DCN4-TR4 Flat Connector Socket at the
end of a trunk line or sub-trunk line.
DCN4-TM4 * UC
1782_lu_19_4 This is a Terminal Block-type Terminating Resistor for Round cable I or
Round cable II. It is connected to the end of a trunk line or sub-trunk
line round cable.
DRS1-T UC
Special Tools 1782_lu_19_5 This is the crimping tool for the following connectors:
DCN4-TR4(-1) Flat Connector Socket
DCN4-BR4 Flat Connector Plug
DCN4-BR4D Conversion Connector for Standard Thin Cable and Flat Cable
DCN4-SF4D Connector for Flat Cable
DWT-A02 ---

Note. The DCN4-TB4 Multidrop Connector cannot be used with Bit Slaves with Compact Connectors. Use Open Type
          Connector (for Unit connection) HCN-TB4LMZG+ from Honda Tsushin Kogyo Co., Ltd. Tel:+81-52-242-2111
* The minimum quantity packaged is 10 Connectors. Order the Connectors in multiples of 10.

Mounting Bracket

Name Appearance Application Model Standards
Mounting
Bracket
--- Unit with e-CON Connectors: For CRT1-V[]D08S(-1)/VAD04S/VDA02S CRT1-ATT02 ---
Unit with MIL Connectors: For CRT1-V[]D016ML(-1)/VAD04ML/VDA02ML CRT1-ATT01
Unit with MIL Connectors: For CRT1-V[]D32ML(-1) SRT2-ATT02
Bit Slaves with Compact Connectors:
For CRT1B-[]D02JS(-1), CRT1B-[]D04JS(-1)
CRT1-ATT03