...cifies the operating conditions that are required at various ambient operating temperatures and load rates to ensure that Power Supply specifications are met....
...ting Definition The appropriate product category Limit Switches The basic current, voltage, and load conditions used as a standard when using a Switch....
...ves the change in durability for specific electrical usage conditions such as current, voltage, load, etc. in graph format. The durability depends on test conditions, so the data is for refer...
...duct category Power Supplies Remote sensing can be used to compensate for a voltage drop on the load lines. (The compensation range is ±10% of the rated output voltage.)...
...he deviation between the process value and the set value. The normal set value is at 50% of the load rate. With only proportional control, the process value and set value will not be balanced...
...emperature Controller is generally small and not sufficient for driving a heater or other large load. The output is thus used with an external electromagnetic contactor....
...ategory Temperature Controllers A method for controlling the time that power is supplied to the load. Phase angle control enables changing the phase angle of an AC voltage applied to a ...
...sic Switches A switch with a plunger that has a larger plunger diameter than a pin plunger. The load must be aligned with the center of the plunger to prevent eccentricity when the switch is ...
...dustrial Automation regenerative energy Definition The appropriate product category Inverters A load connected to a motor has kinetic energy while it rotates and has potential energy while it...