...Switch Offers Choice of Many Actuators Miniature Limit Switch D4CC Many Models Including Roller Lever Switches are Only 16-mm Thick with Connector General-purpose Limit Switch HL-5000 Economi...

https://www.ia.omron.com/products/category/switches/limit-switches/general-purpose-vertical/

...mber Description D4N-1120 Safety Limit Switch, PG13.5, 1-conduit, 1NC/1NO (snap-action), Roller lever (resin lever, resin roller) D4N-1122 Safety Limit Switch, PG13.5, 1-conduit, 1NC...

https://www.ia.omron.com/products/family/1497/itemlist/

...Unit have been properly mounted can be detected from the open/closed state of the contact (Lock-lever-linked contact function).* * All contacts are interlocked with the lock lever. (...

https://www.ia.omron.com/products/family/1111/

... set using the adjustment dial. According with that, the operating distance between the release lever and shifter is set. On the other hand, the current flows through the heater that composin...

https://www.ia.omron.com/support/guide/753/introduction.html

...-S General-purpose Relays General-purpose Relays MK-S New Super MK Relays. Models with Latching Lever Added to the Series. Displaying individual registered product index. Select and click for...

https://www.ia.omron.com/products/family/1938/itemlist/

...imit Switches Lead Contents FAQ No. FAQ02077 Related Contents Primary Contents Question Can the lever of a WL General-purpose Limit Switch be mounted on WLF2 Explosion-proof Limit Switch? Ans...

https://www.ia.omron.com/support/faq/answer/30/faq02077/

...tents Question Can the actuator of WL Limit Switch be mounted on other Limit Switches? Answer  Lever actuators can be mounted on the following models. Applicable models: HL Limit Switch, D4C...

https://www.ia.omron.com/support/faq/answer/30/faq02203/

...ferences between WL[][]-2 Limit Switch and WL[][]-2N Limit Switch ? Answer  The WL[][]-2 has a lever with 90 ° operation to each side, with one-side operation not possible, and a Head that c...

https://www.ia.omron.com/support/faq/answer/30/faq02993/

...on TZ-1G High-temperature Basic Switch, Pin plunger TZ-1GV High-temperature Basic Switch, Hinge lever TZ-1GV2 High-temperature Basic Switch, Hinge roller lever TZ-1GV22 High-temperat...

https://www.ia.omron.com/products/family/293/itemlist/

...c switch, Rated carry current 0.1 A, Contact gap 0.25 mm (high-sensitivity), Short hinge roller lever Z-01HW22-B General-purpose Basic switch, Rated carry current 0.1 A, Contact gap 0.25 mm (...

https://www.ia.omron.com/products/family/289/itemlist/

..., 5 A at 250 VAC/ 4 A at 30 VDC, VCTF oil-resistant cable, 3 m D4C-1220 Enclosed Switch, Roller lever, 5 A at 250 VAC/ 4 A at 30 VDC, VCTF oil-resistant cable, 3 m D4C-1220-P Enclosed Switch,...

https://www.ia.omron.com/products/family/324/itemlist/

...ntact welding or other cause. The following diagram shows an example using a rotating shaft and lever. Note 1: The lever cannot be mounted backwards because the protrusion and notch ...

https://www.ia.omron.com/support/faq/answer/31/faq02315/

...ctors Non-lighted (Color: Only Black is Available) Sealing IP65 (oil-resistant) Appearance Long lever Notches Reset method Model 2 notches Manual A22S-C2M Automatic A22S-C2A 3 notches Manual ...

https://www.ia.omron.com/products/family/1109/lineup.html

...atures Lineup Specifications Dimensions Catalog last update: November 6, 2012 (Unit: mm) Roller lever (Metal lever, resin roller) D4F-[]20-[]R Roller plunger (Metal roller) D4F-[]02-...

https://www.ia.omron.com/products/family/1327/dimension.html

...ction) 2NC (slow-action) 2NC/2NO (slow-action) 4NC (slow-action) Model Model Model Model Roller lever (Metal lever, resin roller) 1 m Horizontal D4F-120-1R D4F-220-1R D4F-320-1R D4F-...

https://www.ia.omron.com/products/family/1327/lineup.html

...n cover and Operation Key D4DS-K2 are already mounted on Slide Key) D4NS mounting tool: 1 Inner lever: 1 Inner lever mounting screws: 2 Door Switch mounting one-way screws: 2 Switch ...

https://www.ia.omron.com/products/family/1465/lineup.html

...ation is        possible with the actual load beforehand. *5. The mechanical durability of fork lever lock models is 10,000,000 operations min. last update: January 20, 2022...

https://www.ia.omron.com/products/family/1497/specification.html

...e specified, a tolerance of ±0.4 mm applies to all dimensions. Switches 1-conduit Models Roller Lever (Resin Lever, Resin Roller) D4N-1[]20R, D4N-2[]20R, D4N-4[]20R, D4N-9[]20R * Adj...

https://www.ia.omron.com/products/family/1498/dimension.html

...1 Conduit D4NH-1[]AS D4NH-2[]AS D4NH-4[]AS Shaft Type with 2 Conduits D4NH-6[]AS D4NH-8[]AS Arm Lever Type with 1 Conduit D4NH-1[]BC D4NH-2[]BC D4NH-4[]BC Arm Lever Type with 2 Condu...

https://www.ia.omron.com/products/family/1501/dimension.html

...NH-4CAS 2-conduit type G1/2 D4NH-6AAS D4NH-6BAS D4NH-6CAS M20 D4NH-8AAS D4NH-8BAS D4NH-8CAS Arm lever 1-conduit type Pg13.5 D4NH-1ABC D4NH-1BBC D4NH-1CBC G1/2 D4NH-2ABC D4NH-2BBC D4NH-2CBC M2...

https://www.ia.omron.com/products/family/1501/lineup.html