...et value and measure the time until the Unit operates. Operating Time Adjust the slide resistor so that the voltage applied to the K8DS terminals is 120% of the set value for overvoltage dete...

https://www.fa.omron.co.jp/data_pdf/cat/k8ds-pm_n192-e1_2_5_csm1020922.pdf

...nd measure the time required for the Relay to operate. Operating Time Adjust the slide resistor so that the voltage applied to the K8DS terminals is 80% of the set value when the auxiliary re...

https://www.fa.omron.co.jp/data_pdf/cat/k8ds-pu_n191-e1_2_6_csm1020921.pdf

...y switch setting. Example: K8DS-PZ1 with Rotary Switch Set to 200 V The rated input is 200 VAC, so the setting range is 10 to 44 V. If you set the setting knob (ASY.) to 10%, the asymmetry op...

https://www.fa.omron.co.jp/data_pdf/cat/k8ds-pz_n194-e1_2_6_csm1020924.pdf

...to 100% of the rated current (i.e., 10 to 100 A). Pass the conductors through the CT five times so that at least 10 A of current flows. The input current to the K8DT will be 25 A (i.e., 5 A x...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-as_n201-e1_1_9_csm1050137.pdf

...to 100% of the rated current (i.e., 10 to 100 A). Pass the conductors through the CT five times so that at least 10 A of current flows. The input current to the K8DT will be 25 A (i.e., 5 A x...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-aw_n202-e1_2_2_csm1050138.pdf

... failure to operate, malfunction, or undesirable effects on product performance. !CAUTION Doing so may occasionally result in minor injury due to electric shock. Do not touch the Relay while ...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-ls_n205-e1_1_8_csm1050141.pdf

...ltage is OFF before starting any wiring work and wire all connections correctly. !CAUTION Doing so may occasionally result in minor injury due to electric shock. Do not touch the Relay while ...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-ph_n206-e1_1_8_csm1050142.pdf

...et value and measure the time until the Unit operates. Operating Time Adjust the slide resistor so that the voltage applied to the K8DT terminals is 120% of the set value for overvoltage dete...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-pm_n207-e1_1_9_csm1050143.pdf

... DIP switch setting. Example: K8DT-PZ1 with DIP switch Set to 200 V The rated input is 200 VAC, so the setting range is 10 to 44 V. If you set the setting knob (ASY) to 10%, the asymmetry ope...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-pz_n208-e1_1_9_csm1050144.pdf

...for general mandatory action precautions for which there is no specified symbol. !CAUTION Doing so may occasionally result in minor injury due to electric shock. Do not touch the Relay while ...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-th_n209-e1_1_7_csm1050145.pdf

...ltage is OFF before starting any wiring work and wire all connections correctly. !CAUTION Doing so may occasionally result in minor injury due to electric shock. Do not touch the Relay while ...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-vs_n203-e1_1_8_csm1050139.pdf

...ltage is OFF before starting any wiring work and wire all connections correctly. !CAUTION Doing so may occasionally result in minor injury due to electric shock. Do not touch the Relay while ...

https://www.fa.omron.co.jp/data_pdf/cat/k8dt-vw_n204-e1_1_10_csm1050140.pdf

... power factors to appropriate levels. • Fixed values are used for the voltage and power factor, so the accuracy specifications do not apply. ● Alarm Output An alarm can be output when active ...

https://www.fa.omron.co.jp/data_pdf/cat/km50-c1-flk_ds_e_1_2_csm1039756.pdf

... into stopped power, standby power, and operating power depending on the power usage conditions so that you can see where energy can be saved. 2) Three-state Energy Classification can be link...

https://www.fa.omron.co.jp/data_pdf/cat/km50-e1-flk_ds_e_1_3_csm1039757.pdf

...erate value and the SET knob for the release value. The Relay will normally be ON, however, and so the internal temperature will rise, and this will affect the product service life. 3 LG2 Dim...

https://www.fa.omron.co.jp/data_pdf/cat/lg2_ds_e_4_3_csm388.pdf

...ed on the OMRON Fleet Manager platform, which is capable of controlling up to 100 mobile robots so users can manage OMRON LD-60/90, LD-250, MD-650, and HD-1500 mobile robots from a single ent...

https://www.fa.omron.co.jp/data_pdf/cat/md-650_i890-e_1_1_csm1126873.pdf

...onsider all needed devices when selecting the power supply, camera cables, Ethernet cables, and so on. * □ : 0 = NPN; 5 = PNP FL-BR9120W-H high brightness model, front/side-mount bar light Re...

https://www.fa.omron.co.jp/data_pdf/cat/mx-z2000h_q255-e1_2_3_csm1059279.pdf

...2025/AL2055/AL4025/AL4055/AL4110 Ground terminal (M5) Terminal screw 6-M K D max. E max. W Ro R So S To T W = Terminal width H max. H1 max. X±1 Y±1 A max. C max. Four, J dia. (Cutout) 27 Mult...

https://www.fa.omron.co.jp/data_pdf/cat/mx2-v2_ds_e_4_1_csm1126864.pdf

...6.4 16.5 11.5 形3G3AX-AL2025/AL2055/AL4025/AL4055/AL4110 接地端子 M5 端子ねじ 6-M K D max. E max. W Ro R So S To T W= 端子幅 H max. H1 max. X±1 Y±1 A max. C max. 4-φJ （キリカキ） お問い合わ...

https://www.fa.omron.co.jp/data_pdf/cat/mx2-v2_ds_j_4_1.pdf

... no specifically required installation orientation, but make sure that the Relays are installed so that the contacts are not subjected to vibration or shock in their movement direction. Using...

https://www.fa.omron.co.jp/data_pdf/cat/my_myk_myq_myh_j219-e1_10_23_csm59.pdf