...sponse frequency 20 Hz max. Power supply voltage (operating voltage range) 24 VDC (21.6 to 26.4 V) with a max. ripple (p-p) 10% Current consumption E4E2-TS50TC1 Emitter: 25 mA max. at 24 VDC ...

https://www.ia.omron.com/products/family/504/specification.html

... insulated 3-conductor VCT cable with a thickness of 0.75 mm 2 and a dielectric strength of 600 V is used together with a Liquid Sensing Band specified by OMRON. (A 0.2-mm 2 cable can also be...

https://www.ia.omron.com/products/family/564/specification.html

...bers have the suffix B (e.g.,    S3D2-AKB) Differences from NPN Models Input signals ON 8 to 12 V (5 mA min.) OFF 0 to 4 V (2 mA max.) Maximum applied voltage 12 V Note: S3D...

https://www.ia.omron.com/products/family/571/lineup.html

... and case. Insulation provided between inputs, outputs, and power supply. Noise immunity ±1,500 V on power supply terminals in normal or common mode. ±1 μs, or 100 ns for square-wave noise wi...

https://www.ia.omron.com/products/family/588/specification.html

... and case. Insulation provided between inputs, outputs, and power supply. Noise immunity ±1,500 V on power supply terminals in normal or common mode. ±1 μs, or 100 ns for square-wave noise wi...

https://www.ia.omron.com/products/family/590/specification.html

...Fixture Brass/nickel plating or SUS316L — Brass/ nickel plating — Contact block PBT resin (UL94 V-0) O-ring Rubber Cover Soft PBT resin *2 — TPEE — *1. Except 5 poles *2. Except XS3R-M426-405...

https://www.ia.omron.com/products/family/781/specification.html

...oltage is 120% of the rated value.            4. Special models enabling a rated voltage of 220 V are available. The setting range for these models is 80% to                 110%. Characteris...

https://www.ia.omron.com/products/family/848/specification.html

...Internal I/O common Rated voltage Model Relay outputs 16 points (SPST-NO × 16) NPN (+common) 24 V DC G70D-VSOC16 Power MOSFET relay outputs G70D-VFOM16 Note: These are all non-standard model ...

https://www.ia.omron.com/products/family/857/lineup.html

...e Suppressing Function) Model Applicable relay coil voltage Remarks For AC relay P70A 100 (110) V AC Varistor surge suppression 200 (220) V AC For DC relay P70D 12/24 V DC D...

https://www.ia.omron.com/products/family/859/lineup.html

...s Internal I/O common Rated voltage Model Relay outputs 8 points (SPST-NO × 8) NPN (+common) 24 V DC G70D-SOC08 Note: This is all non-standard model and require a special order. Contact your ...

https://www.ia.omron.com/products/family/863/lineup.html

...G70D Relay Terminal and not the G6D Relay itself. Coil Ratings (per G6D Relay) Rated voltage 24 V DC Rated current 10.5 mA Coil resistance 2,880 Ω Must-operate voltage 70% max. of rated volta...

https://www.ia.omron.com/products/family/863/specification.html

...       4. Diodes to absorb coil surge are equivalent to S5688J (reverse voltage resistance: 600 V; forward current: 1 A).          5. The values in parentheses are for the G6B-4FB1ND and G6B-...

https://www.ia.omron.com/products/family/901/specification.html

...ut impedance Rated current G3S4-A, G3S4-A1 G3S4-D, G3S4-D1 G3S4-A, G3S4-A1 G3S4-D, G3S4-D1 DC 5 V 4 to 6 VDC 4 VDC max. 1 VDC min. 440 Ω ±20% 550 Ω ±20% 19.2 mA±20% 15.8 mA±20% 12 V ...

https://www.ia.omron.com/products/family/902/specification.html

...ent (mA) Resistance (Ω) Must operate Must release Max. voltage Power consumption Rated voltage (V) 50 Hz 60 Hz % of rated voltage Initial Rated AC 12 614 531 2.24 80 % max. 10 % min. 110 % ma...

https://www.ia.omron.com/products/family/965/specification.html

...rminals, except the alarm output terminals and power output terminals Dielectric strength 1,500 V, 50/60 Hz for 1 min between the power supply, control, output, and R and other terminals 1,50...

https://www.ia.omron.com/products/family/967/specification.html

... max. (when 24 VDC applied) Two G3PAs 14 mA max. (when 24 VDC applied) Must operate voltage 9.6 V ±10% Must release voltage 5 V min. Output voltage 12 VDC ±15% Characteristics Item S...

https://www.ia.omron.com/products/family/989/specification.html

...x. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.6 V (RMS) max. Leakage current 2 mA max. (at 100 VAC) 5 mA max. (at 200 VAC) Insulation resistanc...

https://www.ia.omron.com/products/family/994/specification.html

...rating voltage Coil resistance Must operate voltage Must release voltage Power consumption DC 5 V 4 to 6 VDC 104 Ω 4 VDC max. 0.5 VDC min. Approx. 240 mW 12 V 9.6 to 14.4 VDC 600 Ω 9...

https://www.ia.omron.com/products/family/998/specification.html

... from the initials of the format name. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 Those with the initials E for Control Components is a product of less than 34. E...

https://www.ia.omron.com/products/index/control-components/E.html

... from the initials of the format name. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 Those with the initials H for Control Components is a product of less than 31. H...

https://www.ia.omron.com/products/index/control-components/H.html