...             SHS: Super-high-speed mode (30 μs) *2. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. *3. The values for the minimum sensing object are referenc...

https://www.omron-ap.com/products/family/3275/lineup.html

...oller. If you reverse this order, this product will       not recognize the 24V external input, so lighting greater than 7.5W will not be possible. *4. Electromagnetic environment: Industrial...

https://www.omron-ap.com/products/family/3279/specification.html

...92F-45 Adapter. To use the USB-                Serial Conversion Cable to make the settings, do so before you mount the Temperature Controller in the panel.           4. You cannot use this A...

https://www.omron-ap.com/products/family/3288/dimension.html

...ng. If the input is 　　connected to a UPS, do not connect a UPS with a square-wave output. Doing so will cause the internal temperature 　　of the product to increase, possibly causing smoki...

https://www.omron-ap.com/products/family/3369/specification.html

...c brake is enabled. • The dynamic brake is designed only for emergency stops. Design the system so that the Servomotor remains stopped for at least 3 minutes after applying the dynamic brake....

https://www.omron-ap.com/products/family/3386/specification.html

...lue is calculated from the difference between the heights of the surface and rear      surface, so there is no effect on the temperature change. ZW-S7010/S7020/S7030/S7040/SP7007/SP7010/SPR70...

https://www.omron-ap.com/products/family/3500/specification.html

...32, 64 or 96 GB 8, 16, 32, 64 GB Memory type DDR4 (ECC is available) DDR4 Package Memory Format SO-DIMM Serial Presence Detect (SPD) Speed grade 3200 MT/s CAS latency CL17 Trusted platform mo...

https://www.omron-ap.com/products/family/3631/specification.html

...ion minimal 10yr) Memory Memory size *1 8, 16, 32, 64 GB Memory type DDR4 Package Memory Format SO-DIMM Serial Presence Detect (SPD) Speed grade 3200 MT/s CAS latency CL17 Trusted platform mo...

https://www.omron-ap.com/products/family/3633/specification.html

...cteristics of fuses and the operating characteristics of breakers and select fuses and breakers so that external fuses will not burn out or breakers will not operate due to inrush current. Ri...

https://www.omron-ap.com/products/family/3656/specification.html

...A switched and 10 A safe switched are from the same source and pass through the same 10 A fuse, so the sum of their current must be less than 10 A. Standard AMR EN IS0 12100, EN ISO 13849-1, ...

https://www.omron-ap.com/products/family/3664/specification.html

...ection. (Main-tain the specified mounting space between Controllers.) • To mount the Controller so that it is waterproof, insert the waterproof packing onto the Controller. • When two or more...

https://www.omron-ap.com/products/family/3671/dimension.html

...rection. (Maintain the specified mounting space between Controllers.) • To mount the Controller so that it is waterproof, insert the waterproof packing onto the Controller. • When two or more...

https://www.omron-ap.com/products/family/3672/dimension.html

...chment is used. *6. Even if the motor is not moving, the value of velocity may appear slightly, so that the measurement value is fixed      at 0.00 mm/s until the value reaches 0.90 mm/s or h...

https://www.omron-ap.com/products/family/3686/specification.html

...ning. If the input is connected to a UPS, do not connect a UPS with a square-wave output. Doing so will cause the internal temperature of the product to increase, possibly causing smoking or ...

https://www.omron-ap.com/products/family/3687/specification.html

...2 *1. If the input is connected to a UPS, do not connect a UPS with a square-wave output. Doing so will cause the internal        temperature of the product to increase, possibly causing smok...

https://www.omron-ap.com/products/family/3688/specification.html

...32-LD11 2M 820 330 250 74 E32-LD11R 2M 790 310 240 71 *1. The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm. Cylindrical Models Sensing method Size Sensing di...

https://www.omron-ap.com/products/family/3694/specification.html

...tal Filter This function sets the time constant applied to the first-order lag operation filter so that the noise components mixed with the measured value are eliminated. All models Measuring...

https://www.omron-ap.com/products/family/3699/specification.html

...e theme on both the piping side and the sensor mounting side.    Because the sensor is designed so that the measurement area is in the center of the piping, correct measurement    may not be ...

https://www.omron-ap.com/products/family/3720/lineup.html

.... Z405). Note: 2. Do not connect the Conversion Cable for the following purposes. Failure to do so may result in failure.              1. Connecting with the F39-SGIT-IL3, F39-GCNY2, F39-GCNY...

https://www.omron-ap.com/products/family/3736/lineup.html

...If the input is connected to a UPS, do not       connect a UPS with a square-wave output. Doing so will cause the internal temperature of the product to increase,       possibly causing smoki...

https://www.omron-ap.com/products/family/3753/specification.html