Page top

Lead Contents

FAQ00541 of Temperature Controllers FAQ

FAQ No. FAQ00541

Primary Contents


When can the manual reset be used for E5[]N/E5[]K Temperature Controllers?


The manual reset can be used for P or PD control. There is an offset for the set point when using P or PD control because there is no integral control action.
There is no offset if auto-tuning (AT) or self-tuning (ST) is used. The manual reset can be used to set the close to zero.
If the control output is high when the PV equals the SV, lower the control output for the manual reset.

Set the parameter in Level 1 Mode for the E5[]K, and in Adjustment Level for the E5[]N.

Applicable models: E5AK, E5EK, E5CK, E5AN, E5EN, E5CN, and E5GN

Recommended Products


A Process Indicator Ideal for Discriminating and Displaying Measurements for Voltage/Current Signals


A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function.


Easy to Use and Easy to Read.

Other Temperature Controllers FAQ