GlobalSite Search Results
| Site Search | Product Search |
previous
FAQ00388 for Proximity Sensors | OMRON Industrial ...- ...E Series and TL Series, etc.), please consider that DC/AC magnetic field is 200G or less on the sensing surface of sensor when the sensor is installed. If it is 200G or less, it is possible t...
- FAQ00391 for Proximity Sensors | OMRON Industrial ...
- ... Question What is "NO (normal open)"? What is "NC (normal close)"? Answer NO: When there is a sensing object within sensing range, transistor output is ON. NC: When there is not a ...
- FAQ00397 for Proximity Sensors | OMRON Industrial ...
- ...tion depending on the capacitance change of this electrode is composed, and the approach of the sensing object is detected by increase of the oscillation amplitude. When the sensing ...
- FAQ00402 for Proximity Sensors | OMRON Industrial ...
- ...mplifier is changed, the oscillation frequency is changed, and the characteristic change in the sensing distance and the temperature characteristic occurs. Therefore, it is not warrantable th...
- FAQ00411 for Proximity Sensors | OMRON Industrial ...
- ...etic field' is caused in a detector coil 2 by generating the eddy current on the surface of the sensing object when the sensing object approaches. Detector coil 1: Only 'Magnetic fie...
- FAQ00412 for Proximity Sensors | OMRON Industrial ...
- ...0412 Related Contents Primary Contents Question What is "Response frequency"? Answer When the sensing object moves at high speed and it passes continuously, the response of proximity sensor...
- FAQ00416 for Proximity Sensors | OMRON Industrial ...
- ...on occurs in the Proximity Sensor because of the influence of a surrounding metal? Answer The sensing distance is extended, and faulty reset is resulted. Description The sensing di...
- FAQ00417 for Proximity Sensors | OMRON Industrial ...
- ...g (2) It remains the state when the sensor detects the object regardless of the presence of the sensing object. (2) It remains the state when the sensor detects the object regardless of the p...
- FAQ00418 for Proximity Sensors | OMRON Industrial ...
- ...operation The aluminum chips with small density are not detected, and the detection only of the sensing object is enabled by setting the oscillation frequency lower than usually though it is ...
- FAQ00434 for Proximity Sensors | OMRON Industrial ...
- ...he TL Series excluding the TL-L100 Series, etc.) If DC/AC magnetic field is 200G or less on the sensing surface of sensor, it is possible to use it. The proximity sensor cannot oscillate and ...
Top of page
© Copyright OMRON Corporation 2007 -
. All Rights Reserved.
OMRON Corporation