...ications Dimensions Catalog last update: April 19, 2017 • Easy operation monitoring with bright light indicator. • Wide operating voltage range: 5 to 24 VDC • Light modulation effect...

https://www.ia.omron.com/products/family/441/feature.html

...y adjustment with a built-in sensitivity adjuster. • Easy optical axis monitoring with a bright light indicator. • Compact design incorporating a built-in amplifier and special IC enables dir...

https://www.ia.omron.com/products/family/444/feature.html

...screw terminal sockets by combining with push-in plus terminal sockets (PYF-[]-PU) that feature light insertion force and strong pull-out strength to achieve less wiring work. • In addition t...

https://www.ia.omron.com/products/family/948/feature.html

...screw terminal sockets by combining with push-in plus terminal sockets (PTF-[]-PU) that feature light insertion force and strong pull-out strength to achieve less wiring work. • The standard ...

https://www.ia.omron.com/products/family/949/feature.html

...afety Sensor enters the interlock state, it keeps the control outputs in the OFF state. Even if light becomes incident for all the beams, the control outputs will not go to the ON state. If n...

https://www.ia.omron.com/support/glossary/meaning/3071.html

...afety Sensor enters the interlock state, it keeps the control outputs in the OFF state. Even if light becomes incident for all the beams, the control outputs will not go to the ON state. If n...

https://www.ia.omron.com/support/glossary/meaning/3424.html

...afety Sensor enters the interlock state, it keeps the control outputs in the OFF state. Even if light becomes incident for all the beams, the control outputs will not go to the ON state. If n...

https://www.ia.omron.com/support/glossary/meaning/4349.html

... Input A Photoelectric Sensor is an input device that detects an object when that object blocks light. Each time the light is blocked, the Photoelectric Sensor sends a signal to the ...

https://www.ia.omron.com/support/guide/11/overview.html

... FETs in output elements. In order to operate the power MOS FETs, photodiode arrays are used as light-receiving elements. When current flows into the input terminal, the LED lights. This...

https://www.ia.omron.com/support/guide/18/overview.html

...ty is not visible, but it is a familiar, convenient form of energy that is converted into heat, light, sound, power, or other forms and can be used. It is indispensable for our daily lives. T...

https://www.ia.omron.com/support/guide/501/introduction.html

...f operators near hazardous machines of facilitates. The lineup includes Scanners that use laser light for detection. There are 3 products of Presence Detection Sensors. Safety Laser Scanner O...

https://www.ia.omron.com/product/187.html

... current Less than 10 mA) Residual voltage: 2 V max. (Load current 10 to 100 mA) Operation mode Light-ON/Dark-ON selectable Protective circuit Output short-circuit protection, Output reverse ...

https://www.ia.omron.com/product/item/100/

...int Page Image Sensing method Limited Reflective Sensing distance 55 to 85 mm Note: White paper Light source Red semiconductor laser diode (660 nm) Connection method Pre-wired connector model...

https://www.ia.omron.com/product/item/101/

...int Page Image Sensing method Limited Reflective Sensing distance 55 to 85 mm Note: White paper Light source Red semiconductor laser diode (660 nm) Connection method Pre-wired connector model...

https://www.ia.omron.com/product/item/102/

...m Standard mode: 750 mm High-speed mode: 250 mm Super-high-speed mode: 200 mm Note: White paper Light source Red semiconductor laser diode (660 nm) Connection method Pre-wired connector model...

https://www.ia.omron.com/product/item/103/

...m Standard mode: 750 mm High-speed mode: 250 mm Super-high-speed mode: 200 mm Note: White paper Light source Red semiconductor laser diode (660 nm) Connection method Pre-wired connector model...

https://www.ia.omron.com/product/item/104/

...d mode: 2 m Note: When one of reflection board E39-R21, E39-R22, E39-RS10 and E39-RS11 are used Light source Red semiconductor laser diode (660 nm) Connection method Pre-wired connector model...

https://www.ia.omron.com/product/item/105/

...d mode: 2 m Note: When one of reflection board E39-R21, E39-R22, E39-RS10 and E39-RS11 are used Light source Red semiconductor laser diode (660 nm) Connection method Pre-wired connector model...

https://www.ia.omron.com/product/item/106/

... current Less than 10 mA) Residual voltage: 2 V max. (Load current 10 to 100 mA) Operation mode Light-ON/Dark-ON selectable Protective circuit Output short-circuit protection, Output reverse ...

https://www.ia.omron.com/product/item/108/

... current Less than 10 mA) Residual voltage: 2 V max. (Load current 10 to 100 mA) Operation mode Light-ON/Dark-ON selectable Protective circuit Output short-circuit protection, Output reverse ...

https://www.ia.omron.com/product/item/109/