... allow you to group and nest the names of functions, function block definitions, and data types so that you can manage them. This reduces the chance of duplicated names and makes the entities...

https://www.ia.omron.com/products/family/3077/specification.html

...32-LD11 2M 860 360 250 110 E32-LD11R 2M 840 350 240 100 * The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm. Cylindrical Models Sensing method Size Sensing di...

https://www.ia.omron.com/products/family/3103/specification.html

...D16 2M 40 to 4,200 40 to 2,100 40 to 1,350 40 to 720 *1. The fiber length is 10 m on each side, so the sensing distance is given as 20,000 mm. *2. The fiber length is 2 m on each side, ...

https://www.ia.omron.com/products/family/3161/specification.html

...6 orientations. Restrictions: No restrictions Terminal connection diagram • 0V has 2 terminals, so be sure to wire both terminals. • COM (+V) has 2 terminals, so be sure to wire both...

https://www.ia.omron.com/products/family/3185/specification.html

... characteristics Note: With WLCAL4-N, WLCAL4-LD-N and WLCAL4-LE-N the actuator's tare is large, so depending on the installation          direction, they may not be properly reset. Always ins...

https://www.ia.omron.com/products/family/3263/dimension.html

...output frequency, do not use an inverter output as the power source for the Power Supply. Doing so may result in smoking or burning due to internal temperature increases in the Power Supply. ...

https://www.ia.omron.com/products/family/3460/specification.html

...lue is calculated from the difference between the heights of the surface and rear      surface, so there is no effect on the temperature change. ZW-S7010/S7020/S7030/S7040/SP7007/SP7010/SPR70...

https://www.ia.omron.com/products/family/3500/specification.html

...before attempting a megger test (insulation resistance measurement) on a Servo Drive. Not doing so may result in the Servo Drive failure. Do not perform a dielectric strength test on the Serv...

https://www.ia.omron.com/products/family/3549/specification.html

...32, 64 or 96 GB 8, 16, 32, 64 GB Memory type DDR4 (ECC is available) DDR4 Package Memory Format SO-DIMM Serial Presence Detect (SPD) Speed grade 3200 MT/s CAS latency CL17 Trusted platform mo...

https://www.ia.omron.com/products/family/3631/specification.html

...ion minimal 10yr) Memory Memory size *1 8, 16, 32, 64 GB Memory type DDR4 Package Memory Format SO-DIMM Serial Presence Detect (SPD) Speed grade 3200 MT/s CAS latency CL17 Trusted platform mo...

https://www.ia.omron.com/products/family/3633/specification.html

...ally, turn OFF all of the pins. C SD Memory Card power supply switch Turns OFF the power supply so that you can remove the SD Memory Card. D DIN Track mounting hook These hooks are used to mo...

https://www.ia.omron.com/products/family/3650/specification.html

...cteristics of fuses and the operating characteristics of breakers and select fuses and breakers so that external fuses will not burn out or breakers will not operate due to inrush current. Ri...

https://www.ia.omron.com/products/family/3656/specification.html

...chment is used. *6. Even if the motor is not moving, the value of velocity may appear slightly, so that the measurement value is fixed      at 0.00 mm/s until the value reaches 0.90 mm/s or h...

https://www.ia.omron.com/products/family/3686/specification.html

...ning. If the input is connected to a UPS, do not connect a UPS with a square-wave output. Doing so will cause the internal temperature of the product to increase, possibly causing smoking or ...

https://www.ia.omron.com/products/family/3687/specification.html

...32-LD11 2M 820 330 250 74 E32-LD11R 2M 790 310 240 71 *1. The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm. Cylindrical Models Sensing method Size Sensing di...

https://www.ia.omron.com/products/family/3694/specification.html

...tal Filter This function sets the time constant applied to the first-order lag operation filter so that the noise components mixed with the measured value are eliminated. All models Measuring...

https://www.ia.omron.com/products/family/3699/specification.html

.... Z405). Note: 2. Do not connect the Conversion Cable for the following purposes. Failure to do so may result in failure.              1. Connecting with the F39-SGIT-IL3, F39-GCNY2, F39-GCNY...

https://www.ia.omron.com/products/family/3736/lineup.html

... test (insulation resistance measurement)              on a Servo Drive.              Not doing so may result in the Servo Drive failure.              Do not perform a dielectric strength tes...

https://www.ia.omron.com/products/family/3776/specification.html

...32-LD11 2M 860 360 250 110 E32-LD11R 2M 840 350 240 100 * The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm. Cylindrical Models Sensing method Size Sensing di...

https://www.ia.omron.com/products/family/3831/specification.html

...tal Filter This function sets the time constant applied to the first-order lag operation filter so that the noise components mixed with the measured value are eliminated. All models Measuring...

https://www.ia.omron.com/products/family/3902/specification.html