... the receiver to recognize the position of an object. The CCD method uses digital process- ing, so it enables the sensor to perform more accurate measurements compared with the light intensit...

https://www.ia.omron.com/data_pdf/guide/56/displacement_measurement_tg(overview).pdf

...hen switching a load. When mounting to DIN Track, separate magnetic contactors from the Counter so that the Counter is not subjected to vibration and shock. Use anti-vibration rubber. Do not ...

https://www.ia.omron.com/product/cautions/11/safety_precautions.html

...parts may result in shock. Always turn OFF the power supply before performing wiring. Not doing so may result in shock. Do not allow short-circuit current to flow to the load side of the SSR....

https://www.ia.omron.com/product/cautions/18/safety_precautions.html

... when switching a load. When mounting to DIN Track, separate magnetic contactors from the Timer so that the Timer is not subjected to vibration and shock. Use anti-vibration rubber. Do not us...

https://www.ia.omron.com/product/cautions/19/safety_precautions.html

...wer Supply. Be sure to remove the sheet covering the Power Supply for machining before power-ON so that it does not interfere with heat dissipation. Load Internal parts may possibly deteriora...

https://www.ia.omron.com/product/cautions/22/safety_precautions.html

...or burn. ・ DC 3-Wire NPN Output Sensors Load Short-circuit Do not short-circuit the load. Doing so may cause the Sensor to explode or burn. ・ DC 3-Wire NPN Output Sensors Wiring Be sure to ...

https://www.ia.omron.com/product/cautions/24/safety_precautions.html

...t. (b) Suppress the generation of pulse from the contact bouncing or chattering of the contacts so that it is less than the noise margin of the load. Use microload switches that use gold cont...

https://www.ia.omron.com/product/cautions/29/safety_precautions.html

...rect opening mechanism, use the NC contacts with a forced release mechanism, and set the Switch so that it will operate in direct opening mode. For safety, install the Switch using one-way ro...

https://www.ia.omron.com/product/cautions/30/safety_precautions.html

...ing is correct. Incorrect wiring may explosion or burning. Do not short-circuit the load. Doing so may cause explosion or burning. Make sure the power is OFF before performing wiring work. If...

https://www.ia.omron.com/product/cautions/34/safety_precautions.html

...t touch the terminals or other charged parts of the Switch while power is being supplied. Doing so may result in electric shock. Do not apply a voltage between the incandescent lamp and the t...

https://www.ia.omron.com/product/cautions/38/safety_precautions.html

...N the power. If the load and Sensor are connected to separate power supplies, design the system so that the Sensor power turns ON first. Turning OFF the Power An output pulse may be generated...

https://www.ia.omron.com/product/cautions/41/safety_precautions.html

... may cause explosion or burning. --- Load Short-circuiting Do not short-circuit the load. Doing so may cause explosion or burning. Incorrect Wiring Do not reverse the power supply polarity or...

https://www.ia.omron.com/product/cautions/43/safety_precautions.html

...atory action precautions for which there is no specified symbol. Do not touch the blades. Doing so may result in injury. Always mount the optional Finger Guard when there is any possibility t...

https://www.ia.omron.com/product/cautions/45/safety_precautions.html

...icable models: E5LC. Do not touch any of the terminals while the power is being supplied. Doing so may result in electric shock. Do not allow pieces of metal or wire cuttings to get inside th...

https://www.ia.omron.com/product/cautions/53/safety_precautions.html

...xcessive force. 21.Do not attach or remove connectors with the DeviceNet power turned ON. Doing so may cause product failure or malfunction. 22.Use wire that is capable of withstanding heat o...

https://www.ia.omron.com/product/cautions/62/safety_precautions.html

...xcessive force. 20.Do not attach or remove connectors with the DeviceNet power turned ON. Doing so may cause product failure or malfunction. Precautions for Correct Use Countermeasures Agains...

https://www.ia.omron.com/product/cautions/63/safety_precautions.html

...nits by making a hole in the bracket and tightening just one nut. • The cable follows the wall, so extra space is not required, and the cable will not get caught on other objects. A Fiber Uni...

https://www.ia.omron.com/products/family/1532/application.html

...s with very few failures. Massive System Variation We provide a wide variety of RFID components so that users can customize configurations for any installation space or objective, from replac...

https://www.ia.omron.com/products/family/1863/application.html

...fe display function The end of the laser diode lifespan is automatically detected and displayed so maintenance can be performed systematically. On the main digital display of the amplifier, t...

https://www.ia.omron.com/products/family/2979/application.html

...eduction in the need for debugging. Partial adjustments to individual modules is also possible, so assembly and adjustment can be carried out together, which leads to more efficient on-site w...

https://www.ia.omron.com/support/guide/10/further_information.html