...system, with its highly stable light source, can be turned off when illumination is not needed. So, electricity costs can be reduced. (For a lamp system whose light source is unstable, you ha...

https://www.omron-ap.co.th/products/family/1876/feature.html

...ecipe methodology. Strong support tool The measurement data is gathered in the PCs in real time so it is easy to ascertain and analyse the current conditions at any time. 3-way optical axis a...

https://www.omron-ap.co.th/products/family/1918/feature.html

...unications baud rate is set without using switches and addresses are set using rotary switches, so setting errors are reduced. • Communications connector and removable I/O terminal block enab...

https://www.omron-ap.co.th/products/family/1919/feature.html

...DC and Low Voltage 24 to 48 VAC/12 to 48 VDC.  • ON- and OFF-times can be set independently and so combinations of long ON- or OFF-time and short OFF- or ONtime settings are possible.  • Twen...

https://www.omron-ap.co.th/products/family/194/feature.html

...et value is shown on the right side of the display. The set value can be numerically confirmed, so the setting can be quantified. This allows identical settings to be made reliably and in a s...

https://www.omron-ap.co.th/products/family/1959/feature.html

... design. It offers greater performance and faster I/O response as well as extreme scalability - so you will only need one family. In addition, programming, debugging and networking are faster...

https://www.omron-ap.co.th/products/family/1992/feature.html

... to maintain a stable measurement. They are also susceptible to the influences of ambient light so are difficult to measure using conventional laser measurement sensors. The ZG2 solves these ...

https://www.omron-ap.co.th/products/family/2041/feature.html

...ed for a variety of purposes including dust level setting, alarm output, timed measurement, and so forth. Triggers can be input to initiate monitoring when necessary and alarms can be output ...

https://www.omron-ap.co.th/products/family/2067/feature.html

...sier to understand, and the present value display can be switched between red, green and orange so that output status can be seen from a distance. Note: The H5CX-A11 and H5CX-L8 Timers have o...

https://www.omron-ap.co.th/products/family/207/feature.html

...nd power factors to appropriate levels. Fixed values are used for the voltage and power factor, so the accuracy specifications do not apply. * Set the voltage to 100 V when performing simple ...

https://www.omron-ap.co.th/products/family/2646/feature.html

... stopped power, standby power, and      operating power depending on the power usage conditions so that you can see where energy can be saved. 2) Three-state Energy Classification can be link...

https://www.omron-ap.co.th/products/family/2714/feature.html

...ircuit. Two Outputs: Light-ON and Dark-ON All models provide both a light-ON and dark-ON output so that the output can be switched according to the application simply by changing the wiring. ...

https://www.omron-ap.co.th/products/family/2716/feature.html

... socket.              When using the short bars on the upper section of the socket, insert them so that their heads are pointed upwards              (see the figure below).              Other...

https://www.omron-ap.co.th/products/family/2808/lineup.html

.... On the model Z-15GQ8-B, the M3 hole with a depth of 10 mm is a through hole. Take precautions so that no                 water or screw lock agent penetrates into the hole. Panel Mount Roll...

https://www.omron-ap.co.th/products/family/289/dimension.html

...d I/O signals (12/8 and 0/32). Function blocks up to 128pcs complete this fully flexible range, so you can always be sure of a needs-match solution. Simple Above all, the Omron G9SP range is ...

https://www.omron-ap.co.th/products/family/2937/feature.html

...fe display function The end of the laser diode lifespan is automatically detected and displayed so maintenance can be performed systematically. On the main digital display of the amplifier, t...

https://www.omron-ap.co.th/products/family/2979/feature.html

...even when the door closes slowly. No adhesion of iron particles Permanent magnets are not used, so iron is not attracted, making maintenance easier. Visible safety Checking at the production ...

https://www.omron-ap.co.th/products/family/2989/feature.html

...ed in JIS K 2241:2000; Temperature: 35 °C max.) *2. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. Note: 1. The following mode names and response times apply...

https://www.omron-ap.co.th/products/family/3057/lineup.html

... easily. It allow you to edit the program on the controller and the compiling is not necessary. So you can develop and adjust the system quickly. ･Microsoft® Visual Studio® and Windows are ei...

https://www.omron-ap.co.th/products/family/3069/feature.html

...ions with Host Devices Ethernet Connection The compact body also provides an Ethernet connector so that you can transfer read data and images via Ethernet. Smoothly transfer data to PLCs, com...

https://www.omron-ap.co.th/products/family/3070/feature.html