GlobalQuestion
Can a 61F-GPN-V50 Water Leak Detector and Electrode be used as a set?
Answer
Yes, they can.
1. Pump Control
Use the same connections as the 61F-GP-N, shown in the following diagram.
2. Liquid Level Control Only
Liquid level detection can be performed by leaving the E2 electrode unused and making no connections to terminals 6 and 7.
Recommended Products
Other Level Switches FAQ
-
Why do the specifications for the High-sensitivity 61F Floatless Level Controller say, "possible to use with 15 kOHM or less, however, this may cause reset failure"?
-
Can two 61F Floatless Level Controllers and two Electrode Holders be used in the same tank?
-
When voltage is applied to 61F Floatless Level Controller, it operates regardless of the actual liquid level. What is the cause of the problem and how can it be corrected?
FAQ
Top of page
© Copyright OMRON Corporation 2007 - 2024. All Rights Reserved.
