Page top

XW2Z (Standard-type)

Connecting Cables for Connector-Terminal Block Conversion Units (Shielded)

XW2Z (Standard-type)

Connect Connector-Terminal Block Conversion Units (XW2[]) to I/O Units for Programmable Controllers with one touch.

FCN 24-pin - MIL 20-pin, Straight Wiring

XW2Z-[][][]A

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_1_1 0.5 XW2Z-050A 7.8 dia./R63
1.0 XW2Z-100A
1.5 XW2Z-150A
2.0 XW2Z-200A
3.0 XW2Z-300A
5.0 XW2Z-500A
10.0 XW2Z-010A
15.0 XW2Z-15MA
20.0 XW2Z-20MA

* Cable length L (m)

XW2Z (Standard-type) Lineup 3

FCN 40-pin - MIL 40-pin, Straight Wiring

XW2Z-[][][]B

Appearance Type Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_2_2 Straight wiring 0.5 XW2Z-050B 10.4 dia./R84
1.0 XW2Z-100B
1.5 XW2Z-150B
2.0 XW2Z-200B
3.0 XW2Z-300B
5.0 XW2Z-500B
10.0 XW2Z-010B
15.0 XW2Z-15MB
20.0 XW2Z-20MB
Reverse wiring 0.5 XW2Z-050B-R1
1.0 XW2Z-100B-R1
1.5 XW2Z-150B-R1
2.0 XW2Z-200B-R1
3.0 XW2Z-300B-R1
5.0 XW2Z-500B-R1

* Cable length L (m)

XW2Z (Standard-type) Lineup 6

XW2Z-[][][]B-A

Appearance Type Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_3_1 Straight wiring 1.0 XW2Z-100B-A 10.4 dia./R84
1.5 XW2Z-150B-A
2.0 XW2Z-200B-A
3.0 XW2Z-300B-A
5.0 XW2Z-500B-A

FCN 40-pin - MIL 20-pin, MIL 20-pin

XW2Z-[][][]D

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
(A) (B)
871_lu_4_1 1.0 0.75 XW2Z-100D 10.4 dia./R84
1.5 1.25 XW2Z-150D
2.0 1.75 XW2Z-200D
3.0 2.75 XW2Z-300D
5.0 4.75 XW2Z-500D
10.0 9.75 XW2Z-010D
15.0 14.75 XW2Z-15MD
20.0 19.75 XW2Z-20MD

* Cable length L (m)

XW2Z (Standard-type) Lineup 10

MIL 34-pin - MIL 34-pin, Straight Wiring

XW2Z-[][][]EE

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_13_1 0.5 XW2Z-050EE 9.8 dia./R79
1 XW2Z-100EE
1.5 XW2Z-150EE
2 XW2Z-200EE
3 XW2Z-300EE
5 XW2Z-500EE

*Cable length L (m)

XW2Z (Standard-type) Lineup 13

MIL 20-pin - Discrete-wire Press-fit Terminals

XW2Z-[][][]F

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_5_1 1.0 XW2Z-100F 7.8 dia./R63
1.5 XW2Z-150F
2.0 XW2Z-200F
3.0 XW2Z-300F
5.0 XW2Z-500F
10.0 XW2Z-010F
15.0 XW2Z-15MF
20.0 XW2Z-20MF

* Cable length L (m)

XW2Z (Standard-type) Lineup 16

FCN 56-pin - MIL 60-pin

XW2Z-[][][]H-1 (For CS1-series I/O Unit Connection)

Appearance Special Connecting Cables * Sheath outer diameter (mm)/
Minimum bending radius (mm)
Cable length L (m) Model
871_lu_7_1 0.5 XW2Z-050H-1 12.1 dia./R99
1.0 XW2Z-100H-1
1.5 XW2Z-150H-1
2.0 XW2Z-200H-1
3.0 XW2Z-300H-1
5.0 XW2Z-500H-1
7.0 XW2Z-700H-1
10.0 XW2Z-010H-1
1.0 XW2Z-100H-1G
1.5 XW2Z-150H-1G
2.0 XW2Z-200H-1G
3.0 XW2Z-300H-1G
5.0 XW2Z-500H-1G

* Up to two cables required for each Programmable Controller I/O Unit.
Note: CS1 signal names connected to the XW2D are different for the XW2Z-[][][]H-[] and the XW2Z-[][][]H-[]G.
          Refer to the I/O Signal Tables on Data Sheet.

* Cable length L (m)

XW2Z (Standard-type) Lineup 20

FCN 56-pin - MIL 20-pin, MIL 40-pin

XW2Z-[][][]H-2 (For CS1-series I/O Unit Connection)

Appearance Special Connecting Cables * Sheath outer diameter (mm)/
Minimum bending radius (mm)
Cable length L (m) Model
(A) (B)
871_lu_8_1 1.0 0.75 XW2Z-100H-2 12.1 dia./R99
1.5 1.25 XW2Z-150H-2
2.0 1.75 XW2Z-200H-2
3.0 2.75 XW2Z-300H-2
5.0 4.75 XW2Z-500H-2
10.0 9.75 XW2Z-010H-2
1.0 0.75 XW2Z-100H-2G
1.5 1.25 XW2Z-150H-2G
2.0 1.75 XW2Z-200H-2G
3.0 2.75 XW2Z-300H-2G
5.0 4.75 XW2Z-500H-2G

* Up to two cables required for each Programmable Controller I/O Unit.
Note: CS1 signal names connected to the XW2D are different for the XW2Z-[][][]H-[] and the XW2Z-[][][]H-[]G.
          Refer to the I/O Signal Tables on Data Sheet.

* Cable length L (m)

XW2Z (Standard-type) Lineup 24

FCN 56-pin - MIL 20-pin, MIL 20-pin, MIL 20-pin

XW2Z-[][][]H-3 (For CS1-series I/O Unit Connection)

Appearance Special Connecting Cables * Sheath outer diameter (mm)/
Minimum bending radius (mm)
Cable length L (m) Model
(A) (B) (C)
871_lu_9_1 1.0 0.75 1.0 XW2Z-100H-3 12.1 dia./R99
1.5 1.25 1.5 XW2Z-150H-3
2.0 1.75 2.0 XW2Z-200H-3
3.0 2.75 3.0 XW2Z-300H-3
5.0 4.75 5.0 XW2Z-500H-3
10.0 9.75 10.0 XW2Z-010H-3

* Up to two cables required for each Programmable Controller I/O Unit.

* Cable length L (m)

XW2Z (Standard-type) Lineup 28

FCN 40-pin - MIL 40-pin, Straight Wiring

XW2Z-[][][]K

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_10_1 0.25 XW2Z-C25K 10.4 dia./R84
0.5 XW2Z-C50K
1.0 XW2Z-100K
1.5 XW2Z-150K
2.0 XW2Z-200K
3.0 XW2Z-300K
5.0 XW2Z-500K

* Cable length L (m)

XW2Z (Standard-type) Lineup 31

FCN 40-pin - MIL 20-pin, MIL 20-pin

XW2Z-[][][]L

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
(A) (B)
871_lu_6_1 1.0 0.75 XW2Z-100L 10.4 dia./R84
1.5 1.25 XW2Z-150L
2.0 1.75 XW2Z-200L
3.0 2.75 XW2Z-300L
5.0 4.75 XW2Z-500L
10.0 9.75 XW2Z-010L
15.0 14.75 XW2Z-15ML
20.0 19.75 XW2Z-20ML

* Cable length L (m)

XW2Z (Standard-type) Lineup 34

MIL 40-pin - MIL 20-pin, MIL 20-pin

XW2Z-[][][]N

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
(A) (B)
871_lu_11_1 1.0 0.75 XW2Z-100N 10.4 dia./R84
1.5 1.25 XW2Z-150N
2.0 1.75 XW2Z-200N
3.0 2.75 XW2Z-300N
5.0 4.75 XW2Z-500N
10.0 9.75 XW2Z-010N
15.0 14.75 XW2Z-15MN
20.0 19.75 XW2Z-20MN

* Cable length L (m)

XW2Z (Standard-type) Lineup 37

MIL 20-pin - MIL 20-pin, Straight Wiring

XW2Z-[][][]X

Appearance Cable length L (m) * Model Sheath outer diameter (mm)/
Minimum bending radius (mm)
871_lu_12_4 0.5 XW2Z-C50X 7.8 dia./R63
1.0 XW2Z-100X
2.0 XW2Z-200X
3.0 XW2Z-300X
5.0 XW2Z-500X
10.0 XW2Z-010X

* Cable length L (m)

XW2Z (Standard-type) Lineup 40