...on’s proprietory Smart Power Control combines APC and DPC to automatically compensate the power so that high-precision detection with no maintenance is performed. And if compensation is not p...

https://www.fa.omron.co.jp/data_pdf/cat/e3x-hd_e417-e1_5_2_csm1001626.pdf

...16 Reflective Top-view 4° E32-D16 2M Integrated lens *1. The fiber length is 10 m on each side, so the sensing distance is given as 20,000 mm. *2. The fiber length is 2 m on each side, ...

https://www.fa.omron.co.jp/data_pdf/cat/e3x-sd_na_e401-e1_6_4_csm2185.pdf

...arts feeders, roll presses for secondary batteries, assembly machines for digital products, and so on to detect the presence or absence of workpieces. However, many customers are using fiber ...

https://www.fa.omron.co.jp/data_pdf/cat/e3x-zv_mzv_e600-e1_3_4_csm1109326.pdf

...to each other. Otherwise, mutual interference may result. • Always install the Sensor carefully so that the aperture angle range of the Sensor will not cause it to be directly exposed to inte...

https://www.fa.omron.co.jp/data_pdf/cat/e3z-ls_ds_e_9_5_csm436.pdf

..., or outdoors. Ambient Environment Do not install the product in the following locations. Doing so may result in product failure or malfunction. • Locations subject to excess dust and dirt • ...

https://www.fa.omron.co.jp/data_pdf/cat/e3z-lt_lr_ll_ds_e_7_5_csm2158.pdf

....5° max. axis The offset between the optical axis and the mechanical axis is kept within ±2.5°, so the optical axis can be accurately set simply by mounting the Sensor according to the mechan...

https://www.fa.omron.co.jp/data_pdf/cat/e3z_ds_e_18_9_csm438.pdf

...e Slit to the upper indented mounting portion of the Sensor and adjust the position of the Slit so that the Slit will be in parallel to the lens side of the Sensor. 1 2 2. Press the lower pro...

https://www.fa.omron.co.jp/data_pdf/cat/e3z_photoelectric_operation_tg_e_7_3_csm442.pdf

... flow that exceeds the rated current. If a load short circuit occurs, the output will turn OFF, so check the wiring before turning ON the power supply again. The shortcircuit protection circu...

https://www.fa.omron.co.jp/data_pdf/cat/e3zm-b_ds_e_4_9_csm2160.pdf

...ous models from OMRON. The protective structure eliminates the need for screws to hold a cover, so there are no worries about loose screws leading to liquid penetration. The compact, easy-to-...

https://www.fa.omron.co.jp/data_pdf/cat/e3zm-c_ds_e_5_1_csm2161.pdf

... flow that exceeds the rated current. If a load short circuit occurs, the output will turn OFF, so check the wiring before turning ON the power supply again. The shortcircuit protection circu...

https://www.fa.omron.co.jp/data_pdf/cat/e3zm-v_e389-e1_6_3_csm2113.pdf

... flow that exceeds the rated current. If a load short circuit occurs, the output will turn OFF, so check the wiring before turning ON the power supply again. The short-circuit protection circ...

https://www.fa.omron.co.jp/data_pdf/cat/e3zm_ds_e_6_1_csm2159.pdf

...nation with a Safety Controller (G9SP-series/NX-series Safety Control Unit). G9SP E3ZS NX-SL/SI/SO Application Examples For gaps in small-sized equipment Can be used to protect personnel from...

https://www.fa.omron.co.jp/data_pdf/cat/e3zs_ds_e_5_1_csm1061082.pdf

...トロールユニット） と組み合わせて PLc/安全カテゴリ2の安全機能としてご使用いただけます。 G9SP E3ZS NX-SL/SI/SO アプリケーション小型設備のスキマに機械の危険なスキマや半自動機における作業者保護...

https://www.fa.omron.co.jp/data_pdf/cat/e3zs_ds_j_5_1.pdf

...ntly, be sure to turn ON the E4E2 first. • Installation Mounting Mount the Emitter and Receiver so that they face each other in a straight line, and so that they are within the speci...

https://www.fa.omron.co.jp/data_pdf/cat/e4e2_ds_e_2_4_csm1726.pdf

...tures  High-precision detection with a wide range of measurements.  The Sensor is ultrasonic, so it is not affected by the color of objects. Four types of Sensors are available with maximum...

https://www.fa.omron.co.jp/data_pdf/cat/e4pa-n_ds_e_5_4_csm1404.pdf

...wer supply is not large enough. Make sure that the capacity of the power supply is large enough so that the supply voltage range will be always from 90% to 110% of the rated supply voltage. •...

https://www.fa.omron.co.jp/data_pdf/cat/e5c2_ds_e_7_2_csm214.pdf

...s side by side. (Allow mounting clearance between the Controllers.) • To install the Controller so that it is waterproof, insert the Waterproof Packing. • When two or more Controllers are mou...

https://www.fa.omron.co.jp/data_pdf/cat/e5cb_h172-e1_8_6_csm2667.pdf

...inger Safe Terminal Cover is also available. Note: Do not use any other types of Sockets. Doing so will adversely affect the accuracy. Applicable Thermistors Hard Protective Cover Use Element...

https://www.fa.omron.co.jp/data_pdf/cat/e5cs_ds_e_5_3_csm211.pdf

... E5L Safety Precautions CAUTION Do not touch the terminals while power is being supplied. Doing so may occasionally result in minor injury due to electric shock. Do not allow pieces of metal,...

https://www.fa.omron.co.jp/data_pdf/cat/e5l_h162-e1_2_12_csm2072.pdf

...tary Encoder Blue (0 V) Shield Note 1: Used only to reset the counter using phase Z. When doing so, set the phase ZZ switch to Z and use a Rotary Encoder with an Open-collector Output. 2: Whe...

https://www.fa.omron.co.jp/data_pdf/cat/e63-wf_ds_e_4_4_csm489.pdf