GlobalQuestion
Can MY4 AC100/110V General-purpose Relays and MY4 AC110/120V both be used with a 110-VAC coil voltage?
Answer
Yes, they can both be used because 100/110-VAC MY Series have the following four ratings.
100 VAC at 50 Hz
100 VAC at 60 Hz
110 VAC at 50 Hz
110 VAC at 60 Hz
Recommended Products
MY
Best-selling, general-purpose relays that can be selected based on operating environment and application
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page
© Copyright OMRON Corporation 2007 - 2024. All Rights Reserved.
