Page top

Lead Contents

FAQ01565 of Measuring / Motor Protective Relays FAQ

FAQ No. FAQ01565

Primary Contents


Can the Motor Protective Relay "SE" be used in an inverter circuit?


No, it cannot be used.

Motor Protective Relay "SE" is designed in order to protect the motor at sine wave frequency of 50/60Hz.
Therefore, if the SE is used in an inverter circuit, errors may occur with the overload element, and unnecessary operation may be performed with the open-phase or reverse-phase element.
For the above mentioned reason, overload, open-phase, or reverse-phase protection functions cannot be used at all.

For motor protection of the inverter control, use the Motor Protective Relay "K2CM Series" or the Multiple Motor Protective Relay "K2MR Series".

Recommended Products


Multi-Function Indication Monitor for Production Site Visualization * (* Models with indication monitor)


High-speed, High cost performance Ionization


Flexible Selection of Reliability and Ease of Operation with the S8JX. New Models with Harmonic Current Suppression for a Broader Lineup.

Other Measuring / Motor Protective Relays FAQ