GlobalQuestion
Is it possible to connect two CPM1A Programmable Controller Units with a RS-232C cross cable through an adapter, process an input to one CPM1A Unit, and output the result from the other CPM1A Unit?
Answer
Data in the LR Area can be transferred using a CPM1A 1:1 link. Transfer the necessary data to the LR Area to use this function. DM 6650 must be set to use a 1:1 link. In this case, the baud rate will be set to 19,200 bps and cannot be changed.
Recommended Products
Other Programmable Controllers FAQ
-
What products are recommended as substitutes for the C200H-CPU01 Programmable Controller?
-
How can I connect a C200H Programmable Controller's CPU Unit with an IBM PC/AT or compatible computer?
-
Why communication error occurs during CX-Programmer FA Integrated Tool Package get online with Programmable Controller?
FAQ
Top of page
© Copyright OMRON Corporation 2007 - 2024. All Rights Reserved.
