GlobalQuestion
Which Connector-Terminal Block Conversion Units, I/O Relay Terminals, and Connecting Cables can be used with C200H-ID217 DC Input Units?
Answer
The combinations of Connector-Terminal Block Conversion Units, I/O Relay Terminals, and Connecting Cables that can be used with C200H-ID217 are shown in the following table.
The following models can be used with C200H-ID217: XW2D-20G6, XW2B-20G5, XW2B-20G4, XW2D-40C6, XW2D-40G6, XW2D-40G6-RF, XW2B-40G5, XW2B-40G5-T, XW2B-40G4, XW2C-20G6-IO16, XW2C-20G5-IN16, XW2E-20G5-IN16, and G7TC-IA16/ID16.
| Connector-Terminal Block Conversion Units and I/O Relay Terminals | Connecting Cable | ||
| Number of branches | Length (m) | Model | |
| XW2D-40G6 XW2D-40G6-RF XW2B-40G5 XW2B-40G4 | 0 branches | 0.5 | XW2Z-050B |
| 1 | XW2Z-100B | ||
| 1.5 | XW2Z-150B | ||
| 2 | XW2Z-200B | ||
| 3 | XW2Z-300B | ||
| 5 | XW2Z-500B | ||
| XW2D-40C6 | 0 branches | 0.5 | XW2Z-050BU |
| 1 | XW2Z-100BU | ||
| 1.5 | XW2Z-150BU | ||
| 2 | XW2Z-200BU | ||
| 3 | XW2Z-300BU | ||
| 5 | XW2Z-500BU | ||
| XW2D-20G6 (2) XW2B-20G5 (2) XW2B-20G4 (2) XW2B-40G5-T XW2C-20G6-IO16 (2) XW2C-20G5-IN16 (2) XW2E-20G5-IN16 (2) | 2 branches | 1 | XW2Z-100D |
| 1.5 | XW2Z-150D | ||
| 2 | XW2Z-200D | ||
| 3 | XW2Z-300D | ||
| 5 | XW2Z-500D | ||
| G7TC-IA16/ID16 | 2 branches | 1 | G79-I100C-75 |
| 1.5 | G79-I150C-125 | ||
| 2 | G79-I200C-175 | ||
| 3 | G79-I300C-275 | ||
| 5 | G79-I500C-475 | ||
Recommended Products
Other Programmable Controllers FAQ
-
What products are recommended as substitutes for the C200H-CPU01 Programmable Controller?
-
How can I connect a C200H Programmable Controller's CPU Unit with an IBM PC/AT or compatible computer?
-
Why communication error occurs during CX-Programmer FA Integrated Tool Package get online with Programmable Controller?
FAQ
Top of page
© Copyright OMRON Corporation 2007 - 2025. All Rights Reserved.
