GlobalQuestion
What is the minimum load current value that can be set?
Answer
The load current is limited to 1A at 100% output.
TRIAC or Thyristor output elements have a minimum holding current. If the load current is less than 1A, decrease in output signals cannot make output elements keep in the ON state, so that oscillating waveform may occur or they may not be turned ON.
Recommended Products
MY
Best-selling, general-purpose relays that can be selected based on operating environment and application
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other Power Controllers FAQ
-
Which terminals should the G3PX Power Controller inputs be connected to?
-
Can three G3PX Power Controllers for single-phase applications be combined for control of three-phase loads?
-
What are the conditions for detecting disconnection for G3PX-2[][]EHN-CT Power Controllers that detect disconnection for multiple heaters?
FAQ
Top of page
© Copyright OMRON Corporation 2007 - 2025. All Rights Reserved.
