GlobalSite Search Results
| Site Search | Product Search | IA Global Search |
previous
introduction.html- ...on computers. Memory in the CPU Unit is automatically assigned to the variables that you create so that you do not have to remember the physical addresses. A Wealth of Security Features The m...
https://www.ia.omron.com/support/guide/454/introduction.html
- Machinary Safety of Safety Components | OMRON Indu...
- ... be deformed or displaced by a strong force which may be applied on it when a contact is welded so that the positive opening works correctly. Therefore the safety limit switch has a direct op...
- Outline of Major Standards | OMRON Industrial Auto...
- ...ation devices used on ships must conform to classification standards of individual countries if so requested by the owner. Regulation (EC) No. 391/2009 of the European Parliament and of the C...
- CJ1W-CLK CJ-series Controller Link Units/Lineup | ...
- ...s, Ltd. --- * There is a risk of quality problems when using cables assembled by typical users, so we recommend purchasing cables with preattached connectors or having a qualified technici...
- D4N-[]R Pull-reset Safety Limit Switch/Specificati...
- ...tch a standard load, it cannot be used for a load of a smaller capacity. Doing so may result in roughening of the contact surface and contact reliability may be lost. *1. The...
https://www.ia.omron.com/products/family/1498/specification.html
- E3S Photoelectric Sensor with Built-in Amplifier/D...
- ...en the Spacer is not used. * With the E3S-2E4 (41), use the Spacer as shown in the figure above so that the supporter and Mounting Bracket will not be struck when the optical axis is adjus...
https://www.ia.omron.com/products/family/1568/dimension.html
- CJ1W-PA / PD CJ-series Power Supply Unit/Specifica...
- ...termined for the current and power that can be provided to the mounted Units. Design the system so that the total current consumption for all the mounted Units does not exceed the maximum tot...
https://www.ia.omron.com/products/family/1639/specification.html
- CS1W-PPS01 SYSMAC CS-series Process Analog I/O Uni...
- ...M Area.) Note 1. Errors and fluctuations will increase when the input signal pulse rate is low, so specify a longer time unit. Note 2. The instantaneous value is only refreshed at intervals o...
https://www.ia.omron.com/products/family/1671/specification.html
- CS1W-CLK SYSMAC CS-series Controller Link Units/Li...
- ...ies, Ltd. - * There is a risk of quality problems when using cables assembled by typical users, so we recommend purchasing cables with preattached connectors or having a qualified technicia...
- G2R-[]-S (S) General-purpose Relay/Lineup | OMRON ...
- ... socket. When using the short bars on the upper section of the socket, insert them so that their heads are pointed upwards (see the figure below). Other...
Top of page
© Copyright OMRON Corporation 2007 -
. All Rights Reserved.
OMRON Corporation