Primary Contents

• How do I interpret the catalog values for mutual interference with Proximity Sensors?
• Why does the influence with a surrounding metal of the Proximity Sensor occur?
• Why does mutual interference occur with Proximity Sensors?
• What malfunctions occur if there is mutual interference with Proximity Sensors?
• Please teach the principle of operation of Standard cylinder type Proximity Sensor the E2E Series.
• What are notes in the idea of the repeat accuracy of the Proximity Sensor?
• What series and parallel connections are possible with Proximity Sensors?
• What happens if Proximity Sensors are used in high temperatures?
• What malfunction occurs when the Proximity Sensor is wired by mistake?
• What are measures and malfunction mode when the relay of not being possible to connect it with the Proximity Sensor is connected?
• What is the construction and the operating principle of the GLS Proximity Sensors?
• Will there be any problem if GLS Proximity Sensors are installed with the direction of the magnet section changed?
• What kind of consideration points does it have when the relay is connected to Proximity Sensors?
• What precautions are there for using Proximity Sensors at a closer distance than the distance given in the catalog for preventing mutual interference?
• What are kinds of noises that influence the Proximity Sensor?
• What is the difference of NPN transistor output and PNP transistor output of the sensor?
• Are Proximity Sensors that can be used outdoors available?
• The Proximity Sensor remains to turn on while using the Proximity Sensor near the magnetic field source. How to avoid this phenomenon? And why does it occur?
• What is "NO (normal open)"? What is "NC (normal close)"?
• Please teach the principle of operation of capacitive proximity sensor the E2K type.
• Is it possible to extend the cable of the Proximity Sensor?
• What is the principle of operation of Long-distance Proximity Sensor the TL-L Series?
• What is "Response frequency"?
• What Proximity Sensors are available for applications that require heat resistance?
• What malfunction occurs in the Proximity Sensor because of the influence of a surrounding metal?
• Please teach the malfunction of the Proximity Sensor by the noise and the noise measures.
• Please teach the principle of operation of Anti-aluminum cut chips model cylinder type Proximity Sensor the E2EZ Series.
• Is it possible to use the Proximity Sensor near the magnetic field (magnet)?
• What is "Response time"?
• How is the UL standard of the sensor of the DC power system treated?
• Why is there a difference in the effect of surrounding metal between Shielded Proximity Sensors and Unshielded Proximity Sensors?
• Can General-purpose Proximity Sensors be used as the connection switch of F92A Inductive Couplers?
• What is the allowable bending radius of coaxial cables or shielded cables for Photoelectric Sensors and Proximity Sensors?
• Why is it not possible to use Proximity Sensors that are not listed in the catalog as Transmittable Proximity Sensors for F92A Inductive Couplers?
• Can a Capacitive Sensor detect charged objects?
• What is the current consumption for 2-wire DC Proximity Sensors?
• How many 2-wire DC Proximity Sensors can be connected to the input side of B7AP Power Couplers?