Primary Contents

• Can the ZX-L measure transparent objects?
• What is the maximum length of a cable connected to the Laser Measurement Sensors, Smart Amplifier "ZX-L"?
• The threshold value cannot be set. What is causing this, and what can be done to resolve it?
• How many times can the zero reset be used?
• Can Sensor Heads with different measurement distances be used for calculations between adjacent Sensors?
• What is displayed on the resolution display of channel 1 and channel 2 when performing calculations for adjacent Sensors?
• How many Sensors can be connected when performing calculations for adjacent Sensors?
• For what applications are the Reflective Line Beam Sensors most useful?
• Support Software "Smart Monitor" does not start properly. What is causing this, and what can be done to resolve it?
• Is the timer function valid for all the HIGH, PASS, and LOW judgment outputs?
• What is average processing (moving average)?
• Is there a way to detect the deterioration of the LD laser diode?
• How far away must surrounding objects be for them not to affect E4PA Ultra Sonic Displacement/Measuring Sensor?
• How long does the Laser Diode (LD) last?
• How far should E4PA Ultrasonic Sensor be separated from each other?
• What types of reflection heads are available for each surface character of sensing objects?
• How long can the cable for an Ultrasonic Displacement Sensor or Ultrasonic Sensor be extended?
• What sensing objects are hardly detected by the Ultrasonic Displacement Sensors and the Ultrasonic Sensors?
• E4PA Ultra Sonic Displacement/Measuring Sensor A1 (power indicator, green LED) and A2 (error indicator, red LED) indicators flash alternately and the E4PA is not operating properly. What is causing this, and what can we do to resolve the problem?
• How are the gain switch functions AUTO, METAL, WHITE, and BLACK used in a Reflective Sensor?
• E4PA Ultrasonic Sensors will be used to detect liquid levels, but it is difficult to move E4PA up or down when installing it. Is there an easy way to set the distance?
• Which Ultrasonic Sensors have a long detection distance?
• At the maximum sensing distance of the E4PA Ultrasonic Displacement Sensor, the output should be 20 mA but only 16 mA is output. What is causing this?
• How much does wind affect E4PA Ultrasonic Sensor?
• What is the principle of regular reflection measurements?
• What is the principle of diffuse reflective measurements?
• Are there any precautions for using E4PA Ultra Sonic Displacement Sensor to detect the liquid level in a tank?
• Does the temperature of the sensing object affect the detection ability of E4PA Ultra Sonic Displacement Sensor?
• What is resolution?
• What does the “W-UP” display mean when the power supply for ZX-E Smart Sensors or ZX-T Smart Sensors or is turned ON?
• Can the Actuator's Measurement Head of D5V Contact Displacement Sensor be replaced?
• When a command was sent using Z300 High-precision Laser Profiling System serial communications output, an error was returned. Why is this?
• When measuring an object through a window (slit) by using the Optical Type Displacement Sensors, how large should the window be?
• Can Z500 Profile Measuring System and Z550 Multi-Dimensional Sensor be used to measure the thickness of an object by connecting two Sensor Heads?
• How can the analog signal output 4-20mA of the Displacement Sensors be covered to 1-5V?
• What is the service life of Z300 High-precision Laser Profiling System?
• What problems occur when measuring hot objects with Z300 High-precision Laser Profiling System?
• What is the width resolution of the Z500 Ultrasonic Displacement Sensor?
• Does ZX-SF Communications Interface have a baud rate of 9,600 bps?
• Is the setting for the number of samples to average used for the linear output?
• Can Smart Monitor version 1.5 be used to measure the gaps in wafers through glass windows with ZS-LD200 Displacement and Measurement Sensors?