GlobalQuestion
How can the analog signal output 4-20mA of the Displacement Sensors be covered to 1-5V?
Answer
The conversion can be achieved in such a way that a voltage of 1-5V is taken from the analog output terminals to which the resistance of 250 Ω (1/4W or more) is connected in parallel.
Example:
Connection between the Displacement Sensor (analog signal output 4-20mA) and the Digital Panel Meter (DC voltage input type)
*It is required that the connecting resistance value is within the allowable load resistance of analog output of the Displacement Sensor.
*Be aware that the tolerance of resistance value of 250 Ω indicates an error of output voltage.
Recommended Products
E2E
Standard Sensors for Detecting Ferrous Metals under Standard Conditions
Other Displacement Sensors / Measurement Sensors FAQ
-
Support Software "Smart Monitor" does not start properly. What is causing this, and what can be done to resolve it?
-
Does the temperature of the sensing object affect the detection ability of E4PA Ultra Sonic Displacement Sensor?
-
When a command was sent using Z300 High-precision Laser Profiling System serial communications output, an error was returned. Why is this?
FAQ
Top of page